This paper proposes a method to robustify model predictive path integral (MPPI) control by directly taking into account the effects of parameter uncertainty into the controller formulation. Leveraging the recent notion of closed-loop state sensitivity, the proposed MPPI can consider the state sensitivity against parameter mismatch as a part of the system state, and consequently exploit this additional information to address the challenge of model mismatch in sampling-based model predictive control. Using an obstacle avoidance scenario, we demonstrate the use of our approach to control an aerial robot. We present an embedded implementation of our method, utilizing parallelization of computations on a GPU. Finally, we show the increased robustness of our approach over a standard MPPI controller through hardware-in-the-loop simulations and validate its embedded real-time properties.

We present a fully autonomous self-recharging drone system capable of long-duration sustained operations near powerlines. The drone is equipped with a robust onboard perception and navigation system that enables it to locate powerlines and approach them for landing. A passively actuated gripping mechanism grasps the powerline cable during landing after which a control circuit regulates the magnetic field inside a split-core current transformer to provide sufficient holding force as well as battery recharging.The system is evaluated in an active outdoor three-phase powerline environment. We demonstrate multiple contiguous hours of fully autonomous uninterrupted drone operations composed of several cycles of flying, landing, recharging, and takeoff, validating the capability of extended, essentially unlimited, operational endurance.

Autonomously recharging UAVs from existing infrastructure has enormous potential for various applications, such as infrastructure inspection, surveillance, and search and rescue. While it is an active area of research, most related work focuses on alternating current (AC) infrastructure while very little work has been done on investigating the potential of recharging UAVs from direct current (DC) infrastructure. This work proposes a UAV system designed to autonomously recharge from existing DC infrastructure. Two onboard powerline grippers and a motorized cable drum enable the UAV to perform a two-stage landing on railway DC lines where a wire is connected between them through the UAV for recharging. Light-weight electronics designed to be carried by the UAV are developed to harvest energy from up to 3kV DC railway lines. The recharge mission is autonomously executed using fully onboard and real-time perception and trajectory planning and tracking algorithms. The potential of the system is shown in lab setting validation, with hardware-in-the-loop simulation, and partly in a real overhead powerline environment, verifying the functionality of the sub-components.