Time resolved three-dimensional (3D) echocardiography generates four-dimensional (3D+time) data sets that bring new possibilities in clinical practice. Image quality of four-dimensional (4D) echocardiography is however regarded as poorer compared to conventional echocardiography where time-resolved 2D imaging is used. Advanced image processing filtering methods can be used to achieve image improvements but to the cost of heavy data processing. The recent development of graphics processing unit (GPUs) enables highly parallel general purpose computations, that considerably reduces the computational time of advanced image filtering methods. In this study multidimensional adaptive filtering of 4D echocardiography was performed using GPUs. Filtering was done using multiple kernels implemented in OpenCL (open computing language) working on multiple subsets of the data. Our results show a substantial speed increase of up to 74 times, resulting in a total filtering time less than 30 s on a common desktop. This implies that advanced adaptive image processing can be accomplished in conjunction with a clinical examination. Since the presented GPU processor method scales linearly with the number of processing elements, we expect it to continue scaling with the expected future increases in number of processing elements. This should be contrasted with the increases in data set sizes in the near future following the further improvements in ultrasound probes and measuring devices. It is concluded that GPUs facilitate the use of demanding adaptive image filtering techniques that in turn enhance 4D echocardiographic data sets. The presented general methodology of implementing parallelism using GPUs is also applicable for other medical modalities that generate multidimensional data.

Autonomous vehicles are being increasingly introduced in the mining industry. While these may offer high safety and high productivity, fully autonomous solutions are not always applicable or economically viable. Teleoperation is an attractive option, since it increases safety and comfort of the drivers. Unfortunately, the difficulty to operate the vehicle remotely often results in reduced productivity. In this paper, we show that techniques from the field of mobile robotics can be used to mitigate this problem. We extend a commercial teleoperation system for use in underground mines with a local autonomy functionality, with the main purpose to evaluate if the achieved productivity improvement motivates development of general algorithms and a fully commercial implementation. We then describe a user study performed in an underground mine with a 38 tonne articulated wheel loader, which proves that local autonomy gives a significant improvement in productivity of the teleoperation system, while retaining or even reducing the maintenance costs.

In this paper we propose a new feature detection algorithm to enable junction recognition intended for high speed reactive navigation in tunnel like environments. We also present an extensive experimental evaluation of the algorithm based on data recorded in a real mine. The algorithm is faster and has less environmental constraints than similar algorithms that can be found in the literature.

Robotic middlewares increasingly allow the seamless integration of multiple heterogeneous robots into one distributed system. Unfortunately, very simple devices like tagged everyday objects and smart objects are left orphan in this otherwise pervasive trend. We claim that the inclusion of simple everyday objects as part of distributed robot systems would have many advantages, and propose a design pattern to allow this inclusion. We make this pattern concrete by describing an implementation of it using a specific multi-robot middleware, called PEIS-Ecology Middleware. We also show an illustrative experiment which integrates everyday objects in a smart home equipped with mobile robots as well as more advanced distributed sensor nodes.

The vision of an ecology of physically embedded intelligent systems, or PEIS-Ecology, combines insights from the fields of autonomous robotics and ambient intelligence to provide a new approach to building robotic systems in the service of people. In this paper, we present this vision, and we report the results of a four-year collaborative research project between Sweden and Korea aimed at the concrete realization of this vision.We focus in particular on three results: a robotic middleware able to cope with highly heterogeneous systems; a technique for autonomous self-configuration and reconfiguration; and a study of the problem of sharing information of both physical and digital nature.

The fields of autonomous robotics and ambient intelligence are converging toward the vision of smart robotic environments, in which tasks are performed via the cooperation of many networked robotic devices. To enable this vision, we need a common communication and cooperation model that can be shared between robotic devices at different scales, ranging from standard mobile robots to tiny embedded devices. Unfortunately, today's robot middlewares are too heavy to run on tiny devices, and middlewares for embedded devices are too simple to support the cooperation models needed by an autonomous smart environment. In this paper, we propose a middleware model which allows the seamless integration of standard robots and simple off-the-shelf embedded devices. Our middleware is suitable for building truly ubiquitous robotics applications, in which devices of very different scales and capabilities can cooperate in a uniform way. We discuss the principles and implementation of our middleware, and show an experiment in which a mobile robot, a commercial mote, and a custom-built mote cooperate in a home service scenario.

Robot ecologies provide a new paradigm for assistive, service, industrial, and entertainment robotics which is quickly gaining popularity. These ecologies contain a large number of robotic components pervasively embedded in the environment and interacting with each other. Human users of such systems need to be able to interface with both the system as a w hole and, if desired, which each individual component. The humans should be able to transmit, in a natural way, commands that range from basic ones, such as "turn on the lights in the bedroom", to abstract ones, such as "bring me a cup of coffee". Human users may also need to interact with task execution, especially at decision points. In this paper, we introduce an approach to interface a human user to a specific type of robot ecology, called an ecology of Physically Embedded Intelligent Systems, or PEIS-Ecology. The ecology includes simple sensors and actuators and more complicated devices such as mobile robots. The proposed interface satisfies two requirements: 1) to easily and automatically generate component interfaces, and 2) to provide a simple mechanism by which to request and monitor the execution of tasks in the ecology.

We present a new approach for odour detection and recognition based on a so-called PEIS-Ecology: a network of gas sensors and a mobile robot are integrated in an intelligent environment. The environment can provide information regarding the location of potential odour sources, which is then relayed to a mobile robot equipped with an electronic nose. The robot can then perform a more thorough analysis of the odour character. This is a novel approach which alleviates some the challenges in mobile olfaction techniques by single and embedded mobile robots. The environment also provides contextual information which can be used to constrain the learning of odours, which is shown to improve classification performance

We introduce the concept of ecology of physically embedded intelligent systems, or PEIS-ecology. This is a network of heterogeneous robotic devices (PEIS) pervasively embedded in the environment. A PEIS can be as simple as a toaster and as complex as a humanoid robot. PEIS can exchange information at different levels of abstraction, and share both physical and virtual functionalities to perform complex tasks. By putting together insights from the fields of autonomous robotics and of ambient intelligence, the PEIS-ecology approach explores a new road to building assistive, personal, and service robots. In this paper, we discuss this concept, describe a first realization of it, and show an implemented use-case scenario

Olfaction is a challenging new sensing modality for intelligent systems. With the emergence of electronic noses it is now possible to detect and recognise a range of different odours for a variety of applications. An existing application is to use electronic olfaction on mobile robots for the purpose of odour based navigation. In this work, we introduce a new application where electronic olfaction is used in cooperation with other types of sensors on a mobile robot in order to acquire the odour property of objects. The mobility of the robot facilitates the execution of specific perceptual actions, such as moving closer to objects to acquire odour properties. Additional sensing modalities provides the spatial detection of objects and electronic olfaction then acquires the odour property which can be used for discrimination and recognition of the object being considered. We examine the problem of deciding when, how and where the e-nose should be activated by planning for active perception. We investigate the use of symbolic reasoning techniques in this context and consider the problem of integrating the information provided by the e-nose with both prior information and information from other sensors (e.g., vision). Finally, experiments are performed on a mobile robot equipped with an e-nose together with a variety of sensors that can perform decision making tasks in realistic environments.