Resistive random-access memory (RRAM)-based computation-in-memory (CIM) architectures offer a promising solution to meet the stringent energy efficiency demands of executing artificial intelligence (AI) algorithms directly on edge devices. However, these architectures suffer from the read-disturb problem, which can lead to accumulated computational errors over time. To maintain the required level of computational accuracy, conventional approaches rely on a static reprogramming process after a predefined number of read cycles, necessitating large counters and resulting in inefficiencies. This paper presents experimental results using real RRAM devices to analyze the read-disturb effect and builds on these insights to propose a circuit-level detection methodology for real-time monitoring of conductance drifts. The proposed method initiates reprogramming only when the device drift exceeds a defined threshold and reprogramming is actually needed. Additionally, an analytical method is developed to determine the minimum conductance state ratio needed to meet reliable detection criteria. Based on this foundation, the proposed detection technique is further optimized for dynamic identification of read-disturb effects. Experiment-augmented SPICE simulation results, using a calibrated model implemented in TSMC 40 nm CMOS technology, validate the functionality and effectiveness of the proposed detection approach. These results demonstrate its potential to improve both the reliability and efficiency of RRAM-based CIM architectures that provide up to a 4x improvement in energy-efficiency compared to traditional periodic reprogramming methods.

Timely identification of cardiac arrhythmia (abnormal heartbeats) is vital for early diagnosis of cardiovascular diseases. Wearable healthcare devices facilitate this process by recording heartbeats through electrocardiogram (ECG) signals and using AI-driven hardware to classify them into arrhythmia classes. Spiking neural networks (SNNs) are well-suited for such hardware as they consume low energy due to event-driven operation. However, their energy-efficiency and accuracy are constrained by encoding methods that translate real-valued ECG data into spikes. In this paper, we present an SNN-based ECG classification architecture featuring a new adaptive multi-threshold spike encoding scheme. This scheme adjusts encoding window and granularity based on the importance of ECG data samples, to capture essential information with fewer spikes. We develop a high-accuracy SNN model for such spike representation, by proposing a technique specifically tailored to our encoding. We design a hardware architecture for this model, which incorporates optimized layer post-processing for energy-efficient data-flow and employs fixed-point quantization for computational efficiency. Moreover, we integrate this architecture with our encoding scheme into a system-on-chip implementation using TSMC 40 nm technology. Our approach provides up to 5.1x energy-efficiency compared to state-of-the-art SNN-based ECG classifiers, with high accuracy.

Computational-In-Memory (CIM) is an energy-efficient paradigm that integrates computation directly within memory arrays, reducing the bottleneck associated with data transfer. This approach is beneficial for Artificial Intelligence (AI) applications that require on-chip learning for real-time processing. However, implementing on-chip learning in CIM architectures remains challenging due to limited throughput and energy-efficiency during both online training and inference. In conventional architectures, weight updates necessitate the inference process to halt to avoid unintended computation outcomes. To overcome this limitation, this paper presents a novel Spin-Orbit Torque (SOT)-based CIM architecture tailored for continuous on-chip learning applications, which enable weight updates without interrupting the inference. The proposed SOT bit-cell utilizes two read ports and one write port (2R1W) configuration, where one read port (1R) is dedicated to inference and one read and one write (1R1W) for on-chip learning that enables concurrent read and write operations. Our proposed architecture is evaluated at the system-level using the Generic-PDK 45 nm technology node, demonstrating 2.4× improvement in energy-efficiency and 5.4× improvement in throughput compared to state-of-the-art solutions, with minimal overhead.

Memristor-based Computation-In-Memory (CIM) has emerged as a compelling paradigm for designing energy-efficient neural network hardware. However, memristors suffer from conductance variation issue, which introduces computational errors in CIM hardware and leads to a degraded inference accuracy. In this paper, we present a hardware-aware quantization to mitigate the impact of conductance variation on CIM-based neural networks. We achieve this using the inherent characteristics of fixed-point arithmetic in CIM hardware. By tuning the bit-precision of weights, we align the conductance variation-induced errors with lower-order output bits. This reduces their numerical impact on the fixed-point output. We further decrease the residual errors by selectively discarding bits with low information and high error. This leads to error-free computations and a high inference accuracy. Our proposed methodology achieves 5.6× correct operations per unit energy compared to the conventional approach, while incurring very low hardware overheads.

Emerging device technologies such as Resistive RAMs (RRAMs) are under investigation by many researchers and semiconductor companies; not only to realize e.g., embedded non-volatile memories, but also to enable energy-efficient computing making use of new data processing paradigms such as computation-in-memory. However, such devices suffer from various non-idealities and reliability failure mechanisms (e.g., variability, endurance, and retention); these negatively impact the memory robustness and the computation accuracy. This paper discusses the non-idealities and reliability failure mechanisms for RRAM devices, provides an overview on the most popular ones. In addition, it reports detailed anlysis of some of these based on data measurements. Finally, it presents two different mitigation schemes for RRAM based accelerators; one is based on RRAM non-ideality aware quantization and conductance control for neural network accuracy enhancement while the second is based on reliability-aware biased training technique.

Computation-In-Memory (CIM) using memristor devices provides an energy-efficient hardware implementation of arithmetic and logic operations for numerous applications, such as neuromorphic computing and database query. However, memristor-based CIM suffers from various non-idealities such as conductance drift, read disturb, wire parasitics, endurance and device degradation. These negatively impact the computation accuracy of CIM. It is therefore essential to deal with these non-idealities and fabrication imperfections in order to harness the full potential of CIM. This paper discusses the non-ideality challenges and provides potential solutions. Furthermore, the paper outlines the potential future directions for CIM architectures.

With the rise of the Internet of Things (IoT), a huge market for so-called smart edge-devices is foreseen for millions of applications, like personalized healthcare and smart robotics. These devices have to bring smart computing directly where the data is generated, while coping with the limited energy budget. Conventional von-Neumann architecture fail to meet these requirements due to e.g., memory-processor data transfer bottleneck. Memristor-based computation-in-memory (CIM) has the potential to realize smart local computing for highly parallel data-dominated AI applications by exploiting the inherent properties of the architecture and the physical characteristics of the memristors. This paper provides a broad overview of CIM architecture highlighting its potential and unique properties in enabling smart local computing. Moreover, it discusses design considerations of such architectures including both crossbar array as well as peripheral circuits; special attention is given to analog-to-digital converter (ADC), as it is the most critical unit of analog-based CIM operation e.g., vector-matrix multiplication (VMM). Finally, the paper outlines the potential future directions for CIM-based edge smart computing.