Large Language Models (LLMs) with 70 billion or more parameters are increasingly being deployed in cloud-based Model-as-a-Service (MaaS) scenarios. To meet the demands of such deployments, MaaS providers require batched LLM decoding systems that can deliver high System Throughput (STP) while minimizing Total Cost of Ownership (TCO). However, existing FPGA-based solutions predominantly focus on small-batch or single-batch inference, which fails to meet the computational requirements of batched LLM decoding, resulting in performance gaps of up to 7.96 \(\times\) . Moreover, the low utilization of multi-head attention operations in batched decoding scenarios, e.g., only 3.72% on A100 GPUs, further constrains throughput and inflates TCO. To address these challenges, this article introduces CD-LLM , a heterogeneous multi-FPGA system designed for efficient batched decoding of LLMs with 70B+ parameters, built upon a C ompute- D edicated architecture. First, we propose a memory-aligned mixed-precision quantization engine to reduce workload. By employing importance-aware quantization, we compress Llama-3.1-70B to an effective 3.45-bit representation and achieve 72.33% bandwidth utilization through memory-aligned data packing. Second, we present a compute-dedicated FPGA architecture that maximizes peak performance by leveraging FPGA-specific resources such as DSPs, BRAMs, and LUTs. The compute-dedicated architecture enables CD-LLM to reach a peak performance of 59.90 TOPS at 600 MHz on U250 FPGA. At last, we introduce a heterogeneous master-slave multi-FPGA system to achieve higher utilization. By pipelining attention and linear layer computations across master and slave FPGAs, CD-LLM achieves utilization rates of 83.08% for linear layers and 68.30% for attention layers. CD-LLM is designed with a heterogeneous multi-FPGA architecture, with an HBM-enabled FPGA as the master accelerator and eight DDR-based FPGAs as slave accelerators. When deployed for inference on the Llama-3.1-70B model with a batch size of 256, CD-LLM achieves a throughput of 2,721.79 tokens/s. This represents a 6.11 \(\times\) improvement in STP and a 4.71 \(\times\) reduction in TCO compared to an eight-card RTX3090 GPU system. Furthermore, CD-LLM substantially outperforms the state-of-the-art eight-card FPGA accelerator FlightLLM, delivering 16.15 \(\times\) higher STP and 14.56 \(\times\) lower TCO.

Transformer-based video generation models have demonstrated significant potential in content creation. However, the current state-of-the-art model employing “ 3 D full attention” encounters substantial computation and storage challenges. For instance, the attention map size for $\operatorname{Cog}$ VideoX-5B requires 56.50 GB, and generating a video of 49 frames takes approximately 1 minute on an NVIDIA A100 GPU under FP16. Although model quantization has proven effective in reducing both memory and computational costs, applying it to video generation models still faces challenges in preserving algorithm performance while ensuring efficient hardware processing. To address these issues, we introduce PARO, a video generation accelerator with patternaware reorder-based attention quantization. PARO investigates the diverse attention patterns of 3D full attention and proposes a novel reorder technique to unify these patterns into a unified “block diagonal” structure. Block-wise mixed precision quantization is further applied to achieve lossless compression under an average bitwidth of 4.80 bits. In terms of hardware, to overcome the limitation of existing mixed-precision computing units could not fully utilize the attention map bitwidth to accelerate $Q K$ multiplication, PARO designs an output-bitwidth aware mixedprecision processing element (PE) array through hardwaresoftware co-design. This approach ensures that the mixedprecision characteristics are fully utilized to enhance hardware efficiency in the bottleneck attention computation. Experiments demonstrate that PARO delivers up to $2.71 \times$ improvement in end-to-end performance compared to an NVIDIA A100 GPU and achieves up to $6.38 \sim 7.05 \times$ speedup over state-of-the-art ASICbased accelerators on the CogVideoX-2B and 5B models.

For large language model (LLM) acceleration, FPGAs face two challenges: insufficient peak computing performance and unacceptable accuracy loss of model compression. This paper proposes FMC-LLM to enable FPGAs for efficient batched decoding of 70B+ LLMs.

Transformer-based Large Language Models (LLMs) have made a significant impact on various domains. However, LLMs' efficiency suffers from both heavy computation and memory overheads. Compression techniques like sparsification and quantization are commonly used to mitigate the gap between LLM's computation/memory overheads and hardware capacity. However, existing GPU and transformer-based accelerators cannot efficiently process compressed LLMs, due to the following unresolved challenges: low computational efficiency, underutilized memory bandwidth, and large compilation overheads. This paper proposes FlightLLM, enabling efficient LLMs inference with a complete mapping flow on FPGAs. In FlightLLM, we highlight an innovative solution that the computation and memory overhead of LLMs can be solved by utilizing FPGA-specific resources (e.g., DSP48 and heterogeneous memory hierarchy). We propose a configurable sparse DSP chain to support different sparsity patterns with high computation efficiency. Second, we propose an always-on-chip decode scheme to boost memory bandwidth with mixed-precision support. Finally, to make FlightLLM available for real-world LLMs, we propose a length adaptive compilation method to reduce the compilation overhead. Implemented on the Xilinx Alveo U280 FPGA, FlightLLM achieves 6.0× higher energy efficiency and 1.8× better cost efficiency against commercial GPUs (e.g., NVIDIA V100S) on modern LLMs (e.g., LLaMA2-7B) using vLLM and SmoothQuant under the batch size of one. FlightLLM beats NVIDIA A100 GPU with 1.2× higher throughput using the latest Versal VHK158 FPGA.