Vision-based tactile sensors (VBTSs) provide highresolution tactile images crucial for robot in-hand manipulation. However, force sensing in VBTSs is underutilized due to the costly and time-intensive process of acquiring paired tactile images and force labels. In this study, we introduce a transferable force prediction model, TransForce, designed to leverage collected image-force paired data for new sensors under varying illumination colors and marker patterns while improving the accuracy of predicted forces, especially in the shear direction. Our model effectively achieves translation of tactile images from the source domain to the target domain, ensuring that the generated tactile images reflect the illumination colors and marker patterns of the new sensors while accurately aligning the elastomer deformation observed in existing sensors, which is beneficial to force prediction of new sensors. As such, a recurrent force prediction model trained with generated sequential tactile images and existing force labels is employed to estimate higher-accuracy forces for new sensors with lowest average errors of 0.69 N (5.8 % in full work range) in$x$-axis, 0.70 N(5.8%) in$y$-axis, and 1.11 N(6.9%) in$z$-axis compared with models trained with single images. The experimental results also reveal that pure marker modality is more helpful than the RGB modality in improving the accuracy of force in the shear direction, while the RGB modality show better performance in the normal direction.

Cameras and LiDAR are essential sensors for autonomous vehicles. The fusion of camera and LiDAR data addresses the limitations of individual sensors but relies on precise extrinsic calibration. Recently, numerous end-to-end calibration methods have been proposed; however, most predict extrinsic parameters in a single step and lack iterative optimization capabilities. To address the increasing demand for higher accuracy, we propose a versatile iterative framework based on surrogate diffusion. This framework can enhance the performance of any calibration method without requiring architectural modifications. Specifically, the initial extrinsic parameters undergo iterative refinement through a denoising process, in which the original calibration method serves as a surrogate denoiser to estimate the final extrinsics at each step. For comparative analysis, we selected four state-of-the-art calibration methods as surrogate denoisers and compared the results of our diffusion process with those of two other iterative approaches. Extensive experiments demonstrate that when integrated with our diffusion model, all calibration methods achieve higher accuracy, improved robustness, and greater stability compared to other iterative techniques and their single-step counterparts.

Optical tactile sensors provide robots with rich force information for robot grasping in unstructured environments. The fast and accurate calibration of three-dimensional contact forces holds significance for new sensors and existing tactile sensors which may have incurred damage or aging. However, the conventional neural-network-based force calibration method necessitates a large volume of force-labeled tactile images to minimize force prediction errors, with the need for accurate Force/Torque measurement tools as well as a time-consuming data collection process. To address this challenge, we propose a novel deep domain-adaptation force calibration method, designed to transfer the force prediction ability from a calibrated optical tactile sensor to uncalibrated ones with various combinations of domain gaps, including marker presence, illumination condition, and elastomer modulus. Experimental results show the effectiveness of the proposed unsupervised force calibration method, with lowest force prediction errors of 0.102N (3.4% in full force range) for normal force, and 0.095N (6.3%) and 0.062N (4.1%) for shear forces along the x-axis and y-axis, respectively. This study presents a promising, general force calibration methodology for optical tactile sensors.