Analog Compute-in-Memory (CIM), leveraging non-volatile memristive devices to perform in-place computations in the analog domain, holds great potential to efficiently accelerate vector-matrix multiplications (VMM) and realize AI (Artificial Intelligence) at the edge. However, the data converters in such architectures often trade-off accuracy for high energy and area overheads, practically limiting the benefits of CIM. In this work, we present SABCIM, an array-periphery co-design approach for CIM that enables accurate computation as well as digitization of analog VMM outputs with high energy efficiency and competitive area overhead. By leveraging complementary input activations and data storage, each crossbar column generates differential analog output corresponding to the vector-vector multiplication (VVM) result, while inherently addressing underlying non-idealities. This is digitized using a compact, dual-ramp voltage-to-time converter (VTC)-based analog-to-digital converter (ADC). Benchmark results indicate that our work achieves up to $19.6 \times$ higher energy efficiency compared to state-of-the-art (SOTA), while maintaining comparable accuracies.

The Computing-In-Memory (CIM) paradigm offers a promising solution to the memory-wall bottleneck that limits conventional Von Neumann architectures. By performing data processing at the same physical location where the data are stored, CIM-based architectures minimize costly data movement and drastically improve energy efficiency. When implemented with Ferroelectric Field Effect Transistors (FeFETs), additional advantages from the non-volatility, fast switching, and low operating voltage of FeFETs are added. However, the widespread adoption of FeFETs is limited by their poor endurance, which is overcome by a Back End of the Line (BEoL) integration of FeFET-2, where a ferroelectric capacitor (FeCAP) is wired to the gate of a CMOS transistor providing high endurance compatible with low-power edge applications. These properties enable dense, low-power, and high-speed matrix operations essential for AI workloads. As a result, FeFET-2-based CIM accelerators offer a promising solution for energy-efficient, high-performance AI at the edge. The Ferro4EdgeAI project aims to develop an ultra low-power, scalable edge accelerator for AI, targeting a significant gain in energy efficiency with respect to state-of-the-art AI hardware accelerators. To attain this, our project focuses on innovation all along the value chain from materials, physic concepts, device architecture, integration technologies, and accelerators in a holistic design space exploration approach.

Advancements in Artificial Intelligence (AI) and Internet-of-Things (IoT) have increased demand for edge AI, but deployment on traditional AI accelerators, like GPUs and TPUs, using von Neumann architecture, suffer from inefficiencies due to separate memory and compute units. Computation-in-Memory (CIM), utilizing non-volatile memristor devices to leverage analog computing principles and perform in-place computations, holds great potential in improving computational efficiency by eliminating frequent data movement. However, standard implementation of CIM faces several challenges, primarily high power consumption and subsequently induced nonlinearity, debating its viability for edge devices. In this paper, we propose C3CIM, a novel memristor-based CIM micro-architecture, featuring a new bit-cell and array design, targeting efficient implementation of Neural Networks (NN). Our architecture uses a constant current source to perform Multiply-and-Accumulate (MAC) operations with a very low computation current (10 to 100 nA), thereby significantly enhancing power efficiency. We adapted C3CIM for Spiking Neural Networks (SNN) and developed a prototype using TSMC 40nm CMOS node for on-silicon validation. Furthermore, our micro-architecture was benchmarked using two SNN models based on N-MNIST and IBM-Gesture datasets, for comparison against current state-of-the-art (SOTA). Results show up to 35x reduction in power along with 6.7x saving in energy compared to SOTA, demonstrating promising potential of this work for edge AI applications.

Artificial Intelligence (AI) supported by Deep Artificial Neural Networks (ANNs) is booming and already used in many applications, with impressive results, and we are still its infancy. For many sensing applications it would be advantageous if we could move AI from cloud to Edge. However this requires huge improvements in energy-efficiency. The CONVOLVE project (convolve.eu) aims at enabling smart edge devices through a concerted effort at all layers of the design stack. This ranges from using much more efficient models and mappings, like exploiting Spiking Neural Networks (SNNs), to new processing architectures, like compute-in-memory (CIM), use of approximation, and using new device technology, like memristors. However these latter changes make HW more susceptible to noise and other disturbances. Online continuous learning (i.e. adapting weights) may alleviate these problems. This paper shows several CONVOLVE developments in the crucial areas of CIM architectures, SNN accelerators and online learning.

Binary Neural Networks (BNNs) have demonstrated significant advantages in reducing computation and memory costs, all while maintaining acceptable accuracy on various image detection tasks. Thus, BNNs have the potential to support practical cognitive tasks on resource-constrained platforms, such as edge computing devices. To realize this, SRAM-based digital Computation-in-Memory (CIM) has gained growing attention as it overcomes the analog CIM architecture bottlenecks such as limited computing accuracy due to process variation, non-linearity, power and area-hungry Analog-to-Digital Converters (ADCs), etc. However, digital CIM architectures are highly dominated by power-hungry adder-trees, which can nullify the benefits of SRAM-based digital CIM. To address this issue, this paper proposes an adder free SRAM-based digital CIM, AFSRAM-CIM, for BNN acceleration. The proposed CIM architecture utilizes a multi-functional 10-T SRAM cell-based crossbar array and a new energy-efficient approach to perform the popcount operation. Simulation results using the MNIST dataset show that the proposed architecture maintains the state-of-the-art inference accuracy of 99.21% with only 11.86 fJ energy per operation. Moreover, AFSRAM-CIM achieves over$3\times$energy and$\approx 17\times$area savings when compared to the conventional digital CIM approaches.