MOTIVATION: Multiplexed error-robust fluorescence in-situ hybridization (MERFISH) is a recent technology to obtain spatially resolved gene or transcript expression profiles in single cells for hundreds to thousands of genes in parallel. So far, no statistical framework to analyze MERFISH data is available. RESULTS: We present a Bayesian model for single cell transcript expression analysis on MERFISH data. We show that the model successfully captures uncertainty in MERFISH data and eliminates systematic biases that can occur in raw RNA molecule counts obtained with MERFISH. Our model accurately estimates transcript expression and additionally provides the full probability distribution and credible intervals for each transcript. We further show how this enables MERFISH to scale towards the whole genome while being able to control the uncertainty in obtained results. AVAILABILITY AND IMPLEMENTATION: The presented model is implemented on top of Rust-Bio (Köster, 2016) and available open-source as MERFISHtools (https://merfishtools.github.io). It can be easily installed via Bioconda (Grüning et al., 2018). The entire analysis performed in this paper is provided as a fully reproducible Snakemake (Köster and Rahmann, 2012) workflow via Zenodo (https://doi.org/10.5281/zenodo.752340). SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

Bioinformatics, (2018) doi.org/10.1093/bioinformatics/bty718 The authors of the above paper wish to inform the reader that an affiliation for Johannes Köster was not noted in the original publication and also that the ‘Availability and Implementation’ section of the abstract should have appeared as below: ‘The presented model is implemented on top of Rust-Bio (Köster, 2016) and available open-source as MERFISHtools (https://merfishtools.github.io). It can be easily installed via Bioconda (Grüning et al., 2018). The entire analysis performed in this paper is provided as a fully reproducible Snakemake (Köster and Rahmann, 2012) workflow via Zenodo (https://doi.org/10.5281/zenodo.752340).’ The paper has been corrected online.

Motivation: Genome-wide clustered, regularly interspaced, short palindromic repeat (CRISPR)-Cas9 screen has been widely used to interrogate gene functions. However, the rules to design better libraries beg further refinement. Results: We found single guide RNA (sgRNA) outliers are characterized by higher G-nucleotide counts, especially in regions distal from the PAM motif and are associated with stronger off-target activities. Furthermore, using non-targeting sgRNAs as negative controls lead to strong bias, which can be mitigated by using sgRNAs targeting multiple 'safe harbor' regions. Custom-designed screens confirmed our findings and further revealed that 19 nt sgRNAs consistently gave the best signal-to-noise ratio. Collectively, our analysis motivated the design of a new genome-wide CRISPR/Cas9 screen library and uncovered some intriguing properties of the CRISPR-Cas9 system. Availability and implementation: The MAGeCK workflow is available open source at https://bitbucket.org/liulab/mageck_nest under the MIT license. Supplementary information: Supplementary data are available at Bioinformatics online.

BACKGROUND: RNA sequencing has become a ubiquitous technology used throughout life sciences as an effective method of measuring RNA abundance quantitatively in tissues and cells. The increase in use of RNA-seq technology has led to the continuous development of new tools for every step of analysis from alignment to downstream pathway analysis. However, effectively using these analysis tools in a scalable and reproducible way can be challenging, especially for non-experts. RESULTS: Using the workflow management system Snakemake we have developed a user friendly, fast, efficient, and comprehensive pipeline for RNA-seq analysis. VIPER (Visualization Pipeline for RNA-seq analysis) is an analysis workflow that combines some of the most popular tools to take RNA-seq analysis from raw sequencing data, through alignment and quality control, into downstream differential expression and pathway analysis. VIPER has been created in a modular fashion to allow for the rapid incorporation of new tools to expand the capabilities. This capacity has already been exploited to include very recently developed tools that explore immune infiltrate and T-cell CDR (Complementarity-Determining Regions) reconstruction abilities. The pipeline has been conveniently packaged such that minimal computational skills are required to download and install the dozens of software packages that VIPER uses. CONCLUSIONS: VIPER is a comprehensive solution that performs most standard RNA-seq analyses quickly and effectively with a built-in capacity for customization and expansion.

MOTIVATION: Despite the growing popularity in using CRISPR/Cas9 technology for genome editing and gene knockout, its performance still relies on well-designed single guide RNAs (sgRNA). In this study, we propose a web application for the Design and Optimization (CRISPR-DO) of guide sequences that target both coding and non-coding regions in spCas9 CRISPR system across human, mouse, zebrafish, fly and worm genomes. CRISPR-DO uses a computational sequence model to predict sgRNA efficiency, and employs a specificity scoring function to evaluate the potential of off-target effect. It also provides information on functional conservation of target sequences, as well as the overlaps with exons, putative regulatory sequences and single-nucleotide polymorphisms (SNPs). The web application has a user-friendly genome-browser interface to facilitate the selection of the best target DNA sequences for experimental design. AVAILABILITY AND IMPLEMENTATION: CRISPR-DO is available at http://cistrome.org/crispr/ CONTACT: [email protected] or [email protected] or [email protected] information: Supplementary data are available at Bioinformatics online.

The ability to predict the response of a cancer patient to a therapeutic agent is a major goal in modern oncology that should ultimately lead to personalized treatment. Existing approaches to predicting drug sensitivity rely primarily on profiling of cancer cell line panels that have been treated with different drugs and selecting genomic or functional genomic features to regress or classify the drug response. Here, we propose a dual-layer integrated cell line-drug network model, which uses both cell line similarity network (CSN) data and drug similarity network (DSN) data to predict the drug response of a given cell line using a weighted model. Using the Cancer Cell Line Encyclopedia (CCLE) and Cancer Genome Project (CGP) studies as benchmark datasets, our single-layer model with CSN or DSN and only a single parameter achieved a prediction performance comparable to the previously generated elastic net model. When using the dual-layer model integrating both CSN and DSN, our predicted response reached a 0.6 Pearson correlation coefficient with observed responses for most drugs, which is significantly better than the previous results using the elastic net model. We have also applied the dual-layer cell line-drug integrated network model to fill in the missing drug response values in the CGP dataset. Even though the dual-layer integrated cell line-drug network model does not specifically model mutation information, it correctly predicted that BRAF mutant cell lines would be more sensitive than BRAF wild-type cell lines to three MEK1/2 inhibitors tested.

SUMMARY: Chromatin immunoprecipitation and DNase I hypersensitivity assays with high-throughput sequencing have greatly accelerated the understanding of transcriptional and epigenetic regulation, although data reuse for the community of experimental biologists has been challenging. We created a data portal CistromeFinder that can help query, evaluate and visualize publicly available Chromatin immunoprecipitation and DNase I hypersensitivity assays with high-throughput sequencing data in human and mouse. The database currently contains 6378 samples over 4391 datasets, 313 factors and 102 cell lines or cell populations. Each dataset has gone through a consistent analysis and quality control pipeline; therefore, users could evaluate the overall quality of each dataset before examining binding sites near their genes of interest. CistromeFinder is integrated with UCSC genome browser for visualization, Primer3Plus for ChIP-qPCR primer design and CistromeMap for submitting newly available datasets. It also allows users to leave comments to facilitate data evaluation and update. AVAILABILITY: http://cistrome.org/finder. CONTACT: [email protected] or [email protected].

MOTIVATION: RNA-seq has been widely used in transcriptome analysis to effectively measure gene expression levels. Although sequencing costs are rapidly decreasing, almost 70% of all the human RNA-seq samples in the gene expression omnibus do not have biological replicates and more unreplicated RNA-seq data were published than replicated RNA-seq data in 2011. Despite the large amount of single replicate studies, there is currently no satisfactory method for detecting differentially expressed genes when only a single biological replicate is available. RESULTS: We present the GFOLD (generalized fold change) algorithm to produce biologically meaningful rankings of differentially expressed genes from RNA-seq data. GFOLD assigns reliable statistics for expression changes based on the posterior distribution of log fold change. In this way, GFOLD overcomes the shortcomings of P-value and fold change calculated by existing RNA-seq analysis methods and gives more stable and biological meaningful gene rankings when only a single biological replicate is available. AVAILABILITY: The open source C/C++ program is available at http://www.tongji.edu.cn/∼zhanglab/GFOLD/index.html

MOTIVATION: With the rapid development of high-throughput sequencing technologies, the genome-wide profiling of nucleosome positioning has become increasingly affordable. Many future studies will investigate the dynamic behaviour of nucleosome positioning in cells that have different states or that are exposed to different conditions. However, a robust method to effectively identify the regions of differential nucleosome positioning (RDNPs) has not been previously available. RESULTS: We describe a novel computational approach, DiNuP, that compares nucleosome profiles generated by high-throughput sequencing under various conditions. DiNuP provides a statistical P-value for each identified RDNP based on the difference of read distributions. DiNuP also empirically estimates the false discovery rate as a cutoff when two samples have different sequencing depths and differentiate reliable RDNPs from the background noise. Evaluation of DiNuP showed it to be both sensitive and specific for the detection of changes in nucleosome location, occupancy and fuzziness. RDNPs that were identified using publicly available datasets revealed that nucleosome positioning dynamics are closely related to the epigenetic regulation of transcription. AVAILABILITY AND IMPLEMENTATION: DiNuP is implemented in Python and is freely available at http://www.tongji.edu.cn/~zhanglab/DiNuP. CONTACT: [email protected] SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

Abstract Summary: Transcription and chromatin regulators, and histone modifications play essential roles in gene expression regulation. We have created CistromeMap as a web server to provide a comprehensive knowledgebase of all of the publicly available ChIP-Seq and DNase-Seq data in mouse and human. We have also manually curated metadata to ensure annotation consistency, and developed a user-friendly display matrix for quick navigation and retrieval of data for specific factors, cells and papers. Finally, we provide users with summary statistics of ChIP-Seq and DNase-Seq studies. Availability: Freely available on the web at http://cistrome.dfci.harvard.edu/pc/ Contact: [email protected]; [email protected]

UNLABELLED: Transcription factor binding events are frequently associated with a pattern of nucleosome occupancy changes in which nucleosomes flanking the binding site increase in occupancy, while those in the vicinity of the binding site itself are displaced. Genome-wide information on enhancer proximal nucleosome occupancy can be readily acquired using ChIP-seq targeting enhancer-related histone modifications such as H3K4me2. Here, we present a software package, BINOCh that allows biologists to use such data to infer the identity of key transcription factors that regulate the response of a cell to a stimulus or determine a program of differentiation. AVAILABILITY: The BINOCh open source Python package is freely available at http://liulab.dfci.harvard.edu/BINOCh under the FreeBSD license.

UNLABELLED: We present a tool designed to characterize genome-wide protein-DNA interaction patterns from ChIP-chip and ChIP-Seq data. This stand-alone extension of our web application CEAS (cis-regulatory element annotation system) provides summary statistics on ChIP enrichment in important genomic regions such as individual chromosomes, promoters, gene bodies or exons, and infers the genes most likely to be regulated by the binding factor under study. CEAS also enables biologists to visualize the average ChIP enrichment signals over specific genomic regions, particularly allowing observation of continuous and broad ChIP enrichment that might be too subtle to detect from ChIP peaks alone. AVAILABILITY: The CEAS Python package is publicly available at http://liulab.dfci.harvard.edu/CEAS.

MOTIVATION: New generation Affymetrix oligonucleotide microarrays often have blob-like image defects that will require investigators to either repeat their hybridization assays or analyze their data with the defects left in place. We investigated the effect of analyzing a spike-in experiment on Affymetrix ENCODE tiling arrays in the presence of simulated blobs covering between 1 and 9% of the array area. Using two different ChIP-chip tiling array analysis programs (Affymetrix tiling array software, TAS, and model-based analysis of tiling arrays, MAT), we found that even the smallest blob defects significantly decreased the sensitivity and increased the false discovery rate (FDR) of the spike-in target prediction. RESULTS: We introduced a new software tool, the microarray blob remover (MBR), which allows rapid visualization, detection and removal of various blob defects from the .CEL files of different types of Affymetrix microarrays. It is shown that using MBR significantly improves the sensitivity and FDR of a tiling array analysis compared to leaving the affected probes in the analysis. AVAILABILITY: The MBR software and the sample array .CEL files used in this article are available at: http://liulab.dfci.harvard.edu/Software/MBR/MBR.htm

The availability of sequenced eukaryotic genomes and commercial oligonucleotide tiling microarrays has enabled many genomics applications. Different from expression microarrays, tiling microarrays have probes that cover the entire genome or contigs of the genome in an unbiased fashion. Currently three commercial sources provide tiling microarrays with different probe lengths and spacing, and array design characteristics. Affymetrix tiles 6 million 25-mer probes per array, which offers the lowest price per probe and the highest resolution (chromosomal distance between neighboring probe centers). Its arrays use one-color assays, so individual samples are hybridized to different arrays. NimbleGen can tile 385,000 50- to 75-mer probes, and Agilent can tile 244,000 60-mer probes per array. The latter two platforms, with longer oligonucleotide probes and two-color assays for which treatment and control samples are differentially labeled and put on the same array for competitive hybridization, have slightly better sensitivity. They are also flexible for custom array design, especially Agilent's multiplex arrays, which allow multiple samples to hybridize on different subareas of the same array. These tiling arrays offer diverse genomic applications, each with its own data analysis challenges.

Motivation: Building an accurate binding model for a transcription factor (TF) is essential to differentiate its true binding targets from those spurious ones. This is an important step toward understanding gene regulation. Results: This paper describes a boosting approach to modeling TF–DNA binding. Different from the widely used weight matrix model, which predicts TF–DNA binding based on a linear combination of position-specific contributions, our approach builds a TF binding classifier by combining a set of weight matrix based classifiers, thus yielding a non-linear binding decision rule. The proposed approach was applied to the ChIP-chip data of Saccharomyces cerevisiae. When compared with the weight matrix method, our new approach showed significant improvements on the specificity in a majority of cases. Contact: [email protected] Supplementary information: The software and the Supplementary data are available at http://biogibbs.stanford.edu/~hong2004/MotifBooster/.