This study presents a comprehensive experimental analysis of Twisted String Actuators (TSA), focused on enhancing contraction modelling accuracy and establishing a baseline for TSA tension and impedance control efficacy. A novel TSA string radius function is introduced, computing effective radii for multi-strand bundles based on axial actuator tension. The proposed model was validated in physical experiments, resulting in a reduction of maximal errors between measured and simulated actuator contraction trajectories from up to 60 % in established models to around 10% in our work. Additionally, the tension-dependent radius modification effectively reduced errors between the estimated and the measured bundle tension by an order of magnitude, marking an essential step towards TSA control independent of bundle tension measurements. TSA tension control was assessed based on four metrics: accu-racy, precision, impact stability, and bandwidth, following ISO 9283:1998 standards. The quality of tension control was found to be dependent on bundle tension, twisting angle and strand quantity, whereas impact stability was maintained in all config-urations. Joint impedance control with TSA was evaluated for perturbation stability and position control bandwidth, where the latter was enhanced with increasing joint stiffness. The presented analysis informs designers about the capabilities of TSAs in different configurations, and their respective suitability for desired applications.

Markerless motion capture devices such as the Leap Motion Controller (LMC) have been extensively used for tracking hand, wrist, and forearm positions as an alternative to Marker-based Motion Capture (MMC). However, previous studies have highlighted the subpar performance of LMC in reliably recording hand kinematics. In this study, we employ four LMC devices to optimize their collective tracking volume, aiming to enhance the accuracy and precision of hand kinematics. Through Monte Carlo simulation, we determine an optimized layout for the four LMC devices and subsequently conduct reliability and validity experiments encompassing 1560 trials across ten subjects. The combined tracking volume is validated against an MMC system, particularly for kinematic movements involving wrist, index, and thumb flexion. Utilizing calculation resources in one computer, our result of the optimized configuration has a better visibility rate with a value of 0.05 ± 0.55 compared to the initial configuration with -0.07 ± 0.40. Multiple Leap Motion Controllers (LMCs) have proven to increase the interaction space of capture volume but are still unable to give agreeable measurements from dynamic movement.

This study addresses the critical need for diverse and comprehensive data focused on human arm joint torques while performing activities of daily living (ADL). Previous studies have often overlooked the influence of objects on joint torques during ADL, resulting in limited datasets for analysis. To address this gap, we propose an Object Augmentation Algorithm (OAA) capable of augmenting existing marker-based databases with virtual object motions and object-induced joint torque estimations. The OAA consists of five phases: (1) computing hand coordinate systems from optical markers, (2) characterising object movements with virtual markers, (3) calculating object motions through inverse kinematics (IK), (4) determining the wrench necessary for prescribed object motion using inverse dynamics (ID), and (5) computing joint torques resulting from object manipulation. The algorithm’s accuracy is validated through trajectory tracking and torque analysis on a 5+4 degree of freedom (DoF) robotic hand-arm system, manipulating three unique objects. The results show that the OAA can accurately and precisely estimate 6 DoF object motion and object-induced joint torques. Correlations between computed and measured quantities were > 0.99 for object trajectories and > 0.93 for joint torques. The OAA was further shown to be robust to variations in the number and placement of input markers, which are expected between databases. Differences between repeated experiments were minor but significant (p < 0.05). The algorithm expands the scope of available data and facilitates more comprehensive analyses of human-object interaction dynamics.

Prosthetic limb abandonment remains an unsolved challenge as amputees consistently reject their devices. Current prosthetic designs often fail to balance human-like performance with acceptable device weight, highlighting the need for optimised designs tailored to modern tasks. This study aims to provide a comprehensive dataset of joint kinematics and kinetics essential for performing activities of daily living (ADL), thereby informing the design of more functional and user-friendly prosthetic devices. Functionally required Ranges of Motion (ROM), velocities, and torques for the Glenohumeral (rotation), elbow, Radioulnar, and wrist joints were computed using motion capture data from 12 subjects performing 24 ADLs. Our approach included the computation of joint torques for varying mass and inertia properties of the upper limb, while torques induced by the manipulation of experimental objects were considered by their interaction wrench with the subject’s hand. Joint torques pertaining to individual ADL scaled linearly with limb and object mass and mass distribution, permitting their generalisation to not explicitly simulated limb and object dynamics with linear regressors (LRM), exhibiting coefficients of determination R = 0.99 ± 0.01. Exemplifying an application of data-driven prosthesis design, we optimise wrist axes orientations for two serial and two differential joint configurations. Optimised axes reduced peak power requirements, compared to anatomical configurations, by exploiting high torque correlations (r = −0.84, p < 0.05) between Ulnar deviation and wrist flexion/extension joints. This study offers critical insights into the functional requirements of upper limb prostheses, providing a valuable foundation for data-driven prosthetic design that addresses key user concerns and enhances device adoption.

Central Pattern generators (CPG) are a biologically inspired, decentralized control architecture that enables model-free, but yet adaptively stable and computational lightweight locomotion capabilities on complex robots. Nevertheless, no unified design guidelines for closed-loop CPG controllers are available in the literature. Therefore, we propose a task-distributed, end-to-end trainable, closed-loop CPG control policy by generalizing and extending Tegotae control. The Tegotae approach modulates CPG activity by quantifying the discrepancy between internal belief states and environmental reactions. Spontaneous and adaptive gait formation towards situationally efficient locomotion patterns are intrinsic properties of Tegotae control. The Tegotae control policy is trained and benchmarked in simulation on a 1D hopping robot. We found that our approach can learn efficient and adaptive locomotion on minimal feedback information, while out-performing unstructured, classic reinforcement learning policies of equal complexity. To the best of our knowledge, this is the first study to fully generalize the Tegotae approach and construct unimpeded, end-to-end trainable Tegotae control policies.