Recently, Feature-wise Linear Modulation (FiLM) has been shown to outperform other approaches to incorporate speaker embedding into speech separation and VoiceFilter models. We propose an improved method of incorporating such embeddings into a Voice- Filter frontend for automatic speech recognition (ASR) and text- independent speaker verification (TI-SV). We extend the widely- used Conformer architecture to construct a FiLM Block with additional feature processing before and after the FiLM layers. Apart from its application to single-user VoiceFilter, we show that our system can be easily extended to multi-user VoiceFilter models via element-wise max pooling of the speaker embeddings in a projected space. The final architecture, which we call Conditional Conformer, tightly integrates the speaker embeddings into a Conformer backbone. We improve TI-SV equal error rates by as much as 56% over prior multi-user VoiceFilter models, and our element-wise max pooling reduces relative WER compared to an attention mechanism by as much as 10%.

In this paper, we explore reducing computational latency of the 2-pass cascaded encoder model [1]. Specifically, we experiment with reducing the size of the causal 1st-pass and adding capacity to the non-causal 2nd-pass, such that the overall latency can be reduced without loss of quality. In addition, we explore using a confidence model for deciding to stop 2nd-pass recognition if we are confident in the 1st-pass hypothesis. Overall, we are able to reduce latency by a factor of 1.7X, compared to the baseline cascaded encoder from [1]. Secondly, with the added capacity in the non-causal 2nd-pass, we find that we can improve WER by up to 7% relative using wav2vec and minimum word-error-rate (MWER) training.

In voice-enabled applications, a predetermined hotword is usually used to activate a device in order to attend to the query.However, speaking queries followed by a hotword each time introduces a cognitive burden in continued conversations.To avoid repeating a hotword, we propose a streaming end-to-end (E2E) intended query detector that identifies the utterances directed towards the device and filters out other utterances not directed towards device.The proposed approach incorporates the intended query detector into the E2E model that already folds different components of the speech recognition pipeline into one neural network.The E2E modeling on speech decoding and intended query detection also allows us to declare a quick intended query detection based on early partial recognition result, which is important to decrease latency and make the system responsive.We demonstrate that the proposed E2E approach yields a 22% relative improvement on equal error rate (EER) for the detection accuracy and 600 ms latency improvement compared with an independent intended query detector.In our experiment, the proposed model detects whether the user is talking to the device with a 8.7% EER within 1.4 seconds of median latency after user starts speaking.

Personalization of on-device speech recognition (ASR) has seen explosive growth in recent years, largely due to the increasing popularity of personal assistant features on mobile devices and smart home speakers. In this work, we present Personal VAD 2.0, a personalized voice activity detector that detects the voice activity of a target speaker, as part of a streaming on-device ASR system. Although previous proof-of-concept studies have validated the effectiveness of Personal VAD, there are still several critical challenges to address before this model can be used in production: first, the quality must be satisfactory in both enrollment and enrollment-less scenarios; second, it should operate in a streaming fashion; and finally, the model size should be small enough to fit a limited latency and CPU/Memory budget. To meet the multi-faceted requirements, we propose a series of novel designs: 1) advanced speaker embedding modulation methods; 2) a new training paradigm to generalize to enrollment-less conditions; 3) architecture and runtime optimizations for latency and resource restrictions. Extensive experiments on a realistic speech recognition system demonstrated the state-of-the-art performance of our proposed method.

In this paper, we propose a dynamic cascaded encoder Automatic Speech Recognition (ASR) model, which unifies models for different deployment scenarios. Moreover, the model can significantly reduce model size and power consumption without loss of quality. Namely, with the dynamic cascaded encoder model, we explore three techniques to maximally boost the performance of each model size: 1) Use separate decoders for each sub-model while sharing the encoders; 2) Use funnel-pooling to improve the encoder efficiency; 3) Balance the size of causal and non-causal encoders to improve quality and fit deployment constraints. Overall, the proposed large-medium model has 30% smaller size and reduces power consumption by 33%, compared to the baseline cascaded encoder model. The triple-size model that unifies the large, medium, and small models achieves 37% total size reduction with minimal quality loss, while substantially reducing the engineering efforts of having separate models.

On-device end-to-end (E2E) models have shown improvements over a conventional model on English Voice Search tasks in both quality and latency.E2E models have also shown promising results for multilingual automatic speech recognition (ASR).In this paper, we extend our previous capacity solution to streaming applications and present a streaming multilingual E2E ASR system that runs fully on device with comparable quality and latency to individual monolingual models.To achieve that, we propose an Encoder Endpointer model and an End-of-Utterance (EOU) Joint Layer for a better quality and latency trade-off.Our system is built in a language agnostic manner allowing it to natively support intersentential code switching in real time.To address the feasibility concerns on large models, we conducted on-device profiling and replaced the time consuming LSTM decoder with the recently developed Embedding decoder.With these changes, we managed to run such a system on a mobile device in less than real time.

In this paper, we propose a solution to allow speaker conditioned speech models, such as VoiceFilter-Lite, to support an arbitrary number of enrolled users in a single pass. This is achieved via an attention mechanism on multiple speaker embeddings to compute a single attentive embedding, which is then used as a side input to the model. We implemented multi-user VoiceFilter-Lite and evaluated it for three tasks: (1) a streaming automatic speech recognition (ASR) task; (2) a text-independent speaker verification task; and (3) a personalized keyphrase detection task, where ASR has to detect keyphrases from multiple enrolled users in a noisy environment. Our experiments show that, with up to four enrolled users, multi-user VoiceFilter-Lite is able to significantly reduce speech recognition and speaker verification errors when there is overlapping speech, without affecting performance under other acoustic conditions. This attentive speaker embedding approach can also be easily applied to other speaker-conditioned models such as personal voice activity detection (VAD) and personalized ASR.

End-to-end (E2E) models have shown to outperform state-of-the-art conventional models for streaming speech recognition [1] across many dimensions, including quality (as measured by word error rate (WER)) and endpointer latency [2]. However, the model still tends to delay the predictions towards the end and thus has much higher partial latency compared to a conventional ASR model. To address this issue, we look at encouraging the E2E model to emit words early, through an algorithm called FastEmit [3]. Naturally, improving on latency results in a quality degradation. To address this, we explore replacing the LSTM layers in the encoder of our E2E model with Conformer layers [4], which has shown good improvements for ASR. Secondly, we also explore running a 2nd-pass beam search to improve quality. In order to ensure the 2nd-pass completes quickly, we explore non-causal Conformer layers that feed into the same 1st-pass RNN-T decoder, an algorithm called Cascaded Encoders [5]. Overall, the Conformer RNN-T with Cascaded Encoders offers a better quality and latency tradeoff for streaming ASR.

Knowledge Distillation is an effective method of transferring knowledge from a large model to a smaller model. Distillation can be viewed as a type of model compression, and has played an important role for on-device ASR applications. In this paper, we develop a distillation method for RNN-Transducer (RNN-T) models, a popular end-to-end neural network architecture for streaming speech recognition. Our proposed distillation loss is simple and efficient, and uses only the "y" and "blank" posterior probabilities from the RNN-T output probability lattice. We study the effectiveness of the proposed approach in improving the accuracy of sparse RNN-T models obtained by gradually pruning a larger uncompressed model, which also serves as the teacher during distillation. With distillation of 60% and 90% sparse multi-domain RNN-T models, we obtain WER reductions of 4.3% and 12.1% respectively, on a noisy FarField eval set. We also present results of experiments on LibriSpeech, where the introduction of the distillation loss yields a 4.8% relative WER reduction on the test-other dataset for a small Conformer model.

In automatic speech recognition (ASR), model pruning is a widely adopted technique that reduces model size and latency to deploy neural network models on edge devices with resource constraints. However, multiple models with different sparsity levels usually need to be separately trained and deployed to heterogeneous target hardware with different resource specifications and for applications that have various latency requirements. In this paper, we present Dynamic Sparsity Neural Networks (DSNN) that, once trained, can instantly switch to any predefined sparsity configuration at run-time. We demonstrate the effectiveness and flexibility of DSNN using experiments on internal production datasets with Google Voice Search data, and show that the performance of a DSNN model is on par with that of individually trained single sparsity networks. Our trained DSNN model, therefore, can greatly ease the training process and simplify deployment in diverse scenarios with resource constraints.

In this paper, we introduce a streaming keyphrase detection system that can be easily customized to accurately detect any phrase composed of words from a large vocabulary. The system is implemented with an end-to-end trained automatic speech recognition (ASR) model and a text-independent speaker verification model. To address the challenge of detecting these keyphrases under various noisy conditions, a speaker separation model is added to the feature frontend of the speaker verification model, and an adaptive noise cancellation (ANC) algorithm is included to exploit cross-microphone noise coherence. Our experiments show that the text-independent speaker verification model largely reduces the false triggering rate of the keyphrase detection, while the speaker separation model and adaptive noise cancellation largely reduce false rejections.

Thus far, end-to-end (E2E) models have not been shown to outperform state-of-the-art conventional models with respect to both quality, i.e., word error rate (WER), and latency, i.e., the time the hypothesis is finalized after the user stops speaking. In this paper, we develop a first-pass Recurrent Neural Network Transducer (RNN-T) model and a second-pass Listen, Attend, Spell (LAS) rescorer that surpasses a conventional model in both quality and latency. On the quality side, we incorporate a large number of utterances across varied domains [1] to increase acoustic diversity and the vocabulary seen by the model. We also train with accented English speech to make the model more robust to different pronunciations. In addition, given the increased amount of training data, we explore a varied learning rate schedule. On the latency front, we explore using the end-of-sentence decision emitted by the RNN-T model to close the microphone, and also introduce various optimizations to improve the speed of LAS rescoring. Overall, we find that RNN-T+LAS offers a better WER and latency tradeoff compared to a conventional model. For example, for the same latency, RNN-T+LAS obtains a 8% relative improvement in WER, while being more than 400-times smaller in model size.

End-to-end (E2E) models, which directly predict output character sequences given input speech, are good candidates for on-device speech recognition. E2E models, however, present numerous challenges: In order to be truly useful, such models must decode speech utterances in a streaming fashion, in real time; they must be robust to the long tail of use cases; they must be able to leverage user-specific context (e.g., contact lists); and above all, they must be extremely accurate. In this work, we describe our efforts at building an E2E speech recog-nizer using a recurrent neural network transducer. In experimental evaluations, we find that the proposed approach can outperform a conventional CTC-based model in terms of both latency and accuracy in a number of evaluation categories.

The requirements for many applications of state-of-the-art speech recognition systems include not only low word error rate (WER) but also low latency. Specifically, for many use-cases, the system must be able to decode utterances in a streaming fashion and faster than real-time. Recently, a streaming recurrent neural network transducer (RNN-T) end-to-end (E2E) model has shown to be a good candidate for on-device speech recognition, with improved WER and latency metrics compared to conventional on-device models [1]. However, this model still lags behind a large state-of-the-art conventional model in quality [2]. On the other hand, a non-streaming E2E Listen, Attend and Spell (LAS) model has shown comparable quality to large conventional models [3]. This work aims to bring the quality of an E2E streaming model closer to that of a conventional system by incorporating a LAS network as a second-pass component, while still abiding by latency constraints. Our proposed two-pass model achieves a 17%-22% relative reduction in WER compared to RNN-T alone and increases latency by a small fraction over RNN-T.