Similar Morphology Cells (SMCs) play a critical role in pathology diagnosis. This study identifies and defines two primary challenges for SMCs segmentation based on detailed investigation. At the macro level of slides, the sample distribution within pathology images is highly imbalanced due to varying cell functionalities. At the micro level of cells, differences between SMCs are imperceptible. These two challenges lead to confusion between visually similar cell classes in SMCs segmentation, reducing segmentation accuracy. To address these issues, we propose Sharper Insights (SI), a novel approach designed to enhance the model’s discriminative capabilities. Specifically, we introduce a Discrimination Enhancement Module (DEM) to increase the model’s sensitivity to subtle variations among SMCs. This module utilizes two attention mechanisms to sharpen the model’s focus on minute differences. Additionally, a novel loss function, Minority Categories Augmentation (MCA), is introduced to mitigate distribution imbalance by dynamically adjusting category-specific weights. Finally, to verify the effectiveness and generalization of the proposed method SI, we curate a comprehensive breast cancer dataset SimMorphBC. It primarily focuses on SMCs, which have not been explicitly proposed in previous datasets. Extensive experiments on breast cancer pathology images demonstrate the superior performance of the proposed approach.

Automated manipulation of deformable objects is challenging due to the object’s deformation behavior. Different from still deformable objects such as wires and cloth, biological organisms such as sperm and worms are both deformable and motile, requiring the control of both deformation and motion. This paper reports automated orientation control of live sperm, as an example of motile deformable cells. Robotic manipulation of human sperm was performed by using a glass micropipette, which is a standard clinical tool, to rotate individual motile sperm. Sperm rotation must be performed before immobilization, as required in clinical cell surgery for infertility treatment. To control tail deformation during sperm rotation, a path planner was designed based on kinematic analysis and manipulation point update. To deal with the intrinsic motion of a motile sperm, a motorized stage was controlled to compensate for sperm swimming motion, and an observer was designed to decouple sperm orientation from its wiggling motion. A sliding mode controller was designed to cope with stiffness variances along the sperm tail and among different sperm. Deep neural networks were developed for robust sperm tail detection, and Kalman filter was used to predict tail motion. Experimental results demonstrated that automated sperm manipulation achieved an orientation error of 0.8° and operation time of 6.8 s, both significantly less than those of manual operation. The designed observer was effective to reduce sperm orientation error by reducing the disturbance from sperm wiggling motion. The developed sliding mode controller outperformed the PID controller in operation time, reducing the time of oocyte exposure to the ambient environment.Note to Practitioners—This work tackled the challenge of rotating a fast-swimming and deformable sperm in clinical cell surgeries. Automated manipulation of deformable objects has wide applications in industrial and service settings such as manipulating wires and folding cloth. However, the intrinsic motion of a motile sperm and the lack of a rotational degree of freedom in standard micromanipulators pose difficulties to automated sperm manipulation. In this paper, we propose automation techniques for sperm orientation control. For sperm tail detection, deep learning was used to handle the variances of shape and length among different sperm. A path planning strategy and a controller were designed to achieve automated rotation of motile sperm, with its deformation and motion both controlled. The developed methods can be generalized to the manipulation of other deformable objects such as wires, cables and cloth. These objects exhibit significant variance of mechanical properties, and calibration is often time-consuming. The designed controller can be used to manipulate deformable objects with robustness to varied mechanical parameters. Path planning was designed by updating the manipulation point based on the object’s deformation behavior, and is suitable in manipulation where constraints are imposed such as the object’s strain.

This article addresses the trajectory consensus problem of coordinating the trajectories of vehicles at multiple future time points. The objective is the consensus of the geometry of the vehicles' planned trajectories. The geometric feature of trajectories is parameterized by a set of trajectory states defined as required lengths along the trajectory to reduce the distance to its ending point to specific values. To solve this special consensus problem involving coupled state variables, the conventional consensus model is extended by attaching it to a mapping from the state variables to the trajectory's geometry. This mapping is established using a homotopic structure that creates a compact and efficient form for the mapping. The geometry of the homotopic structure is based on the shapes of its envelopes, and the elements in the structure are derived from their deformation. Through a homotopic search in the structure, an asymptotic consensus of trajectory states is achieved. Simulation results show the proposed coupled state consensus method can achieve better performance on the consensus of multiple vehicles than the conventional isolated state consensus method.

Existing approaches for robotic control of magnetic swarms are not capable of generating magnetic aggregates precisely in an arbitrarily specified target region in a fluidic flow environment. Such a swarm control capability is demanded by medical applications such as clinical embolization (i.e., localized clogging of blood vessels). This paper presents a new magnetic swarm control strategy to generate aggregates only in a specified target region under fluidic flow. Within the target region, the magnetic field generates sufficiently large magnetic forces among magnetic particles to maintain the aggregates' integrity at the junctions of blood vessels. In contrast, unintended aggregates outside the target region are disassembled by fluidic shear. The aggregation control approach achieved a mean absolute error of 0.15 mm in positioning a target region and a mean absolute error of 0.30 mm in controlling the target region's radius. With thrombin coating, 1 μm magnetic particles were controlled to perform embolization both in vitro (using microfluidic channel networks) and ex vivo (using porcine tissue). Experiments proved the effectiveness of the swarm control technique for on-demand, targeted embolization.

This article reports an automated optically-induced dielectrophoresis (ODEP) system for characterizing the specific membrane capacitance (SMC) of individual cells. The simulation of cell motion is conducted to analyze the electrokinetic forces acting on the cell. A self-developed visual tracking algorithm for multicells is used to realize an automated process for determining the frequency-sweeping range, crossover frequencies, and cell radii. The SMC values of malignant bladder cancer cells (T24 and RT4) and normal urothelial cells (SV-HUC-1) were quantified using the automated system, demonstrating that the system has a measurement speed of ~1 cell/s, an accuracy of 1 kHz for the crossover frequency determination, and an accuracy of 0.2 μm for the cell radius measurement.