Our team developed a riding ballbot (called PURE) that is dynamically stable, omnidirectional, and driven by lean-to-steer control. A hands-free admittance control scheme (HACS) was previously integrated to allow riders with different torso functions to control the robot's movements via torso leaning and twisting. Such an interface requires motor coordination skills and could result in collisions with obstacles due to low proficiency. Hence, a shared controller (SC) that limits the speed of PURE could be helpful to ensure the safety of riders. However, the self-balancing dynamics of PURE could result in a weak control authority of its motion, in which the torso motion of the rider could easily disturb the tracking of the command speed dictated by the shared controller. Thus, we proposed an interactive hands-free admittance control scheme (iHACS), with the following features to improve the speed-tracking performance of PURE: control gain personalization module and interaction compensation module. Human riding tests of simple tasks, idle-keeping and speed-limiting, were conducted to compare the performance of HACS and iHACS. Two manual wheelchair users and two able-bodied individuals participated in this study. They were instructed to use “adver-sarial” torso motions that would tax the PURE's ability to keep the ballbot idling or below a set speed, i.e., competing objectives between rider and robot. In the idle-keeping tasks, iHACS demonstrated minimal translational motion and low command speed tracking RMSE, even with significant torso lean angles. During the speed-limiting task, where the commanded speed was saturated at 0.5 m/s, the system achieved an average maximum speed of 1.1 m/s with iHACS, compared with that of over 1.9 m/s with HACS. These results suggest that iHACS can enhance PURE's control authority over the rider, which enables PURE to provide physical interactions back to the rider and results in a collaborative rider-robot synergy.

A novel wheelchair called PURE (Personalized Unique Rolling Experience) that uses hands-free (HF) torso lean-to-steer control has been developed for manual wheelchair users (mWCUs). PURE addresses limitations of current wheelchairs, such as the inability to use both hands for life experiences instead of propulsion. PURE uses a ball-based robot drivetrain to offer a compact, self-balancing, omnidirectional mobile device. A custom sensor system converts rider torso motions into direction and speed commands to control PURE, which is especially useful if a rider has minimal torso range of motion. We explored whether PURE's HF control performed as well as a traditional joystick (JS) human-robot interface and mWCUs, who may have reduced torso motion, performed as well as able-bodied users (ABUs). 10 mWCUs and 10 ABUs were trained and tested to drive PURE through courses replicating indoor environments. Each participant adjusted personal sensitivity settings for both HF and JS control. Repeated-measures MANOVA tests suggested that the effectiveness (number of collisions), efficiency (completion time), comfort (NASA TLX scores except physical demand), and robustness (index of performances) were similar for HF and JS control and between mWCUs and ABUs for all sections. These results suggest that PURE provides an effective method for controlling this new omnidirectional wheelchair by only using torso motion thus leaving both hands to be used for other tasks during propulsion.

This paper presents the design and control of a ballbot drivetrain that aims to achieve high agility, minimal footprint, and high payload capacity while maintaining dynamic stability. Two hardware platforms and analytical models were developed to test design and control methodologies. The full-scale ballbot prototype (MiaPURE) was constructed using off-the-shelf components and designed to have agility, footprint, and balance similar to that of a walking human. The planar inverted pendulum testbed (PIPTB) was developed as a reduced-order testbed for quick validation of system performance. We then proposed a simple yet robust cascaded LQR-PI controller to balance and maneuver the ballbot drivetrain with a heavy payload. This is crucial because the drivetrain is often subject to high stiction due to elastomeric components in the torque transmission system. This controller was first tested in the PIPTB to compare with traditional LQR and cascaded PI-PD controllers, and then implemented in the ballbot drivetrain. The MiaPURE drivetrain was able to carry a payload of 60 kg, achieve a maximum speed of 2.3 m/s, and come to a stop from a speed of 1.4 m/s in 2 seconds in a selected translation direction. Finally, we demonstrated the omnidirectional movement of the ballbot drivetrain in an indoor environment as a payload-carrying robot and a human-riding mobility device. Our experiments demonstrated the feasibility of using the ballbot drivetrain as a universal mobility platform with agile movements, minimal footprint, and high payload capacity using our proposed design and control methodologies.

This paper describes the development of a 1-DOF kinesthetic force display device in the form of an arm training simulator that replicates the haptic feeling of lead-pipe rigidity in the elbow joint. Patients with lead-pipe rigidity have uniformly elevated muscle tone throughout the range of motion, which is an important clinical sign for diagnosing Parkinson’s disease during a neurological examination. The simulator could provide training opportunities for healthcare trainees to learn and practice the assessment technique for lead-pipe rigidity. The simulator was driven by a series elastic actuator in order to have more accurate joint torque control in a safe and cost-effective manner for rendering abnormal muscle resistance. A mathematical model of lead-pipe rigidity based on hyperbolic tangent was proposed to recreate the elevated muscle resistance at different Unified Parkinson’s Disease Rating Scale (UPDRS) 0-3. Performance of the simulator was evaluated through benchtop tests and rigidity simulation tests. Preliminary results suggested the simulator had good torque control accuracy (an average RMSE < 0.27 Nm) and good fidelity in mimicking clinically-measured lead-pipe rigidity at UPDRS 0-3.