Various studies on perception-aware planning have been proposed to enhance the state estimation accuracy of quadrotors in visually degraded environments. However, many existing methods heavily rely on prior environmental knowledge and face significant limitations in previously unknown environments with sparse localization features, which greatly limits their practical application. In this paper, we present a perception-aware planning method for quadrotor flight in unknown and feature-limited environments that properly allocates perception resources among environmental information during navigation. We introduce a viewpoint transition graph that allows for the adaptive selection of local target viewpoints, which guide the quadrotor to efficiently navigate to the goal while maintaining sufficient localizability and without being trapped in feature-limited regions. During the local planning, a novel yaw trajectory generation method that simultaneously considers exploration capability and localizability is presented. It constructs a localizable corridor via feature co-visibility evaluation to ensure localization robustness in a computationally efficient way. Through validations conducted in both simulation and real-world experiments, we demonstrate the feasibility and real-time performance of the proposed method. The source code is released for the reference of the community1

A heterogeneous micro aerial vehicles (MAV) swarm consists of resource-intensive but expensive advanced MAVs (AMAVs) and resource-limited but cost-effective basic MAVs (BMAVs), offering opportunities in diverse fields. Accurate and real-time localization is crucial for MAV swarms, but current practices lack a low-cost, high-precision, and real-time solution, especially for lightweight BMAVs. We find an opportunity to accomplish the task by transforming AMAVs into mobile localization infrastructures for BMAVs. However, turning this insight into a practical system is non-trivial due to challenges in location estimation with BMAVs’ unknown and diverse localization errors and resource allocation of AMAVs given coupled influential factors. This study proposes TransformLoc, a new framework that transforms AMAVs into mobile localization infrastructures, specifically designed for low-cost and resource- constrained BMAVs. We first design an error-aware joint location estimation model to perform intermittent joint location estimation for BMAVs and then design a proximity-driven adaptive grouping-scheduling strategy to allocate resources of AMAVs dynamically. TransformLoc achieves a collaborative, adaptive, and cost-effective localization system suitable for large-scale heterogeneous MAV swarms. We implement TransformLoc on industrial drones and validate its performance. Results show that TransformLoc outperforms baselines including SOTA up to 68% in localization performance, motivating up to 60% navigation success rate improvement.

This paper presents an efficient and safe method to avoid static and dynamic obstacles based on LiDAR. First, point cloud is used to generate a real-time local grid map for obstacle detection. Then, obstacles are clustered by DBSCAN algorithm and enclosed with minimum bounding ellipses (MBEs). In addition, data association is conducted to match each MBE with the obstacle in the current frame. Considering MBE as an observation, Kalman filter (KF) is used to estimate and predict the motion state of the obstacle. In this way, the trajectory of each obstacle in the forward time domain can be parameterized as a set of ellipses. Due to the uncertainty of the MBE, the semi-major and semi-minor axes of the parameterized ellipse are extended to ensure safety. We extend the traditional Control Barrier Function (CBF) and propose Dynamic Control Barrier Function (D-CBF). We combine D-CBF with Model Predictive Control (MPC) to implement safety-critical dynamic obstacle avoidance. Experiments in simulated and real scenarios are conducted to verify the effectiveness of our algorithm. The source code is released for the reference of the community11Code: https://github.com/jianzhuozhuTHU/MPC-D-CBF..

Autonomous navigation of ground robots has been widely used in indoor structured 2D environments, but there are still many challenges in outdoor 3D unstructured environments, especially in rough, uneven terrains. This paper proposed a plane-fitting based uneven terrain navigation framework (PUTN) to solve this problem. The implementation of PUTN is divided into three steps. First, based on Rapidly-exploring Random Trees (RRT), an improved sample-based algorithm called Plane Fitting RRT*(PF- RRT*) is proposed to obtain a sparse trajectory. Each sampling point corresponds to a custom traversability index and a fitted plane on the point cloud. These planes are connected in series to form a traversable “strip”. Second, Gaussian Process Regression is used to generate traversability of the dense trajectory interpolated from the sparse trajectory, and the sampling tree is used as the training set. Finally, local planning is performed using nonlinear model predictive control (NMPC). By adding the traversability index and uncertainty to the cost function, and adding obstacles generated by the real-time point cloud to the constraint function, a safe motion planning algorithm with smooth speed and strong robustness is available. Experiments in real scenarios are conducted to verify the effectiveness of the method. The source code is released for the reference of the community11Source code: https://github.com/jianzhuozhuTHU/putn..