Resource-constrained embedded systems must efficiently execute heterogeneous workloads spanning multiple application domains. This paper presents a quantitative comparison between clustered SPMD multi-core execution and SIMD vector execution using a common benchmark suite representative of several embedded scenarios. Experiments are conducted on two open-source RISC-V architectures—the PULP cluster and the Spatz vector processor—combining benchmark results with post-layout measurements from GlobalFoundries 12 nm (GF12) implementations to enable a fair Performance, Power, and Area (PPA) assessment. For compute-intensive workloads with regular memory access patterns, Spatz achieves up to 6.86 × higher performance and 2.52 × higher energy efficiency than the PULP cluster, thanks to its higher operating frequency (1 GHz vs. 600 MHz) enabled by a more regular microarchitecture and predictable access patterns well matched to the applications. Conversely, workloads characterized by irregular memory accesses, complex control flow, reductions, or loop-carried dependencies favor the PULP cluster, which delivers up to 3.54 × higher performance and 5.72 × higher energy efficiency. Overall, the results show that vector execution can offer substantial performance and efficiency benefits when well matched to the application domain. However, its higher degree of specialization increases sensitivity to workload characteristics, making it a high-reward but high-risk choice as a standalone System on-Chip (SoC) accelerator that requires strong priori knowledge of the target workloads.

Transformer-based models excel in NLP, vision, and audio processing, but the softmax operator can be a performance bottleneck, especially with optimized matrix-multiplication hard-ware. We introduce SoftEx, a parametric accelerator for BF16 softmax, using approximate exponentiation «0.14% relative error) to boost softmax calculation. Integrated into a 12nm octa-core RISC-V cluster together with a matrix-multiplication systolic array, SoftEx reduces time and energy for attention probability computation by up to 10.8x and 26.8x, boosting MobileBERT throughput by 2.17x to 324 GOPS or 1.30 TOPS/W.

Most Wearable Ultrasound (WUS) devices lack the computational power to process signals at the edge, instead relying on remote offload, which introduces latency, high power consumption, and privacy concerns. We present Maestro, a RISC-V SoC with unified Vector-Tensor Unit (VTU) and memory-coupled Fast Fourier Transform (FFT) accelerators targeting edge processing for wearable ultrasound devices, fabricated using low-cost TSMC 65nm CMOS technology. The VTU achieves peak 302GFLOPS/W and 19.8GFLOPS at FP16, while the multi-precision 16/32-bit floating-point FFT accelerator delivers peak 60.6GFLOPS/W and 3.6GFLOPS at FP16. We evaluate Maestro on a US-based gesture recognition task, achieving 1.62GFLOPS in signal processing at 26.68GFLOPS/W, and 19.52GFLOPS in Convolutional Neural Network (CNN) workloads at 298.03GFLOPS/W. Compared to a state-of-the-art SoC with a similar mission profile, Maestro achieves a$5\times $speedup while consuming only 12mW, with an energy consumption of 2.5mJ in a wearable US channel preprocessing and ML-based postprocessing pipeline.

Space Cyber-Physical Systems such as spacecraft and satellites strongly rely on the reliability of onboard computers to guarantee the success of their missions. Relying solely on radiation-hardened technologies is extremely expensive, and developing inflexible architectural and microarchitectural modifications to introduce modular redundancy within a system leads to significant area increase and performance degradation. To mitigate the overheads of traditional radiation hardening and modular redundancy approaches, we present a novel Hybrid Modular Redundancy approach, a redundancy scheme that features a cluster of RISC-V processors with a flexible on-demand dual-core and triple-core lockstep grouping of computing cores with runtime split-lock capabilities. Further, we propose two recovery approaches, software-based and hardware-based, trading off performance and area overhead. Running at 430 MHz, our fault-tolerant cluster achieves up to 1,160 MOPS on a matrix multiplication benchmark when configured in non-redundant mode and 617 and 414 MOPS in dual and triple mode, respectively. A software-based recovery in triple mode requires 363 clock cycles and occupies 0.612 mm 2 , representing a 1.3% area overhead over a non-redundant 12-core RISC-V cluster. As a high-performance alternative, a new hardware-based method provides rapid fault recovery in just 24 clock cycles and occupies 0.660 mm 2 , namely, ∼9.4% area overhead over the baseline non-redundant RISC-V cluster. The cluster is also enhanced with split-lock capabilities to enter one of the available redundant modes with minimum performance loss, allowing execution of a mission-critical portion of code when in independent mode, or a performance section when in a reliability mode, with <400 clock cycles overhead for entry and exit. The proposed system is the first to integrate these functionalities on an open-source RISC-V-based compute device, enabling finely tunable reliability versus performance trade-offs.

The rapid advancement of energy-efficient parallel ultra-low-power (ULP)$\mu$controllers units (MCUs) is enabling the development of autonomous nano-sized unmanned aerial vehicles (nano-UAVs). These sub-10cm drones represent the next generation of unobtrusive robotic helpers and ubiquitous smart sensors. However, nano-UAVs face significant power and payload constraints while requiring advanced computing capabilities akin to standard drones, including real-time Machine Learning (ML) performance and the safe co-existence of general-purpose and real-time OSs. Although some advanced parallel ULP MCUs offer the necessary ML computing capabilities within the prescribed power limits, they rely on small main memories ($<$1MB) and$\mu$controller-class CPUs with no virtualization or security features, and hence only support simple bare-metal runtimes. In this work, we present Shaheen, a 9mm$^{\textbf{2}}$200mW SoC implemented in 22nm FDX technology. Differently from state-of-the-art MCUs, Shaheen integrates a Linux-capable RV64 core, compliant with the v1.0 ratified Hypervisor extension and equipped with timing channel protection, along with a low-cost and low-power memory controller exposing up to 512MB of off-chip low-cost low-power HyperRAM directly to the CPU. At the same time, it integrates a fully programmable energy-and area-efficient multi-core cluster of RV32 cores optimized for general-purpose DSP as well as reduced-and mixed-precision ML. To the best of the authors’ knowledge, it is the first silicon prototype of a ULP SoC coupling the RV64 and RV32 cores in a heterogeneous host+accelerator architecture fully based on the RISC-V ISA. We demonstrate the capabilities of the proposed SoC on a wide range of benchmarks relevant to nano-UAV applications including general-purpose DSP as well as inference and online learning of quantized DNNs. The cluster can deliver up to 90GOp/s and up to 1.8TOp/s/W on 2-bit integer kernels and up to 7.9GFLOp/s and up to 150GFLOp/s/W on 16-bit FP kernels.

IoT applications span a wide range in performance and memory footprint, under tight cost and power constraints. High-end applications rely on power-hungry Systems-on-Chip (SoCs) featuring powerful processors, large LPDDR/DDR3/4/5 memories, and supporting full-fledged Operating Systems (OS). On the contrary, low-end applications typically rely on Ultra-Low-Power μcontrollers with a “close to metal” software en-vironment and simple micro-kernel-based runtimes. Emerging applications and trends of IoT require the “best of both worlds”: cheap and low-power SoC systems with a well-known and agile software environment based on full-fledged OS (e.g., Linux), coupled with extreme energy efficiency and parallel digital signal processing capabilities. We present HULK-V: an open-source Heterogeneous Linux-capable RISC-V-based SoC coupling a 64-bit RISC-V processor with an 8-core Programmable Multi-Core Accelerator (PMCA), delivering up to 13.8 GOps, up to 157 GOps/W and accelerating the execution of complex DSP and ML tasks by up to 112× over the host processor. HULK-V leverages a lightweight, fully digital memory hierarchy based on HyperRAM IoT DRAM that exposes up to 512 MB of DRAM memory to the host CPU. Featuring HyperRAMs, HULK-V doubles the energy efficiency without significant performance loss compared to featuring power-hungry LPDDR memories, requiring expensive and large mixed-signal PHYs. HULK-V, implemented in Global Foundries 22nm FDX technology, is a fully digital ultra-low-cost SoC running a 64-bit Linux software stack with OpenMP host-to-PMCA offload within a power envelope of just 250 mW.

Due to their flexibility and openness, the RISC-V ISA and processor architectures have emerged as notable contenders in various application domains. Their advantages over commercial solutions have attracted the interest of academia and industry and even led to their planned adoption in aeronautics and space. However, in these demanding environments, system reliability is of paramount importance. To address this issue, this paper presents an overview of several hardware-centric approaches for developing reliable systems based on the parallel-ultra low power (PULP) open-source RISC-V hardware platform. These approaches range from gate-level optimizations to system-level improvements and highlight the versatility of the PULP architecture and its potential as a viable architecture for developing various aerospace platforms.

Open Source Hardware, the way it should be!

The fast proliferation of extreme-edge applications using Deep Learning (DL) based algorithms required dedicated hardware to satisfy extreme-edge applications' latency, through-put, and precision requirements. While inference is achievable in practical cases, online finetuning and adaptation of general DL models are still highly challenging. One of the key stumbling stones is the need for parallel floating-point operations, which are considered unaffordable on sub-100 mW extreme-edge SoCs. We tackle this problem with RedMulE (Reduced-precision ma-trix Multiplication Engine), a parametric low-power hardware accelerator for FP16 matrix multiplications - the main kernel of DL training and inference - conceived for tight integration within a cluster of tiny RISC- V cores based on the PULP (Parallel Ultra-Low-Power) architecture. In 22 nm technology, a 32-FMA RedMulE instance occupies just 0.07mm2(14% of an 8-core RISC- V cluster) and achieves up to 666 MHz maximum operating frequency, for a throughput of 31.6 MAC/cycle (98.8% utilization). We reach a cluster-level power consumption of 43.5 mW and a full-cluster energy efficiency of 688 16-bit GFLOPS/W. Overall, RedMulE features up to 4.65 x higher energy efficiency and 22 x speedup over SW execution on 8 RISC- V cores.