In order to make robots more useful in a variety of environments, they need to be highly portable so that they can be transported to wherever they are needed, and highly storable so that they can be stored when not in use. We propose "on-site robotics", which uses parts procured at the location where the robot will be active, and propose a new solution to the problem of portability and storability. In this paper, as a proof of concept for on-site robotics, we describe a method for estimating the kinematic model of a robot by using inertial measurement units (IMU) sensor module on rigid links, estimating the relative orientation between modules from angular velocity, and estimating the relative position from the measurement of centrifugal force.At the end of this paper, as an evaluation for this method, we present an experiment in which a robot made up of wooden sticks reaches a target position. In this experiment, even if the combination of the links is changed, the robot is able to reach the target position again immediately after estimation, showing that it can operate even after being reassembled. Our implementation is available on https://github.com/hiroya1224/urdf_estimation_with_imus.

In recent years, a deep learning framework has been widely used for object pose estimation. While quaternion is a common choice for rotation representation, it cannot represent the ambiguity of the observation. In order to handle the ambiguity, the Bingham distribution is one promising solution. However, it requires complicated calculation when yielding the negative log-likelihood (NLL) loss. An alternative easy-to-implement loss function has been proposed to avoid complex computations but has difficulty expressing symmetric distribution. In this paper, we introduce a fast-computable and easy-to-implement NLL loss function for Bingham distribution. We also create the inference network and show that our loss function can capture the symmetric property of target objects from their point clouds.

The humanoid robot that can transform itself into a form according to its purpose requires whole-body motions with complex contact state transitions such as recovery from a fall and transition to the target form. To make the robot behavior in simulations closer to that in the real world for planning complex target trajectories, we need a platform that can measure the body stiffness during the motion and verify its application without being damaged by repeated motions that are prone to tipping over. In this study, we propose a small, inexpensive, and robust humanoid-vehicle transformer platform with redundant sensors and a low rigidity multi degree-of-freedom body and observe the effects of body deflection and internal forces during whole-body posture transition. By comparing the results obtained from experiments in several environments with different friction and from the simulator using a rigid body model, we were able to verify the influence of body flexibility on whole-body motion and the relationship between deflection and wrench observed by redundant sensors and movement failure.