Pulsed latches, latches driven by a brief clock pulse, offer the same convenience of timing verification and optimization as flip-flop-based circuits, while retaining the advantages of latches over flip-flops. But a pulsed latch that uses a single pulse width has a lower bound on its clock period, limiting its capacity to deal with higher frequencies or operate at lowerVdd. The limitation still exists even when clock skew scheduling is employed, since the amount of skew that can be assigned and realized is practically limited due to process variation. For the first time, we formulate the problem of allocating pulse widths, out of a small discrete number of predefined widths, and scheduling clock skews, within a predefined upper bound on skew, for optimizing pulsed latch-based sequential circuits. We then present an algorithm calledPWCS_Optimize(pulse width allocation and clock skew scheduling, PWCS) to solve the problem. The allocated skews are realized through synthesis of local clock trees between pulse generators and latches, and a global clock tree between a clock source and pulse generators. Experiments with 65-nm technology demonstrate that combining a small number of different pulse widths with clock skews of up to 10% of the clock period yield the minimum achievable clock period for many benchmark circuits. The results have an average figure of merit of 0.86, where 1.0 indicates a minimum clock period, and the average reduction in area by 11%. The design flow includingPWCS_Optimize, placement and routing, and synthesis of local and global clock trees is presented and assessed with example circuits.

Pulsed latches, latches driven by a brief clock pulse, offer the convenience of flip-flop-like timing verification and optimization, while retaining superior design parameters of latches over flip-flops. But, pulsed latch-based design using a single pulse width has a limitation in reducing clock period. The limitation still exists even if clock skew scheduling is employed, since the amount of skew that can be assigned is practically limited due to process variations. The problem of allocating pulse width (out of discrete number of predefined widths) and scheduling clock skew (within prescribed upper bound) is formulated, for the first time, for optimizing pulsed latch-based sequential circuits. An allocation algorithm called PWCS_Optimize is proposed to solve the problem. Experiments with 65-nm technology demonstrate that small number of variety of pulse widths (up to 5) combined with clock skews (up to 10% of clock period) yield minimum clock period for many benchmark circuits. The design flow including PWCS_Optimize, placement and routing, and synthesis of local and global clock trees is presented and assessed with example circuits.