Computer-Aided Design (CAD) models are typically constructed by sequentially drawing parametric sketches and applying CAD operations to obtain a 3D model. The problem of 3D CAD reverse engineering consists of reconstructing the sketch and CAD operation sequences from 3D representations such as point clouds. In this paper, we address this challenge through novel contributions across three levels: CAD sequence representation, network design, and training dataset. In particular, we represent CAD sketch-extrude sequences as Python code. The proposed CAD-Recode translates a point cloud into Python code that, when executed, reconstructs the CAD model. Taking advantage of the exposure of pre-trained Large Language Models (LLMs) to Python code, we leverage a relatively small LLM as a decoder for CAD-Recode and combine it with a lightweight point cloud projector. CAD-Recode is trained on a procedurally generated dataset of one million CAD sequences. CAD-Recode significantly outperforms existing methods across the DeepCAD, Fusion360 and real-world CC3D datasets. Furthermore, we show that our CAD Python code output is interpretable by off-the-shelf LLMs, enabling CAD editing and CAD-specific question answering from point clouds.

Reverse engineering in the realm of Computer-Aided Design (CAD) has been a longstanding aspiration, though not yet entirely realized. Its primary aim is to uncover the CAD process behind a physical object given its 3D scan. We propose CAD-SIGNet, an end-to-end trainable and aetoregressive architecture to recover the design history of a CAD model represented as a sequence of sketch-and-extrusion from an input point cloud. Our model learns CAD visual-language representations by layer-wise crossattention between point cloud and CAD language embedding. In particular, a new Sketch instance Guided Attention (SGA) module is proposed in order to reconstruct the finegrained details of the sketches. Thanks to its auto-regressive nature, CAD-SIGNet not only reconstructs a unique full design history of the corresponding CAD model given an input point cloud but also provides multiple plausible design choices. This allows for an interactive reverse engineering scenario by providing designers with multiple next step choices along with the design process. Extensive experiments on publicly available CAD datasets showcase the effectiveness of our approach against existing baseline models in two settings, namely, full design history recovery and conditional auto-completion from point clouds.

Within the realm of Computer-Aided Design (CAD), Boundary-Representation (B-Rep) is the standard option for modeling shapes. We present SpelsNet, a neural architecture for the segmentation of 3D point clouds into surface primitive elements under topological supervision of its B-Rep graph structure. We also propose a point-to-BRep adjacency representation that allows for adapting conventional Linear Algebraic Representation of B-Rep graph structure to the point cloud domain. Thanks to this representation, SpelsNet learns from both spatial and topological domains to enable accurate and topologically consistent surface primitive element segmentation. In particular, SpelsNet is composed of two main components; (1) a supervised 3D spatial segmentation head that outputs B-Rep element types and memberships; (2) a graph-based head that leverages the proposed topological supervision. To enable the learning of SpelsNet with the proposed point-to-BRep adjacency supervision, we extend two existing CAD datasets with the required annotations, and conduct a thorough experimental validation on them. The obtained results showcase the efficacy of SpelsNet and its topological supervision compared to a set of baselines and state-of-the-art approaches.

3D reverse engineering is a long sought-after, yet not completely achieved goal in the Computer-Aided Design (CAD) industry. The objective is to recover the construction history of a CAD model. Starting from a Boundary Representation (B-Rep) of a CAD model, this paper proposes a new deep neural network, CADOps-Net, that jointly learns the CAD operation types and the decomposition into different CAD operation steps. This joint learning allows to divide a B-Rep into parts that were created by various types of CAD operations at the same construction step; therefore providing relevant information for further recovery of the design history. Furthermore, we propose the novel CC3D-Ops dataset that includes over 37k CAD models annotated with CAD operation type labels and step labels. Compared to existing datasets, the complexity and variety of CC3D-Ops models are closer to those used for industrial purposes. Our experiments, conducted on the proposed CC3D-Ops and the publicly available Fusion360 datasets, demonstrate the competitive performance of CADOps-Net with respect to state-of-the-art, and confirm the importance of the joint learning of CAD operation types and steps.