There is increasing interest in hardware support for decimal arithmetic as a result of recent growth in commercial, financial, and Internet-based applications. Consequently, new specifications for decimal floating-point arithmetic have been added to the draft revision of the IEEE-754 Standard for floating-point arithmetic. This paper introduces and analyzes three techniques for performing fast decimal addition on multiple binary coded decimal (BCD) operands. Two of the techniques speculate BCD correction values and correct intermediate results while adding the input operands. The first speculates over one addition. The second speculates over two additions. The third technique uses a binary carry-save adder tree and produces a binary sum. Combinational logic is then used to correct the sum and determine the carry into the next more significant digit. Multioperand adder designs are constructed and synthesized for four to 16 input operands. Analyses are performed on the synthesis results and the merits of each technique are discussed. Finally, these techniques are compared to several previous techniques for high-speed decimal addition.

Decimal arithmetic is regaining popularity in the computing community due to the growing importance of commercial, financial, and Internet-based applications, which process decimal data. This paper presents an iterative decimal multiplier, which operates at high clock frequencies and scales well to large operand sizes. The multiplier uses a new decimal representation for intermediate products, which allows for a very fast two-stage iterative multiplier design. Decimal multipliers, which are synthesized using a 0.11 micron CMOS standard cell library, operate at clock frequencies close to 2 GHz. The latency of the proposed design to multiply two n-digit BCD operands is (n+8) cycles with a new multiplication able to begin every (n+1) cycles.