Traditional von Neumann architectures suffer from fundamental bottlenecks due to continuous data movement between memory and processing units, a challenge that worsens with technology scaling as electrical interconnect delays become more significant. These limitations impede the performance and energy efficiency required for modern data-intensive applications. In contrast, photonic in-memory computing presents a promising alternative by harnessing the advantages of light, enabling ultra-fast data propagation without length-dependent impedance, thereby significantly reducing computational latency and energy consumption. This work proposes a novel differential photonic static random access memory (pSRAM) bitcell that facilitates electro-optic data storage while enabling ultra-fast in-memory Boolean XOR computation. By employing cross-coupled microring resonators and differential photodiodes, the XOR-augmented pSRAM (X-pSRAM) bitcell achieves at least 10 GHz read, write, and compute operations entirely in the optical domain. Additionally, wavelength-division multiplexing (WDM) enables n-bit XOR computation in a single-shot operation, supporting massively parallel processing and enhanced computational efficiency. Validated on GlobalFoundries' 45SPCLO node, the XpSRAM consumed 13.2 fJ energy per bit for XOR computation, representing a significant advancement toward next-generation optical computing with applications in cryptography, hyperdimensional computing, and neural networks.

The rapid surge in data generated by Internet of Things (IoT), artificial intelligence (AI), and machine learning (ML) applications demands ultra-fast, scalable, and energy-efficient hardware, as traditional von Neumann architectures face significant latency and power challenges due to data transfer bottlenecks between memory and processing units. Furthermore, conventional electrical memory technologies are increasingly constrained by rising bitline and wordline capacitance, as well as the resistance of compact and long interconnects, as technology scales. In contrast, photonics-based in-memory computing systems offer substantial speed and energy improvements over traditional transistor-based systems, owing to their ultra-fast operating frequencies, low crosstalk, and high data bandwidth. Hence, we present a novel differential photonic SRAM (pSRAM) bitcell-augmented scalable mixed-signal multi-bit photonic tensor core, enabling high-speed, energy-efficient matrix multiplication operations using fabrication-friendly integrated photonic components. Additionally, we propose a novel 1-hot encoding electro-optic analog-to-digital converter (eoADC) architecture to convert the multiplication outputs into digital bitstreams, supporting processing in the electrical domain. Our designed photonic tensor core, utilizing GlobalFoundries’ monolithic 45SPCLO technology node, achieves computation speeds of 4.10 tera-operations per second (TOPS) and a power efficiency of 3.02 TOPS/W.

Recent advances in retinal neuroscience inspired the development of hardware and software systems that leverage evolutionarily derived retinal computations for real-world computer vision applications. In this work, we propose a novel, reconfigurable CMOS circuit designed specifically for Looming Detection (LD), a key retinal computation associated with detecting rapidly approaching objects and potential threats. We analyze the circuit's performance using real-world data from controlled laboratory environments and hardware-aware algorithmic simulations, demonstrating its accuracy in identifying potential collisions and avoiding false-positives from mundane object movements. Furthermore, we evaluate the CMOS hardware characteristics using GlobalFoundries' 22nm FD-SOI technology, exhibiting a 0.36 pJ energy consumption per looming spike for a unit kernel size of 5 × 5 pixels. This work contributes a foundational approach to adaptive hardware-software co-design by integrating advances in retinal neuroscience with modern CMOS technology to address real-time LD with in-sensor computations.

The desire to empower resource-limited edge devices with computer vision (CV) must overcome the high energy consumption of collecting and processing vast sensory data. To address the challenge, this work proposes an energy-efficient non-von-Neumann in-pixel processing solution for neuromorphic vision sensors employing emerging (X) magnetic domain wall magnetic tunnel junction (MDWMTJ) for the first time, in conjunction with CMOS-based neuromorphic pixels. Our hybrid CMOS+X approach performs in-situ massively parallel asynchronous analog convolution, exhibiting low power consumption and high accuracy across various CV applications by leveraging the non-volatility and programmability of the MDWMTJ. Moreover, our developed device-circuit-algorithm co-design framework captures device constraints (low tunnel-magnetoresistance, low dynamic range) and circuit constraints (non-linearity, process variation, area consideration) based on monte-carlo simulations and device parameters utilizing GF22nm FD-SOI technology. Our experimental results suggest we can achieve an average of 45.3% reduction in backend-processor energy, maintaining similar front-end energy compared to the state-of-the-art and high accuracy of 79.17% and 95.99% on the DVS-CIFAR10 and IBM DVS128-Gesture datasets, respectively.

The high volume of data transmission between the edge sensor and the cloud processor leads to energy and throughput bottlenecks for resource-constrained edge devices focused on computer vision. Hence, researchers are investigating different approaches (e.g., near-sensor processing, in-sensor processing, in-pixel processing) by executing computations closer to the sensor to reduce the transmission bandwidth. Specifically, in-pixel processing for neuromorphic vision sensors (e.g., dynamic vision sensors (DVS)) involves incorporating asynchronous multiply-accumulate (MAC) operations within the pixel array, resulting in improved energy efficiency. In a CMOS implementation, low overhead energy-efficient analog MAC accumulates charges on a passive capacitor; however, the capacitor’s limited charge retention time affects the algorithmic integration time choices, impacting the algorithmic accuracy, bandwidth, energy, and training efficiency. Consequently, this results in a design trade-off on the hardware aspect- creating a need for a low-leakage compute unit while maintaining the area and energy benefits. In this work, we present a holistic analysis of the hardware-algorithm codesign trade-off based on the limited integration time posed by the hardware and techniques to improve the leakage performance of the in-pixel analog MAC operations.

The massive amounts of data generated by camera sensors motivate data processing inside pixel arrays, i.e., at the extreme-edge. Several critical developments have fueled recent interest in the processing-in-pixel-in-memory paradigm for a wide range of visual machine intelligence tasks, including (1) advances in 3D integration technology to enable complex processing inside each pixel in a 3D integrated manner while maintaining pixel density, (2) analog processing circuit techniques for massively parallel low-energy in-pixel computations, and (3) algorithmic techniques to mitigate non-idealities associated with analog processing through hardware-aware training schemes. This article presents a comprehensive technology-circuit-algorithm landscape that connects technology capabilities, circuit design strategies, and algorithmic optimizations to power, performance, area, bandwidth reduction, and application-level accuracy metrics. We present our results using a comprehensive co-design framework incorporating hardware and algorithmic optimizations for various complex real-life visual intelligence tasks mapped onto our P2M paradigm.

The landscape of emerging applications has been continually widening, encompassing various data-intensive applications like artificial intelligence, machine learning, secure encryption, Internet-of-Things, etc. A sustainable approach toward creating dedicated hardware platforms that can cater to multiple applications often requires the underlying hardware to context-switch or support more than one context simultaneously. This paper presents a context-switching and dual-context memory based on the standard 8T SRAM bit-cell. Specifically, we exploit the availability of multi-VT transistors by selectively choosing the read-port transistors of the 8T SRAM cell to be either high-VT or low-VT. The 8T SRAM cell is thus augmented to store ROM data (represented as the VT of the transistors constituting the read-port) while simultaneously storing RAM data. Further, we propose specific sensing methodologies such that the memory array can support RAM-only or ROM-only mode (context-switching (CS) mode) or RAM and ROM mode simultaneously (dual-context (DC) mode). Extensive Monte-Carlo simulations have verified the robustness of our proposed ROM-augmented CS/DC memory on the Globalfoundries 22nm-FDX technology node.

Due to the high activation sparsity and use of accumulates (AC) instead of expensive multiply-and-accumulates (MAC), neuromorphic spiking neural networks (SNNs) have emerged as a promising low-power alternative to traditional DNNs for several computer vision (CV) applications. However, most existing SNNs require multiple time steps for acceptable inference accuracy, hindering real-time deployment and increasing spiking activity and, consequently, energy consumption. Recent works proposed direct encoding that directly feeds the analog pixel values in the first layer of the SNN in order to significantly reduce the number of time steps. Although the overhead for the first layer MACs with direct encoding is negligible for deep SNNs and the CV processing is efficient using SNNs, the data transfer between the image sensors and the downstream processing costs significant bandwidth and may dominate the total energy. To mitigate this concern, we propose an in-sensor computing hardware-software co-design framework for SNNs targeting image recognition tasks. Our approach reduces the bandwidth between sensing and processing by 12−96× and the resulting total energy by 2.32× compared to traditional CV processing, with a 3.8% reduction in accuracy on ImageNet.