In this work, the Divergent Component of Motion (DCM) method is expanded to include angular coordinates for the first time. This work introduces the idea of spatial DCM, which adds an angular objective to the existing linear DCM theory. To incorporate the angular component into the framework, a discussion is provided on extending beyond the linear motion of the Linear Inverted Pendulum model (LIPM) towards the Single Rigid Body model (SRBM) for DCM. This work presents the angular DCM theory for a 1D rotation, simplifying the SRBM rotational dynamics to a flywheel to satisfy necessary linearity constraints. The 1D angular DCM is mathematically identical to the linear DCM and defined as an angle which is ahead of the current body rotation based on the angular velocity. This theory is combined into a 3D linear and 1D angular DCM framework, with discussion on the feasibility of simultaneously achieving both sets of objectives. A simulation in MATLAB and hardware results on the TORO humanoid are presented to validate the framework's performance.

Many state-of-the-art robotic applications utilize series elastic actuators (SEAs) with closed-loop force control to achieve complex tasks such as walking, lifting, and manipulation. Model-free PID control methods are more prone to instability due to nonlinearities in the SEA where cascaded model-based robust controllers can remove these effects to achieve stable force control. However, these model-based methods require detailed investigations to characterize the system accurately. Deep reinforcement learning (DRL) has proved to be an effective model-free method for continuous control tasks, where few works deal with hardware learning. This paper describes the training process of a DRL policy on the hardware of an SEA pendulum system for tracking force control trajectories from 0.05 - 0.35 Hz at 50 N amplitude using the Proximal Policy Optimization (PPO) algorithm. Safety mechanisms are developed and utilized for training the policy for over 21 hours (including overnight) without an operator present. The tracking performance is evaluated showing improvements of 25 N in mean absolute error when comparing the first 18 minutes of training to the full 21 hours for a 50 N amplitude, 0.1 Hz sinusoid desired force trajectory. Finally, the DRL policy exhibits better tracking and stability margins when compared to a model-free PID controller for a 50 N chirp force trajectory.