In datacenters, lossless network is very attractive as it can achieve ultra-low latency. In commodity Ethernet, lossless forwarding is achieved by hop-by-hop Priority-based Flow Control (PFC). To avoid buffer overflow, PFC-enabled switches need to reserve some buffer asheadroom, absorbing in-flight packets during the delay for backpressure messages to take effect. However, with the growing link speed in production networks, the buffer becomes increasingly insufficient, and the headroom can occupy a considerable fraction of buffer. As a result, the remaining buffer for absorbing normal traffic bursts is significantly squeezed, leading to frequent PFC messages that degrade the network performance. Worse yet, we find that the current static and queue-independent headroom allocation scheme is quite inefficient, resulting in significant buffer wastage. In light of this, we propose Dynamic and Shared Headroom allocation scheme (DSH), which dynamically allocates headroom to congested queues and enables sharing of allocated headroom among different queues. To achieve this, DSH first introduces port-level flow control, which performs flow control at the granularity of individual ports, guaranteeing lossless forwarding with a small fraction of per-port headroom. With this lossless guarantee, the switch is liberated for dynamic headroom adjustment. DSH dynamically allocates per-queue headroom based on the congestion status of each queue. Meanwhile, DSH preserves the queue-level flow control to protect the non-congested queues from being paused by congested queues, ensuring performance isolation on buffer sharing. Extensive experiments show that DSH can reduce the flow completion time by up to ~78.8%.

Today's high-speed switches employ an on-chip shared packet buffer. The buffer is becoming increasingly insufficient as it cannot scale with the growing switching capacity. Nonetheless, the buffer needs to face highly intense bursts and meet stringent performance requirements for datacenter applications. This imposes rigorous demand on the Buffer Management (BM) scheme, which dynamically allocates the buffer across queues. However, the de facto BM scheme, designed over two decades ago, is ill-suited to meet the requirements of today's network.

For providers operating large-scale global networks, the timeliness of network failure recovery significantly affects the reliability of network services. Ideally, a network monitoring system should have enough coverage to detect even minor issues, but high coverage means alert floods during severe network failures. In practice, there is a gap between the flooding raw alerts data collected by network monitoring tools and the readable information needed for failure diagnosis. Existing solutions using limited network monitoring data sources and heuristic diagnostic rules, lack comprehensive coverage and the capability to address severe failures, especially which network operators have never handled a similar one before. This paper presents SkyNet, a network analysis system to extract scope and severity information from alert floods. SkyNet ensures comprehensive coverage by integrating multiple monitoring data sources through a uniform input format, enhancing extensibility for new network monitoring tools. During alert floods, SkyNet groups alerts, assesses their severity, and filters out insignificant ones to aid network operators in mitigating network failures. To date, SkyNet has been running stably on our network for one and a half years without any false negatives and has successfully reduced the time-to-mitigation for over 80% of network failures since its deployment in production.