Traditionally, an unsuccessful packet reception, either due to channel conditions or interference from multiple sources (collisions), is discarded and followed by a new reception of the same packet. Network diversity multiple access (NDMA) handles collisions by using time diversity multipacket reception: the base station forces terminals to transmit P copies of each packet when P terminals collide. This rigidity of having P copies is unsuitable for poor propagation conditions. It might be desirable to have more than P copies of a given packet, adopting a technique for single packet reception called hybrid-ARQ. Hybrid-ARQ effectively decreases the packet error rate. This paper proposes such mechanism for multi-packet reception, called hybrid-ARQ NDMA (H-NDMA), a gated slotted random access protocol, where the access mechanism forces the terminals involved in a collision with reception errors to transmit more than P times. Analytical models for the throughput, delay and energy per useful packet are proposed. The energy performance is analyzed for bounded average delay constraints. The proposed system's performance is evaluated for a single-carrier with frequency domain equalization (SC-FDE) scheme, and compared with the classical NDMA protocol. The comparison highlights that H- NDMA is scalable for an increasing number of terminals and network load.

This paper presents a Medium Access Control (MAC) protocol solution designed to properly handle collisions when in the presence of a multi-packet detection receiver for Single-Carrier (SC) modulations with Frequency-Domain Equalization (FDE). It is considered an iterative frequency-domain receiver that jointly performs equalization, multi-packet separation and channel decoding operations, for up to Qmaxmobile terminals transmitting in one slot. In this work, it is proposed and evaluated a p-persistent Network Diversity Multiple Access (NDMA) random MAC protocol designed to cope with a total number of mobile terminals J, for a maximum decoding capability of Qmaxsimultaneous packets. An accurate analytical model is presented to optimize two different scenarios: in the first one, a saturated network is considered and it is determined the packet transmission probability that maximizes the uplink throughput; the second represents a non-saturated network and the goal is to compute the optimal transmission probability associated to each mobile terminal that minimizes the packet transmission delay. In the end, analytical results obtained through physical and MAC layer simulations are discussed.

The Quality of Service (QoS) requirements for modern broadband wireless systems can be very high, with small error rates and delays. Packets with errors are usually discarded and need to be retransmitted, leading to performance degradation. An alternative to simple retransmissions like Automatic Repeat reQuest (ARQ) schemes, that can minimize the degradation is to combine the signals associated to different transmission attempts, usually called diversity combining techniques. This paper considers the use of Single-Carrier (SC) modulations with Frequency-Domain Equalization (FDE) and low-complexity soft combining ARQ schemes. The time diversity combining technique presented in this paper, allows packets associated to different transmission attempts to be combined in a soft way so as to improve the performance. This technique is employed in a Time Division Multiple Access (TDMA) scheme. An accurate analytical model is proposed for the evaluation of the uplink packet delay in non-saturated traffic condition, and for the system's throughput (goodput) considering a generic packet arrival process. Physical (PHY) layer (packet error rates) and system-level (goodput and packet delay considering both PHY and Medium Access Control (MAC) layers) results are presented and validated by simulations for two distinctive arrival processes: Poisson and Geometric.

Traditionally, a packet with errors, either due to channel noise or collisions, is discarded and needs to be retransmitted, leading to performance losses. Network Diversity Multiple Access (NDMA) handles collisions by combining a multipacket detection scheme with time diversity. In NDMA, the base station (BS) forces mobile terminals (MTs) to transmit J copies of each packet when J MTs collide. Diversity combining is limited to J copies of the packets, not allowing it to adapt to severe errors due to channel noise. This paper considers a multipacket detection scheme recently proposed, which reduces the packet error rate (PER) when more than J copies of the packets are available. In this paper, an Hybrid-ARQ NDMA access mechanism is proposed. The access mechanisms forces MTs with reception errors during a collision resolution epoch to transmit more than J times. Analytical models are proposed for the goodput and delay, considering Poisson traffic. The proposed system's performance is evaluated for a Single-Carrier with Frequency Domain Equalization (SC-FDE) scheme, and compared to classical NDMA.

This paper considers the use of low-complexity diversity combining hybrid ARQ schemes (Automatic Repeat reQuest) on a TDMA (Time Division Multiple Access) system. Its low complexity makes it particularly interesting for battery-powered nodes of a wireless sensor network (WSN). TDMA is commonly used for WSNs applications that require high throughput or constrained packet delay. This paper analyzes the energy per useful packet, packet delay and goodput performances of the TDMA system. Analytical models were used to define a constrained energy optimization problem, where the minimum transmission power is calculated based on the goodput and delay constraints. Analytical results were validated through simulations.

Lost packets, either due to errors or collisions, are usually discarded and need to be retransmitted, leading to performance losses. In this paper we compare the performance of two different approaches to cope with lost packets. One alternative is a multi-packet detection approach able to separate up to Qmaxmobile terminals transmitting in one slot. The other alternative is a low-complexity soft combining ARQ scheme (Automatic Repeat reQuest) employed in a TDMA (Time Division Multiple Access) architecture. This paper evaluates the uplink non-saturated packet delay and goodput for a Poisson traffic generator. Our analytical results are validated by simulation using joint PHY (physical layer) and MAC (Medium Access Control) behavior.

This paper considers the use of a code combining hybrid ARQ scheme (Automatic Repeat reQuest) on a TDMA (Time Division Multiple Access) system. A multi-rate turbo-code is proposed to implement the H-ARQ scheme, allowing improved performances. This paper analyzes the energy per packet successfully received, the packet delay and goodput performances for the TDMA system on a HAP (High Altitude Platform). Analytical models were used to define a constrained energy optimization problem, where the minimum transmission power is calculated based on the goodput and delay constraints. Analytical results were validated through simulations for a typical HAP Network uplink channel.

This paper proposes the Mobile MH-MAC (Multimode Hybrid - Medium Access Control) protocol, an extension of MH-MAC with enhanced support for mobility on wireless sensor networks. It provides an asynchronous mode for energy efficiency during idle (unconnected) periods, and a synchronous mode for high throughput periods. Mode change is controlled by the application in a cross-layer approach. MMH-MAC was specially designed to tolerate asynchronous mobile nodes in the neighborhood of synchronous nodes, providing fast transition and interference mitigation mechanisms. Current MAC protocols rely on a passive method to associate a mobile node to a static cluster, triggered by the reception of a beacon. We propose an active approach that allows a mobile node to start sending data packets shortly after entering into data range of a static node, with negligible data loss in existing synchronous data connections. MMH-MAC was implemented in TinyOS and tested on TelosB motes and TOSSIM simulator.

This paper deals with multi-packet detection for SC modulations (Single-Carrier) with FDE (Frequency- Domain Equalization). We consider iterative frequency-domain receivers that jointly perform equalization, multi-packet separation and channel decoding operations, for up to Qmaxmobile terminals transmitting in one slot. In this paper we propose an accurate analytical model for a p-persistent random access MAC protocol, designed to handle a total number of mobile terminals J above Qmax. It evaluates the uplink non-saturated packet delay and calculates the optimal configuration for the packet transmission probability associated to each mobile terminal that minimizes the delay. Our analytical results are validated using physical and MAC layer simulations.

This paper considers the use of SC modulations (Single-Carrier) with FDE (Frequency-Domain Equalization) with low-complexity soft combining ARQ schemes (Automatic Repeat reQuest). With our technique, packets associated to different transmission attempts are combined in a soft way, allowing improved performances. Its low complexity makes it particularly interesting for the uplink of wireless systems. This paper proposes an accurate analytical model for a TDMA (Time Division Multiple Access) scheme where packet combining ARQ is applied. It evaluates the uplink non-saturated packet delay and goodput for a generic message arrival process. Our analytical results are validated using physical and MAC layer simulations.

This paper deals with multi-packet detection for SC modulations (Single-Carrier) with FDE (Frequency-Domain Equalization). We consider iterative frequency- domain receivers that jointly perform the equalization, multi-packet separation and channel decoding operations. Our receivers allow a high throughput provided that the number of mobile terminals that is trying to access a given slot is equal to or below the multi-packet detection capacity Qmax. We propose a new MAC protocol that allows a total number of mobile terminals J above Qmaxby controlling the number of mobile terminals contending to transmit. The paper evaluates the uplink saturated system throughput and proposes an optimal configuration for the packet transmission probability associated to each mobile terminal. Our analytical results are validated using physical and MAC layer simulations.

The traditional approach to cope with collisions is to discard the packets involved in it and to ask for their retransmission. However, since the signal associated to a collision has important information concerning the packets involved, we can efficiently resolve collisions with proper retransmissions. In this paper we consider severely time-dispersive channels and we propose a technique that allows efficient packet separation. We employ SC-FDE schemes (single-carrier with frequency-domain equalization) and we propose an iterative frequency-domain multi-packet detection. Since our technique requires uncorrelated channels for different retransmissions, we also propose an SP technique (Shifted Packets) for retransmissions in fixed channels. Since the total number of transmissions is equal to the number of packets involved in the collision (even when the channel remains fixed for the retransmissions), our technique allows high throughputs. The analysis of our detection technique combined with the NMDA (network-assisted diversity multiple access) MAC (medium access control) protocol shows significant throughput and delay improvements for low Eb/N0values compared to a TDMA (time division multiple access) approach, where collisions are avoided. This technique is particularly appealing for the uplink of broadband wireless systems, since we consider SC-FDE schemes and the complexity is concentrated in the receiver. By employing the SP scheme we can use the same channel for the retransmissions, with only a small performance degradation.

This paper proposes MH-MAC, a new MAC protocol for wireless sensor networks capable of handling applications that generate infrequent huge peaks of traffic. Existing protocols are not adapted to this kind of applications. Asynchronous protocols are energy efficient for the long inactive periods, but fail to cope with the bandwidth and latency requirements of the traffic peaks when more than two nodes are sending data to a common sink. Synchronous protocols that support contention free slots provide good throughput for handling the load peaks, but consume unnecessary energy maintaining clocks synchronized for very long idle periods. MH-MAC is a multimode hybrid protocol that can be configured by the application to run in asynchronous mode or in synchronous mode, with or without contention, providing the best possible trade-off. MH-MAC is a single-hop MAC, which supports multi-hop applications through a cross-layering API. The paper includes simulation results with the energy consumption, latency and throughput for the operation modes of MH-MAC, showing the asynchronous-synchronous trade-offs and the state transition overhead.