This paper proposes a hierarchical task-oriented whole-body locomotion framework for the exoskeleton walking-cart pushing (EWCP) task, which includes a straight gait and a bypassing gait, allowing the exoskeleton robot to avoid obstacles during walking. In this framework, the core components are gait planning and phase estimation for locomotion in unstructured environments. Notably, our mobile redundancy exoskeleton system can provide more flexibility and versatility in manipulation when performing complex tasks. For the hierarchical task-oriented whole-body locomotion, the detour gait consists of straight lines and turning shapes so that the EWCP system can avoid obstacles on the ground. For gait planning, we use the dynamic motion primitives to learn the joint motion trajectory of whole-body locomotion, which has good generalization ability and adaptability with respect to the gait. For phase estimation, the current gait phase can be estimated from the joint angles. Additionally, we design an task switching mechanism, where the exoskeleton system can switch different configurations flexibly for different scenarios, such as track switching only with both feet supported. And the phase estimation and gait switching strategy ensure the stability of task switching. The experimental results show that the exoskeleton can effectively accomplish EWCP tasks in an environment with obstacles. Our work has also shown that even some challenging motion tasks can be implemented with relatively simple controllers, which greatly simplifies the design of control systems.Note to Practitioners—This paper is motivated by issues of hierarchical tasks of the lower limb exoskeleton. Traditional exoskeletons cannot achieve obstacle avoidance in complex scenes because they do not have enough degrees of freedom or they do not use hierarchical locomotion. In this paper, a hierarchical task-oriented whole-body locomotion is proposed, which includes a straight gait and a bypassing gait, allowing the exoskeleton robot to avoid obstacles during walking. For gait planning, we use DMP to generate the gait trajectory, which can ensure the smoothness of trajectory. For phase estimation, the current gait phase can be estimated from the joint angles. Additionally, we design an task switching mechanism, where the exoskeleton system can switch different configurations flexibly for different scenarios, such as track switching only with both feet supported. And the phase estimation and gait switching strategy ensure the stability of task switching. The proposed hierarchical task-oriented whole-body locomotion framework is expected to be applied to exoskeletons to assist patients in rehabilitation training and users in mobility in daily life. Additionally, the proposed framework uses a series of motion primitives to learn and reproduce the trajectory and update it online, which requires a heavy computation load calculation to ensure the update speed of the trajectory. Therefore, we expect to reduce computation complexity for a walking exoskeleton in the future.

This paper proposes a hybrid long short-term motor (HLSM) optimization and control approach for a walking exoskeleton. It consists of long-term global optimization, short-term local optimization, human-in-the-loop trajectory adaptation, and hybrid cerebellar model articulation controller (HCMAC). In the long-term global optimization, a graphic Spiking Neural Network (SNN) is utilized for an optimal global path. Along the path, the short-term motor optimization includes footstep optimization and obtains a sequence of footsteps. While in response to the unexpected obstacles along the footstep sequence, a human-in-the-loop planning strategy is designed by a virtual impedance model between the Centers of Mass (COMs) of the human and the exoskeleton, regulating the COM of the exoskeleton and generating footstep adaptation of the exoskeleton such that the exoskeleton can avoid obstacles and maintain its original global trajectory. Moreover, considering the unmodeled dynamics, we propose an HCMAC based on an integral Lyapunov function, which is exploited to counteract the system's nonlinear uncertainties, external disturbances, and reduces a relatively high computational cost. We validate the effectiveness of the HLSM planner and controller in a practical indoor setting. The results demonstrate the effectiveness of HLSM planning and control in a real scenario for a walking exoskeleton.

In order to provide design guidelines for energy efficient 6G networks, we propose a novel radial basis function (RBF) based optimization framework to maximize the integrated relative energy efficiency (IREE) metric. Different from the conventional energy efficient optimization schemes, we maximize the transformed utility for any given IREE using spectrum efficiency oriented RBF network and gradually update the IREE metric using proposed Dinkelbach’s algorithm. The existence and uniqueness properties of RBF networks are provided, and the convergence conditions of the entire framework are discussed as well. Through some numerical experiments, we show that the proposed IREE outperforms many existing SE or EE oriented designs and find a new Jensen-Shannon (JS) divergence constrained region, which behaves differently from the conventional EE-SE region. Meanwhile, by studying IREE-SE trade-offs under different traffic requirements, we suggest that network operators shall spend more efforts to balance the distributions of traffic demands and network capacities in order to improve the IREE performance, especially when the spatial variations of the traffic distribution are significant.

Wearable walking exoskeletons show great potentials in helping patients with neuro musculoskeletal stroke. Key to the successful applications is the design of effective walking trajectories that enable smooth walking for exoskeletons. This work proposes a walking planning method based on the divergent component of motion to obtain a stable joint angle trajectory. Since periodic and nonperiodic disturbances are ubiquitous in the repeating walking motion of an exoskeleton system, a major challenge in the walking control of wearable exoskeleton is the joint angle drift problem, that is, the joint angle motion trajectories are not necessarily periodic due to the presence of disturbance. To address this challenge, this work develops an adaptive repetitive control strategy to guarantee that the motion trajectories of joint angle are repetitive. In particular, by treating the disturbance as system uncertainties, an adaptive controller is designed to compensate for the uncertainties based on an integral-type Lyapunov function. A fully saturated learning approach is then developed to achieve asymptotic tracking of repetitive walking trajectories. Extensive experiments are carried out to demonstrate the effectiveness of the tracking performance.

This article presents a human-in-the-loop cooperative control of a walking exoskeleton to provide assistance to the user and enhance human mobility. First, a dynamic mathematical model of the human-exoskeleton system is derived, and then, a human-in-the-loop cooperative control framework is proposed in two ways: separable cooperative control (SCC) and interactive cooperative control (ICC), respectively. The SCC introduces a space division of the human and the exoskeleton, while the ICC allows the robot to perceive the human intention and follows human motor, thereby improving the collaborative performance. The ICC formulates the impedance connection between the human and the exoskeleton in the divided orthogonal subspaces of walking, such that the robot is able to modify its position of center of mass (COM) when its motor trajectory deviates the one of the human. In addition, a novel adaptation control is proposed to deal with the unmodeled dynamics and trajectory tracking. Finally, to validate the effectiveness of our proposed controller, a series of experiments are conducted in three adults in gait at different speeds. It shows that the proposed controller can preserve the periodic walking gait and inherit the robustness of dealing with perturbations during walking.

Soft exo-suit could facilitate walking assistance activities (such as level walking, upslope, and downslope) for unimpaired individuals. In this article, a novel human-in-the-loop adaptive control scheme is presented for a soft exo-suit, which provides ankle plantarflexion assistance with unknown human-exosuit dynamic model parameters. First, the human-exosuit coupled dynamic model is formulated to express the mathematical relationship between the exo-suit actuation system and the human ankle joint. Then, a gait detection approach, including plantarflexion assistance timing and planning, is proposed. Inspired by the control strategy that is used by the human central nervous system (CNS) to handle interaction tasks, a human-in-the-loop adaptive controller is proposed to adapt the unknown exo-suit actuator dynamics and human ankle impedance. The proposed controller can emulate human CNS behaviors which adapt feedforward force and environment impedance in interaction tasks. The resulting adaptation of actuator dynamics and ankle impedance is demonstrated with five unimpaired subjects and implemented on a developed soft exo-suit. The human-like adaptivity is performed by the exo-suit in several human walking speeds and illustrates the promising potential of the novel controller.

The generation of motor adaptation in response to mechanical perturbation during human walking is seldom considered in an exoskeleton system. Reshaping step trajectory over consecutive gait cycles for a walking exoskeleton is investigated in this article. Step adjustment of a walking exoskeleton can adapt to human walking intention by shaping step trajectory. This work develops an admittance adaptive fuzzy control strategy for a walking exoskeleton robot to provide assistance for human lower limb movement. Considering human walking intention and utilizing an admittance model, it shapes a reference trajectory to ensure that the walking exoskeleton follows it according to the human–robot force produced by its wearer. Considering a nonlinear and dynamic model with uncertainties, this work designs an integral-type Lyapunov function controller to track a reference trajectory. A disturbance observer is integrated into the controller design to compensate for uncertain disturbance in order to achieve an effective tracking performance. Finally, this work conducts experiments on two healthy subjects with the proposed method on a walking exoskeleton to validate its effectiveness. The results show that it can be applied to walking exoskeletons to enhance human mobility.