The IEEE 802.11 based Wireless LANs (WLANs) have emerged as a viable technology for supporting real-time applications such as voice over IP (VoIP). Even the personal digital assistants and Smartphones are being equipped with WLAN, leading such devices to operate in dual-mode with the WLAN and WAN (wide area network) radios capable of supporting IP communication. This development enables applications such as VoIP to roam or handover freely across the two networks. Seamless handover of VoIP between such networks poses two challenges: the call must persist in spite of mobility across networks, and the LAN and WAN must support the delay and packet loss requirement bounds for VoIP calls. In this paper, we present an experimental study of best-effort VoIP handovers across WLAN and the CDMA EVDO networks, using Skype as the VoIP application. The objectives of our study were: to understand and evaluate the mobility events and actions taking place in a handover; to evaluate the feasibility of running VoIP over WLAN and CDMA EVDO in the process of understanding mobility; and to provide insight into further research in this area. Our study shows that EVDO link acquisition latency and downlink scheduling, and IP mobility procedures contribute towards VoIP call failures. These results provide crucial input to the design of best-effort real-time applications as well as mobility protocols.

Flash crowds and high concentrations of users in wireless LANs (WLANs) cause significant interference problems and unsustainable load at access points. This leads to poor connectivity for users, severe performance degradation, and possible WLAN collapse. To validate this claim, we present two case studies of large, heavily loaded operational WLANs. These studies provide significant insight into the degraded performance and collapse of a WLAN during heavy use. To address these problems, we propose IQU, a practical queue-based user association management system for heavily loaded WLANs. IQU grants users fair opportunities to access the WLAN while maintaining high overall throughput, even when the WLAN is heavily loaded. The basic premise of IQU is to control user associations with the WLAN through request queues and work period allocations. We implement a prototype of IQU and evaluate it on a wireless testbed. Our evaluation demonstrates that IQU significantly improves network throughput under heavy load; the tradeoff is that users have to wait for network access. We explore the impact of IQU parameters on system performance, and validate the robustness of IQU under heavy load conditions. Through IQU, WLANs can be utilized efficiently and network collapse prevented.

Simulation environments are an important tool for the evaluation of new concepts in networking. The study of mobile ad hoc networks depends on understanding protocols from simulations, before these protocols are implemented in a real-world setting. To produce a real-world environment within which an ad hoc network can be formed among a set of nodes, there is a need for the development of realistic, generic and comprehensive mobility, and signal propagation models. In this paper, we propose the design of a mobility and signal propagation model that can be used in simulations to produce realistic network scenarios. Our model allows the placement of obstacles that restrict movement and signal propagation. Movement paths are constructed as Voronoi tessellations with the corner points of these obstacles as Voronoi sites. Our mobility model also introduces a signal propagation model that emulates properties of fading in the presence of obstacles. As a result, we have developed a complete environment in which network protocols can be studied on the basis of numerous performance metrics. Through simulation, we show that the proposed mobility model has a significant impact on network performance, especially when compared with other mobility models. In addition, we also observe that the performance of ad hoc network protocols is effected when different mobility scenarios are utilized.

One of the most important methods for evaluating the characteristics of ad hoc networking protocols is through the use of simulation. Simulation provides researchers with a number of significant benefits, including repeatable scenarios, isolation of parameters, and exploration of a variety of metrics. The topology and movement of the nodes in the simulation are key factors in the performance of the network protocol under study. Once the nodes have been initially distributed, the mobility model dictates the movement of the nodes within the network. Because the mobility of the nodes directly impacts the performance of the protocols, simulation results obtained with unrealistic movement models may not correctly reflect the true performance of the protocols. The majority of existing mobility models for ad hoc networks do not provide realistic movement scenarios; they are limited to random walk models without any obstacles. In this paper, we propose to create more realistic movement models through the incorporation of obstacles. These obstacles are utilized to both restrict node movement as well as wireless transmissions. In addition to the inclusion of obstacles, we construct movement paths using the Voronoi diagram of obstacle vertices. Nodes can then be randomly distributed across the paths, and can use shortest path route computations to destinations at randomly chosen obstacles. Simulation results show that the use of obstacles and pathways has a significant impact on the performance of ad hoc network protocols.