Analog Compute-in-Memory (CIM), leveraging non-volatile memristive devices to perform in-place computations in the analog domain, holds great potential to efficiently accelerate vector-matrix multiplications (VMM) and realize AI (Artificial Intelligence) at the edge. However, the data converters in such architectures often trade-off accuracy for high energy and area overheads, practically limiting the benefits of CIM. In this work, we present SABCIM, an array-periphery co-design approach for CIM that enables accurate computation as well as digitization of analog VMM outputs with high energy efficiency and competitive area overhead. By leveraging complementary input activations and data storage, each crossbar column generates differential analog output corresponding to the vector-vector multiplication (VVM) result, while inherently addressing underlying non-idealities. This is digitized using a compact, dual-ramp voltage-to-time converter (VTC)-based analog-to-digital converter (ADC). Benchmark results indicate that our work achieves up to $19.6 \times$ higher energy efficiency compared to state-of-the-art (SOTA), while maintaining comparable accuracies.

Recent advances in Resistive RAM (RRAM) based Computation-In-Memory (CIM) architectures highlight significant potential for accelerating data-intensive computing tasks. However, non-idealities in RRAM devices, such as variability, result in small sensing margins that can significantly affect the computational efficiency. This issue becomes even more pronounced when dealing with complex multi-operand logic operations. This paper introduces a circuit-level scheme for CIM-based multi-operand XOR logic operations, leveraging a Voltage-To-Time converter (VTC) to perform multi-phased XORs in a single clock cycle. In this approach, we exploit bitline capacitances for voltage-based sensing during computation, generating an output voltage that is linearly proportional to the operand values. This voltage is then converted into the desired logic output using the VTC design. Furthermore, low-power techniques are employed in the deployment of sense amplifiers, such as regulating power consumption during operation and disabling the amplifiers once the decision is made. Simulation results for a post-layout extracted 512x512 (256Kb) RRAM-based CIM array show that up to 16-operand XOR operation can be accurately and reliably performed as opposed to a maximum of three operands supported by state-of-the-art solutions, while offering up to 49× better figure-of-merit combining energy-efficiency and throughput.

Resistive random access memory (RRAM) based computation-in-memory (CIM) architectures are attracting a lot of attention due to their potential in performing fast and energy-efficient computing. However, the RRAM variability and non-idealities limit the computing accuracy of such architectures, especially for multi-operand logic operations. This paper pro-poses a voltage-based differential referencing-in-array scheme that enables accurate two and multi-operand logic operations for RRAM-based CIM architecture. The scheme makes use of a 2T2R cell configuration to create a complementary bitcell structure that inherently acts also as a reference during the operation execution; this results in a high sensing margin. More-over, the variation-sensitive multi-operand (N)AND operation is implemented using complementary-input (N)OR operation to further improve its accuracy. Simulation results for a post-layout extracted 512x512 (256Kb) RRAM-based CIM array show that up to 56 operand (N)OR/(N)AND operation can be accurately and reliably performed as opposed to a maximum of 4 operands supported by state-of-the-art solutions, while offering up to 11.4X better energy-efficiency.

State-of-the-art taxonomic profilers that comprise the first step in larger-context metagenomic studies have proven to be computationally intensive, i.e., while accurate, they come at the cost of high latency and energy consumption. Table Lookup operation is a primary bottleneck of today's profilers. In this paper, we first propose TL-PIM, a hardware accelerator based on the processing-in-memory (PIM) paradigm to accelerate Table Lookup. TL-PIM leverages the in-memory compute capability of emerging memory technologies along with intelligent data mapping. Then, we integrate TL-PIM into Kraken2, a state-of-the-art metagenomic profiler, and build an HW/SW co-designed profiler, called KrakenOnMem. Results from a silicon-based prototype of our emerging memory validate the design and required operations on a smaller scale. Our large-scale calibrated simulations show that KrakenOnMem can provide an average of 61.3% speedup compared to original Kraken2 for end-to-end profiling. Additionally, our design improves the energy consumption by orders of magnitude compared to the original Kraken2 while incurring a negligible area overhead.

Emerging non-volatile resistive RAM (RRAM) device technology has shown great potential to cultivate not only high-density memory storage, but also energy-efficient computing units. However, the unique challenges related to RRAM fabrication process render the traditional memory testing solutions inefficient and inadequate for high product quality. This paper presents low-cost design-for-testability (DFT) solutions that augment the testing process and improve the fault coverage. A computation-in-memory (CIM) based DFT is realized to expedite the detection and diagnosis of faults by developing logic designs involving multi-row activation. A novel addressing scheme is introduced to facilitate the diagnosis of faults. Reconfigurable logic designs are developed to detect unique RRAM faults that offer features such as programmable reference generations, period, and voltage of operation. DFT implementations are validated on a post-layout extracted platform and testing sequences are introduced by incorporating the proposed DFTs. Results show that more than 2.3× speedup and better coverage are achieved with 6× area reduction when compared with state-of-the-art solutions.

Computation-In-Memory (CIM) using memristor devices provides an energy-efficient hardware implementation of arithmetic and logic operations for numerous applications, such as neuromorphic computing and database query. However, memristor-based CIM suffers from various non-idealities such as conductance drift, read disturb, wire parasitics, endurance and device degradation. These negatively impact the computation accuracy of CIM. It is therefore essential to deal with these non-idealities and fabrication imperfections in order to harness the full potential of CIM. This paper discusses the non-ideality challenges and provides potential solutions. Furthermore, the paper outlines the potential future directions for CIM architectures.

In recent years, we are witnessing a trend moving away from conventional computer architectures towards Computation-In-Memory (CIM) based on emerging memristor devices. This is due to the fact that the performance and energy efficiency of traditional computer architectures can no longer be increased at the same pace as before. The main barriers which limit the performance and energy improvement are the memory and power walls. Thus far, the main effort from researchers is toward enabling CIM as an accelerator for specific applications. Consequently, this current application-specific nature/approach has put less emphasis on the potential general-purpose applicability of CIM, i.e., merging several accelerators into one that is less than the sum of the parts. In this paper, we demonstrate the CIM concept using a broader and generalized model. Considering this model, the state-of-the-art CIM-based logic and arithmetic primitive functions, which can be the building blocks for complex functions, are investigated. Besides, we present potential applications of CIM which provides insights into the challenges and opportunities of a generic CIM system design. Finally, we highlight the future directions regarding the construction of CIM-based systems.

Conventional von Neumann architectures cannot successfully meet the demands of emerging computation and data-intensive applications. These shortcomings can be improved by embracing new architectural paradigms using emerging technologies. In particular, Computation-In-Memory (CiM) using emerging technologies such as Resistive Random Access Memory (ReRAM) is a promising approach to meet the computational demands of data-intensive applications such as neural networks and database queries. In CiM, computation is done in an analog manner; digitization of the results is costly in several aspects, such as area, energy, and performance, which hinders the potential of CiM. In this article, we propose an efficient Voltage-Controlled-Oscillator (VCO)–based analog-to-digital converter (ADC) design to improve the performance and energy efficiency of the CiM architecture. Due to its efficiency, the proposed ADC can be assigned in a per-column manner instead of sharing one ADC among multiple columns. This will boost the parallel execution and overall efficiency of the CiM crossbar array. The proposed ADC is evaluated using a Multiplication and Accumulation (MAC) operation implemented in ReRAM-based CiM crossbar arrays. Simulations results show that our proposed ADC can distinguish up to 32 levels within 10 ns while consuming less than 5.2 pJ of energy. In addition, our proposed ADC can tolerate ≈30% variability with a negligible impact on the performance of the ADC.

Computation-in-Memory (CIM) is an emerging computing paradigm to address memory bottleneck challenges in computer architecture. A CIM unit cannot fully replace a general-purpose processor. Still, it significantly reduces the amount of data transfer between a traditional memory unit and the processor by enriching the transferred information. Data transactions between processor and memory consist of memory access addresses and values. While the main focus in the field of in-memory computing is to apply computations on the content of the memory (values), the importance of CPU-CIM address transactions and calculations for generating the sequence of access addresses for data-dominated applications is generally overlooked. However, the amount of information transactions used for “address” can easily be even more than half of the total transferred bits in many applications. In this article, we propose a circuit to perform the in-memory Address Calculation Accelerator. Our simulation results showed that calculating address sequences inside the memory (instead of the CPU) can significantly reduce the CPU-CIM address transactions and therefore contribute to considerable energy saving, latency, and bus traffic. For a chosen application of guided image filtering, in-memory address calculation results in almost two orders of magnitude reduction in address transactions over the memory bus.

With the rise of the Internet of Things (IoT), a huge market for so-called smart edge-devices is foreseen for millions of applications, like personalized healthcare and smart robotics. These devices have to bring smart computing directly where the data is generated, while coping with the limited energy budget. Conventional von-Neumann architecture fail to meet these requirements due to e.g., memory-processor data transfer bottleneck. Memristor-based computation-in-memory (CIM) has the potential to realize smart local computing for highly parallel data-dominated AI applications by exploiting the inherent properties of the architecture and the physical characteristics of the memristors. This paper provides a broad overview of CIM architecture highlighting its potential and unique properties in enabling smart local computing. Moreover, it discusses design considerations of such architectures including both crossbar array as well as peripheral circuits; special attention is given to analog-to-digital converter (ADC), as it is the most critical unit of analog-based CIM operation e.g., vector-matrix multiplication (VMM). Finally, the paper outlines the potential future directions for CIM-based edge smart computing.

Emerging computation-in-memory (CIM) paradigm offers processing and storage of data at the same physical location, thus alleviating critical memory-processor communication bottlenecks suffered by conventional von-Neumann architecture. Storage of data in a CIM architecture is analog in nature and therefore computation is performed in analog domain i.e. inputs and outputs are analog values. Since the outside computing environment is digital, analog-to-digital converters (ADC) are utilized to perform the output data conversion. However, ADC designs are bulky, power-hungry circuits that are prone to design variations and therefore, play an important role in determining the computing efficiency of CIM architectures. In this paper, we present a scalable and reliable integrate and fire circuit ADC (SRIF-ADC) design for CIM architectures, suitable for stringent power and area constraints. We devise a technique to stabilize the node receiving analog inputs that allows more rows to be activated at the same time, thereby increasing the operand size of input vectors. This allows better scalability in terms of higher parallelism of operations. We employ a self-timed variation-aware design approach and design measures to drastically reduce read disturb of memristor devices that address reliability issues related to the ADC design. In addition, we present a compact, built-in sample-and-hold circuit to replace the large-sized capacitance and built-in weighting technique to alleviate the need for post-processing. For multiply-and-accumulate (MAC) operation, our simulation results show that we can improve the computational parallelism by 3X as well as ADC conversion speed and energy efficiency are improved by 2X and 11.6X, respectively, compared to the state-of-the-art design.