Accurate leaf wetness detection is essential to understanding plant health and growth conditions. The mmWave radar, with its sensitivity to subtle changes, is well-suited for leaf wetness detection. Existing mmWave-based approaches utilize the Synthetic Aperture Radar (SAR) algorithm to generate image-like inputs and rely on multi-modality fusion with an RGB camera to classify leaf wetness. However, the lack of understanding of SAR-based mmWave imaging limits its accuracy in various environments. This paper presents Proteus, a novel way of understanding mmWave SAR imaging. We design a noise reduction algorithm to reduce speckle noise and improve image clarity for SAR-based mmWave imaging. Then, we incorporate phase angle data to enrich SAR texture information to capture high-resolution surface details, increasing informative features for precise wetness assessment in complex plant structures. Additionally, we introduce a cross-modality Teacher-Student network, using an RGB-based teacher model to guide the mmWave SAR-based student model for feature extraction. This network transfers the explicit knowledge in the RGB image domain to the mmWave image domain. We use commercial-off-the-shelf mmWave radar to prototype Proteus. The evaluation results show that Proteus achieves up to 96.3% accuracy across varied environmental scenarios, outperforming state-of-the-art methods.

Leaf Wetness Duration (LWD), the time that water remains on leaf surfaces, is crucial in the development of plant diseases. Existing LWD detection lacks standardized measurement techniques, and variations across different plant characteristics limit its effectiveness. Prior research proposes diverse approaches, but they fail to measure real natural leaves directly and lack resilience in various environmental conditions. This reduces the precision and robustness, revealing a notable practical application and effectiveness gap in real-world agricultural settings. This paper presents Hydra, an innovative approach that integrates millimeter-wave (mm-Wave) radar with camera technology to detect leaf wetness by determining if there is water on the leaf. We can measure the time to determine the LWD based on this detection. Firstly, we design a Convolutional Neural Network (CNN) to selectively fuse multiple mm-Wave depth images with an RGB image to generate multiple feature images. Then, we develop a transformer-based encoder to capture the inherent connection among the multiple feature images to generate a feature map, which is further fed to a classifier for detection. Moreover, we augment the dataset during training to generalize our model. Implemented using a frequency-modulated continuous-wave (FMCW) radar within the 76 to 81 GHz band, Hydra's performance is meticulously evaluated on plants, demonstrating the potential to classify leaf wetness with up to 96% accuracy across varying scenarios. Deploying Hydra in the farm, including rainy, dawn, or poorly light nights, it still achieves an accuracy rate of around 90%.

Rural Internet of Things (IoT) systems connect sensors and actuators in remote areas, serving crucial roles in agriculture and environmental monitoring. Given the absence of networking infrastructure for backhaul in these regions, satellite IoT techniques offer a cost-effective solution for connectivity. However, current satellite IoT architectures often struggle to deliver high performance due to temporal and spatial link challenges. This paper presents SateRIoT, a new network architecture with temporal link estimation and spatial link sharing that fully exploits the capability of space low-cost low-earth-orbit (LEO) IoT satellites and ground low-power wide area (LPWA) IoT techniques in rural areas. First, we introduce a bursty link model that predicts the number of transmittable packets within a transmission window, reducing energy waste from failed uplink transmissions. Moreover, we enhance the model by selecting informative features and optimizing the window length. Additionally, we develop a multi-hop flooding protocol that enables gateways to buffer and share data packets across the network while incorporating a priority data queue to avoid duplicate transmissions. We implement SateRIoT with commercial-off-the-shelf (COTS) IoT satellite and LoRa radios, then evaluate its performance based on real deployment and real-world collected traces. The results show that SateRIoT can consume 3.3X less energy consumption for an individual gateway. Moreover, SateRIoT offers up to a 5.6X reduction in latency for a single packet and a 1.9X enhancement in throughput.

Soil monitoring plays an essential role in agricultural systems. Rather than deploying sensors' antennas above the ground, burying them in the soil is an attractive way to retain a non-intrusive aboveground space. Low Power Wide-Area Network (LPWAN) has shown its long-distance and low-power features for aboveground Internet-of-Things (IoT) communication, presenting a potential of extending to underground cross-soil communication over a wide area, which however has not been investigated before. The variation of soil conditions brings significant signal polarization misalignment, degrading communication reliability. In this paper, we propose Demeter, a low-cost low-power programmable antenna design to keep reliable cross-soil communication automatically. First, we propose a hardware architecture to enable polarization adjustment on commercial-off-the-shelf (COTS) single-RF-chain LoRa radio. Moreover, we develop a low-power programmable circuit to obtain polarization adjustment. We further design an energy-efficient heuristic calibration algorithm and an adaptive calibration scheduling method to keep signal polarization alignment automatically. We implement Demeter with a customized PCB circuit and COTS devices. Then, we evaluate its performance in various soil types and environmental conditions. The results show that Demeter can achieve up to 11.6 dB SNR gain indoors and 9.94 dB outdoors, 4× horizontal communication distance, at least 20 cm deeper underground deployment, and up to 82% energy consumption reduction per day compared with the standard LoRa.

Low Power Wide-Area Network (LPWAN) has shown its long-distance and low-power features for aboveground Internet-of-Things (IoT) communication, presenting a potential to extend to underground cross-soil communication over a wide area, which has not been investigated before. The variation of soil conditions brings significant signal polarization misalignment, degrading communication reliability. We propose Demeter, a low-cost, low-power programmable antenna design to keep reliable cross-soil communication automatically. First, we propose a hardware architecture to enable polarization adjustment on commercial-off-the-shelf (COTS) single-RF-chain LoRa radio. Moreover, we develop a low-power programmable circuit to adjust polarization. We further design an energy-efficient heuristic calibration algorithm to keep signal polarization alignment automatically. We demonstrate Demeter in indoor environments. The antenna is buried in a plastic container filled with gardening soil to simulate the node underground. Meanwhile, we use the COTS LoRa gateway as a receiver to show the RSSI and SNR variations.

Leaf wetness detection is one of the key technologies for preventing plant diseases in agriculture. In this poster, we propose mmLeaf, leveraging a commercial off-the-shelf millimeter-wave (mmWave) radar to detect actual leaf wetness in diverse environments and lighting conditions. mmLeaf captures mmWave signals reflected by monitored leaves with a two-dimensional (2D) scanning system. Then, we use a multiple-input multiple-output (MIMO) array and synthetic aperture radar (SAR) to reconstruct the signal distribution of different planes of the leaves. A deep learning model takes the fused signal distribution as inputs to classify the leaf wetness. We implement mmLeaf using a frequency-modulated continuous-wave (FMCW) radar and evaluate its performance with a potted plant indoors. By exploring the use of mmWave signals, mmLeaf delivers an end-to-end detection framework that achieves up to 90% accuracy in classifying leaf wetness under different distances.