Dynamic partial reconfiguration significantly reduces reconfiguration times when offloading a partial design. However, there are occasions when fine-tuning a circuit would greatly benefit from quicker reconfiguration times. To that end, authors present an automated tool and runtime support to reconfigure LUT-based multiplexers and constants. In contrast to conventional multiplexers and constants, it is possible to modify these components without having a direct communication with the static system.

Evolvable Hardware (EH) is a technique that consists of using reconfigurable hardware devices whose configuration is controlled by an Evolutionary Algorithm (EA). Our system consists of a fully-FPGA implemented scalable EH platform, where the Reconfigurable processing Core (RC) can adaptively increase or decrease in size. Figure 1 shows the architecture of the proposed System-on-Programmable-Chip (SoPC), consisting of a MicroBlaze processor responsible of controlling the whole system operation, a Reconfiguration Engine (RE), and a Reconfigurable processing Core which is able to change its size in both height and width. This system is used to implement image filters, which are generated autonomously thanks to the evolutionary process. The system is complemented with a camera that enables the usage of the platform for real time applications.

This paper presents an evolvable hardware system, fully contained in an FPGA, which is capable of autonomously generating digital processing circuits, implemented on an array of processing elements (PEs). Candidate circuits are generated by an embedded evolutionary algorithm and implemented by means of dynamic partial reconfiguration, enabling evaluation in the final hardware. The PE array follows a systolic approach, and PEs do not contain extra logic such as path multiplexers or unused logic, so array performance is high. Hardware evaluation in the target device and the fast reconfiguration engine used yield smaller reconfiguration than evaluation times. This means that the complete evaluation cycle is faster than software-based approaches and previous evolvable digital systems. The selected application is digital image filtering and edge detection. The evolved filters yield better quality than classic linear and nonlinear filters using mean absolute error as standard comparison metric. Results do not only show better circuit adaptation to different noise types and intensities, but also a nondegrading filtering behavior. This means they may be run iteratively to enhance filtering quality. These properties are even kept for high noise levels (40 percent). The system as a whole is a step toward fully autonomous, adaptive systems.

Adaptive hardware requires some reconfiguration capabilities. FPGAs with native dynamic partial reconfiguration (DPR) support pose a dilemma for system designers: whether to use native DPR or to build a virtual reconfigurable circuit (VRC) on top of the FPGA which allows selecting alternative functions by a multiplexing scheme. This solution allows much faster reconfiguration, but with higher resource overhead. This paper discusses the advantages of both implementations for a 2D image processing matrix. Results show how higher operating frequency is obtained for the matrix using DPR. However, this is compensated in the VRC during evolution due to the comparatively negligible reconfiguration time. Regarding area, the DPR implementation consumes slightly more resources due to the reconfiguration engine, but adds further more capabilities to the system.