The integration of the Social Internet of Things (SIoT) with Wireless Sensor Networks (WSNs) significantly enhances the efficiency, scalability, and intelligence of distributed sensing systems. However, these networks often encounter severe resource constraints, limiting the control and management traffic that can be introduced. WSNs, typically composed of battery-powered edge sensor nodes with limited computational capabilities, memory, and communication bandwidth, face challenges in optimizing performance. In this work, we address the multi-objective optimization problem within the context of resource-constrained SIoT, aiming to reduce the energy consumption of edge nodes while simultaneously enhancing the quality of the received data based on channel conditions. We propose a Pareto Optimization framework to jointly optimize the compression factor and coding rate in a WSN scenario utilizing LoRa technology for communication. This framework explores the trade-offs between energy consumption and data reconstruction quality, leveraging Compressive Sensing (CS) for efficient data compression to alleviate the transmission load on edge nodes. Furthermore, we present a distributed optimization solution to minimize energy consumption while maximizing data quality, thereby reducing signaling and control overhead. This study contributes to the development of energy-efficient, scalable, and sustainable SIoT systems by providing a foundation for optimizing data transmission in LoRa networks.

Low-Power Wide-Area Network (LPWAN) technologies such as LoRa are key enablers of large-scale IoT monitoring systems, where long communication range and low energy consumption are essential. These advantages, however, come at the cost of strict throughput limitations, which significantly shape IoT system design. Compressive Sensing (CS) can mitigate this constraint by reducing transmitted data volumes, effectively trading communication load for additional processing at the sensing node and receiver. From an IoT perspective, this shift impacts node lifetime, hardware requirements, and overall network scalability. In this paper, we propose a data-driven optimization framework for LoRa-based IoT sensing systems employing CS. The approach jointly analyzes reconstruction quality and energy consumption through surrogate regression models that capture the interaction between physical-layer parameters and compression levels. This enables efficient multi-objective optimization via Pareto-front analysis and utopia-based selection. Results show that CS does not always dominate the quality-energy trade-off and that unified and stratified surrogate strategies identify closely aligned optimal operating points. Overall, the framework provides a practical and interpretable tool for the design of energy-efficient IoT sensing deployments.

The healthcare sector is experiencing a profound transformation, fueled by the rapid evolution of sixth-generation (6G) cellular networks and Internet of Things (IoT) technologies. At the heart of this shift lies the concept of medical digital twins (MDTs), which serve as dynamic virtual representations of physical systems or biological processes. MDTs offer a secure environment to simulate and evaluate therapeutic strategies, leading to reduced costs and more informed clinical decision-making. They also enable real-time support and in-depth data analysis, setting new standards for patient care. Nonetheless, realizing the full capabilities of MDTs remains challenging due to the inherent complexity of human life cycles. Crucial aspects include selecting appropriate data sources and defining robust communication protocols between the physical and digital realms. In particular, integrating wearable technologies with edge computing and WiFi-based Channel State Information (CSI) can significantly enhance health monitoring and activity recognition for elderly individuals within indoor settings. The synergy of IoT advancements and 6G networks paves the way for improved data exchange and continuous synchronization between digital and physical counterparts. This paper, part of the HIPPOCRATES project, presents an IoT-driven architecture for MDTs that incorporates wearable sensors and CSI data to strengthen health monitoring and early intervention strategies, with a focus on elderly care.

The integration of Social Internet of Things (SIoT) paradigms with Wireless Sensor Networks (WSNs) offers significant improvements in the efficiency, scalability, and intelligence of distributed sensing systems. However, these networks are often subject to severe resource constraints, particularly at the edge, where sensor nodes are typically battery-powered and limited in computational power, memory, and communication bandwidth. Consequently, the introduction of control and management traffic must be carefully limited to avoid compromising network performance. In this work, we tackle the problem of multi-objective optimization in resource-constrained SIoT environments. Specifically, we aim to reduce the energy consumption of edge sensor nodes while improving the quality of the received data, taking into account the underlying channel conditions. To this end, we propose a distributed optimization strategy that minimizes energy consumption and maximizes data quality, while implicitly reducing the overhead associated with signaling and control messages. This framework explores the trade-offs between energy efficiency and data reconstruction accuracy, leveraging both Compressive Sensing (CS) to effectively reduce the transmission burden, and channel coding techniques to enhance data protection in LoRa-based WSNs.

Enabled by the integration of AI and the Internet of Medical Things (IoMT), smart and remote monitoring systems are poised to play a pivotal role in the future of healthcare. Specifically, monitoring respiration is a critical component of this evolution, offering a straightforward yet effective method for assessing an individual's health status. In this paper, we introduce an innovative contactless approach to respiration monitoring that leverages Channel State Information (CSI) from Wi-Fi channels. By analyzing variations in the amplitude and phase of CSI data, we infer human respiration patterns. To validate our method, we conducted experiments with multiple subjects in indoor environments, assessing the system's capability to track the respiration cycle and determine breathing frequency. We also compared the performance of various AI algorithms in identifying accurate breath rates. Our findings indicate that the CSI-based system is a promising solution for respiration monitoring, achieving an average accuracy of approximately 84 % in estimating breathing frequency, thus paving the way for future studies to enhance the robustness of the proposed approach.

The Internet of Things (IoT) has garnered significant attention in recent years, with the integration of AI solutions and wireless sensing technologies enabling innovative approaches to context awareness and user location. Additionally, Channel State Information (CSI) from WiFi channels is emerging as a key component in next-generation wireless systems. In this work, we conduct a comprehensive analysis of the sensing capabilities of state-of-the-art CSI tools, namely the Intel 5300 and the ESP32 CSI tools, through extensive experimental tests in a dedicated testbed. The results offer valuable insights into CSI-based techniques, demonstrating their strong potential for activity detection and context aware applications.

This paper presents the design, development, and implementation of an Industrial IoT (IIoT) node aimed at monitoring vibrations on various types of structures, such as bridges, lightning rods, and large industrial machinery. The IoT node leverages a ESP32 microcontroller, an Inertial Measurement Unit (IMU), and radio communication technology for data transmission. The proposed solution is capable of gathering and transmitting real-time data from accelerometers, gyroscopes, and magnetometers via a LoRa interface. In this work we carry out a fine system calibration procedure, to assess the actual features of the IIoT node and provide a thorough experimental analysis of the performance of LoRa technology in complex urban environments performing extensive field tests. This work lays the foundation for the utilization of the IIoT node equipped with LoRa technology in both urban environments and industrial IoT frameworks, highlighting its adaptability and potential for wide-scale applications in these settings.

The convergence of Symbiotic IoT, AI foundational models, and 6G is ushering in a new era of intelligent connectivity, where networks, devices, and algorithms operate in close coordination to enable real-time, adaptive, and efficient systems. In the context of Structural Health Monitoring (SHM), this integrated vision provides a powerful framework to tackle challenges such as limited resources, harsh environments, and the need for timely, high-fidelity data. By enabling intelligent, collaborative processing across edge and network layers, it supports efficient data compression, transmission, and decision-making—ensuring robust and adaptive monitoring even in complex structural settings. In this work, we investigate the use of AI for data compression in an IoT-based SHM scenario. Specifically, we evaluate and compare the performance of four different Convolutional Autoencoders (CAEs) in compressing and reconstructing inertial signals collected from various structural systems, aiming to enable adaptive and context-aware processing directly at the edge. By testing across heterogeneous sources, we assess the generalizability and robustness of each CAE model, providing insights into the potential of deep learning-based compression techniques for SHM applications.

Contactless patient monitoring is one of the most trending topics in eHealth, due to the utmost importance of non-invasive tele-enabled biomedical systems in next-generation healthcare. In this connection, this work investigates Human Activity Recognition (HAR) using commodity 5GHz WiFi devices, exploiting Channel State Information (CSI) to distinguish among a set of actions performed by different people. The position and movements of the human body affect wireless signal reflections and, consequently, CSI. Data collected from wireless packets are organized into the CSI matrix, which describes the status of the link at each time instant. In this work we employ amplitude and phase information, related to the variations in CSI values, to classify human activities leveraging simple machine learning techniques. Different radio link modes are also compared to evaluate their impact on the classification performance. Experimental results show that CSI data is capable of providing very accurate results in classifying activities performed by different people, especially when considering phase-related information in a multiple-input-multiple-output (MIMO) configuration, thus making CSI-based HAR a promising solution for contactless patient monitoring.

Structural Health Monitoring (SHM) is a process aimed at studying variations in the expected behavior of a structure in order to locate damage, material deterioration and other abnormalities. To this aim, SHM is usually performed continuously, thus generating large amounts of data, often by employing wired, expensive and proprietary systems. Introducing low-cost, low-energy consumption and low-rate IoT devices allows for cheaper and easier installations also in scenarios where computation and transmission resources are limited. Since many structural signals (e.g., vibrations) are sparse in the frequency domain, it is possible to apply well-known Compressive Sensing (CS) techniques to limit the amount of information to be transmitted. CS allows recovering a vector using a reduced amount of entries, thus being able to perform sub-Nyquist sampling. This paper shows the results obtained by applying CS to inertial signals coming from wireless IoT devices, developed as laboratory prototypes, applied to real structures (specifically, a bridge). Such findings are further expanded by discussing the efficiency of CS with respect to the number of used samples and its feasibility for IoT applications, from the transmission burden and energy consumption standpoints.

Compressive Sensing (CS) is a sampling technique which, provided the sparsity of the arrival domain and specific properties of the reconstruction matrix, allows rebuilding a vector starting from a significantly small subset of measures. This paves the way to a plethora of applications, ranging from specialized frameworks, such as medical imaging, to more general purposes, such as data compression. Among these, Structural Health Monitoring (SHM) is a primary and current topic, focused on analyzing structures to determine their residual lifespan and their health conditions (material degradation, damage localization, disaster prevention, etc.), In this regard, CS is able to provide accurate results, at the same time limiting the amount of data needed to propagate information between different end-points. Indeed, SHM usually deals with continuous flows of information originating from heterogeneous sensors and locations, often characterized by diverse computational power and signal coverage. In this paper we apply CS to signals coming from two different structures, i.e., a laboratory model and a bridge. Results show that CS is a viable way of reconstructing the considered signals by exploiting a subset of samples while still maintaining a high degree of precision, achieving an average normalized RMSE of 0.12.

Compressive Sensing (CS) is a sampling technique that challenges the traditional sampling scheme introduced by the Whittaker-Shannon theorem. Under certain conditions, a signal can be sampled at rates lower than the Nyquist rate, introducing a different kind of approach to signal handling, both in the acquisition and in the reconstruction phases. CS relies on the property of sparsity, the idea that a signal possesses an amount of information which is smaller than the amount of data required to store it. This paper employs the CS approach to inertial signals sensed by innovative IoT devices by showing applications of real-world infrastructure monitoring. Numerical results show that our approach is able to efficiently estimate the infrastructures modal frequencies with an innovative inertial IoT prototype by achieving a compression level around 20 times below the Nyquist rate.