End-to-end open-source electronic design automation enables a collaborative approach to chip design conducive to supply chain diversification and zero-trust step-by-step design verification. However, existing end-to-end OSEDA flows have mostly been demonstrated on small designs and have not yet enabled large, industry-grade chips such as Linux-capable systems-on-chip (SoCs). This work presents Basilisk, the largest end-to-end open-source SoC to date. Basilisk’s 34mm2, 2.7MGE design features a 64-bit Linuxcapable RISC-V core, a lightweight 124MB/s DRAM controller, and extensive IO, including a USB 1.1 host, a video output, and a fully digital 62Mb/s chip-to-chip (C2C) link. We implement Basilisk in IHP’s open 130nm BiCMOS technology, significantly improving on the state-of-the-art (SoA) OSEDA flow. Our enhancements of the Yosys-based synthesis flow improve design timing and area by 2.3×and 1.6×, respectively, while consuming significantly less system resources. By tuning OpenROAD place and route (P&R) to our design and technology, we decrease the die size by 12%. The fabricated Basilisk chip reaches 62MHz at its nominal 1.2V core voltage and up to 102MHz at 1.64V. It achieves a peak energy efficiency of 18.9DPMFLOP/s/W at 0.88V.

A key challenge for ultra-low-power (ULP) devices is handling peripheral linking, where the main central processing unit (CPU) periodically mediates the interaction among multiple peripherals following wake-up events. Current solutions address this problem by either integrating event interconnects that route single-wire event lines among peripherals or by general-purpose I/O processors, with a strong trade-off between the latency, efficiency of the former, and the flexibility of the latter. In this paper, we present an open-source, peripheral-agnostic, lightweight, and flexible Peripheral Event Linking System (PELS) that combines dedicated event routing with a tiny I/O processor. With the proposed approach, the power consumption of a linking event is reduced by 2.5 times compared to a baseline relying on the main core for the event-linking process, at a low area of just 7 kGE in its minimal configuration, when integrated into a ULP RISC-VIoT processor.