The bandwidth required for TV content distribution is rapidly increasing due to the evolution of high definition TV (HDTV) and ultra HDTV. Service providers are constantly trying to differentiate themselves by innovating new ways of distributing content more efficiently with lower cost and higher penetration. We propose a cost-efficient wireless architecture [wireless live TV (WiLiTV)], consisting of a mix of wireless access technologies [satellite, Wi-Fi, and LTE/5G millimeter wave (mmWave) overlay links], for delivering live TV services. In the proposed architecture, live TV content is injected into the network at selected locations, consisting of some homes and/or cellular base stations, using satellite antennas. The content is then further distributed to other homes using a house-to-house Wi-Fi network or an LTE/5G mmWave overlay. We construct an optimal content distribution network with the minimum number of satellite injection points, while preserving the highest quality of experience, for different neighborhood densities. We evaluate the framework using time-varying demand patterns and a diverse set of home location data provided from an operational content distribution network. Our study demonstrates that this architecture reduces the overall cost by 60% compared with the traditional architecture. We have also shown that the WiLiTV is robust in its support for several TV formats.

User location is of critical importance to cellular network operators. It is often used for network capacity planning and to aid in the analysis of service and network diagnostics. However, existing localization techniques rely on user-provided information (e.g., Angle-of-Arrival), which are not available to the operator, and often require a significant effort to collect training data. Our main contribution is the design and evaluation of the Network-Based Localization (NBL) System for localizing a user in a 4G LTE network. The NBL System consists of 2 stages. In an offline stage, we develop RF coverage maps based on a large-scale crowd-sourced channel measurement campaign. Then, in an online stage, we present a localization algorithm to quickly match RF measurements (which are already collected as part of normal network operation) to coverage map locations. The system is more practical than related works, as it does not make any assumptions about user mobility, nor does it require expensive manual training measurements. Despite the realistic assumptions, our extensive evaluations in a national 4G LTE network show that the NBL System achieves a localization accuracy which is comparable to related works (i.e., a median accuracy of 5% of the cell's coverage region).

In this paper, we consider medium access control (MAC) policies for emerging systems that are equipped with fully digital antenna arrays which are capable of adaptive multi-beam directional communications. With this technology, a user can form multiple simultaneous transmit or receive beams, allowing for greater spatial reuse and higher network throughput. The enabling technology that we consider is the ability to use digital post-processing to form multiple receive beams in real-time without a priori knowledge of the time and angle-of-arrival of the transmission. We present a novel unslotted, uncoordinated ALOHA-like random access MAC policy for multi-beam directional systems that asymptotically achieves the capacity of the network. Such an approach is particularly useful for systems where propagation delay makes the overhead associated with any sort of coordination prohibitive. We also consider the impact of numerous practical considerations including power constraints, latency, and beamwidth on the performance of our MAC policy.

Object tracking applications are gaining popularity and will soon utilize Energy Harvesting (EH) low-power nodes that will consume power mostly for Neighbor Discovery (ND) (i.e., identifying nodes within communication range). Although ND protocols were developed for sensor networks, the challenges posed by emerging EH low-power transceivers were not addressed. Therefore, we design an ND protocol tailored for the characteristics of a representative EH prototype: the TI eZ430-RF2500-SEH. We present a generalized model of ND accounting for unique prototype characteristics (i.e., energy costs for transmission/reception, and transceiver state switching times/costs). Then, we present the Power Aware Neighbor Discovery Asynchronously (Panda) protocol in which nodes transition between the sleep, receive, and transmit states. We analyze Panda and select its parameters to maximize the ND rate subject to a homogeneous power budget. We also present Panda-D, designed for non-homogeneous EH nodes. We perform extensive testbed evaluations using the prototypes and study various design tradeoffs. We demonstrate a small difference (less then 2%) between experimental and analytical results, thereby confirming the modeling assumptions. Moreover, we show that Panda improves the ND rate by up to 3x compared to related protocols. Finally, we show that Panda-D operates well under non-homogeneous power harvesting.

Object tracking applications are gaining popularity and will soon utilize energy harvesting low-power wireless nodes where power is mostly consumed for neighbor discovery. Such applications require the design and experimentation with low-power neighbor discovery protocols. We demonstrate the Panda protocol [4, 5] implementation using commercial off-the-shelf energy harvesting devices, based on the TI eZ430-RF2500-SEH prototype. The prototypes harvest indoor light energy to perform power-aware neighbor discovery, while maintaining a power budget. A custom-designed online monitoring system interactively demonstrates the network dynamics, including the energy storage levels of the devices, the neighbor discovery events, and aggregate discovery statistics.

Object tracking applications are gaining popularity and will soon utilize energy harvesting (EH) low-power nodes that will consume power mostly for neighbor discovery (ND) (i.e., identifying nodes within communication range). Although ND protocols were developed for sensor networks, the challenges posed by emerging EH low-power transceivers were not addressed. Therefore, we design an ND protocol tailoredfor the characteristics of a representative EH prototype: the TI eZ430-RF2500-SEH. We present a generalized model of ND accounting for unique prototype characteristics (i.e., energy costs for transmission/reception, and transceiver state switching times/costs). Then, we present the Power Aware ND Asynchronously (Panda) protocol, in which nodes transition between the sleep, receive, and transmit states. We analyze Panda and select its parameters to maximize the ND rate subject to a homogeneous power budget. We also present Panda-D, designed for non-homogeneous EH nodes. We perform extensive testbed evaluations using the prototypes and study various design tradeoffs. We demonstrate a small difference (less than 2%) between experimental and analytical results, thereby confirming the modeling assumptions. Moreover, we show that Panda improves the ND rate by up to 3× compared with related protocols. Finally, we show that Panda-D operates well under non-homogeneous power harvesting.

Proportional Fair (PF) scheduling algorithms are the de facto standard in cellular networks. They exploit the users' channel state diversity (induced by fast-fading) and are optimal for stationary channel state distributions and an infinite time-horizon. However, mobile users experience a nonstationary channel, due to slow-fading (on the order of seconds), and are associated with base stations for short periods. Hence, we develop the Predictive Finite-horizon PF Scheduling ((PF)2S) Framework that exploits mobility. We present extensive channel measurement results from a 3G network and characterize mobility-induced channel state trends. We show that a user's channel state is highly reproducible and leverage that to develop a data rate prediction mechanism. We then present a few channel allocation estimation algorithms that exploit the prediction mechanism. Our trace-based simulations consider instances of the (PF)2S Framework composed of combinations of prediction and channel allocation estimation algorithms. They indicate that the framework can increase the throughput by 15%-55% compared to traditional PF schedulers, while improving fairness.

This article focuses on a new type of wireless devices in the domain between RFIDs and sensor networks—Energy-Harvesting Active Networked Tags (EnHANTs). Future EnHANTs will be small, flexible, and self-powered devices that can be attached to objects that are traditionally not networked (e.g., books, furniture, toys, produce, and clothing). Therefore, they will provide the infrastructure for various tracking applications and can serve as one of the enablers for the Internet of Things. We present the design considerations for the EnHANT prototypes, developed over the past 4 years. The prototypes harvest indoor light energy using custom organic solar cells, communicate and form multihop networks using ultra-low-power Ultra-Wideband Impulse Radio (UWB-IR) transceivers, and dynamically adapt their communications and networking patterns to the energy harvesting and battery states. We describe a small-scale testbed that uniquely allows evaluating different algorithms with trace-based light energy inputs. Then, we experimentally evaluate the performance of different energy-harvesting adaptive policies with organic solar cells and UWB-IR transceivers. Finally, we discuss the lessons learned during the prototype and testbed design process.

Proportional Fair (PF) scheduling algorithms are the de-facto standard in cellular networks. They exploit the users' channel state diversity (induced by fast-fading), and are optimal for stationary channel state distributions and an infinite time-horizon. However, mobile users experience a non-stationary channel, due to slow-fading (on the order of seconds), and are associated with basestations for short periods. Hence, we develop the Predictive Finite-horizon PF Scheduling ((PF)2S) Framework that exploits mobility. We present extensive channel measurement results from a 3G network and characterize mobility-induced channel state trends. We show that a user's channel state is highly reproducible and leverage that to develop a data rate prediction mechanism. We then present a few channel allocation estimation algorithms that rely on the prediction mechanism. Our trace-based simulations consider instances of the PF2S Framework composed of combinations of prediction and channel allocation estimation algorithms. They indicate that the framework can increase the throughput by 15%–55% compared to traditional PF schedulers, while improving fairness.

This paper focuses on a new type of wireless devices in the domain between RFIDs and sensor networks - Energy Harvesting Active Networked Tags (EnHANTs). Future EnHANTs will be small, flexible, and self-powered devices that can be attached to objects that are traditionally not networked (e.g., books, toys, clothing), thereby providing the infrastructure for novel tracking applications. We present the design considerations for the EnHANT prototypes, developed over the past 3 years. The prototypes harvest indoor light energy using custom organic solar cells, communicate and form multihop networks using ultralow-power Ultra-Wideband Impulse Radio (UWB-IR) transceivers, and adapt their communications and networking patterns to the energy harvesting and battery states. We also describe a small scale EnHANTs testbed that uniquely allows evaluating different algorithms with trace-based light energy inputs.

Energy Harvesting Active Networked Tags (EnHANTs) are a new class of devices in the domain between RFIDs and sensor networks. EnHANTs will be small, flexible, and energetically self-reliant. Their development is enabled by advances in ultra-low-power ultra-wideband (UWB) communications and in organic semiconductor-based energy harvesting materials. In this demo, we present UWB-enabled EnHANT prototypes. Each prototype is based on a MICA2 mote integrated with a UWB Transceiver and an energy harvesting module (EHM) that allows demonstrating energy harvesting-adaptive communications. Additional information about EnHANTs is available at [2] and http://enhants.ee.columbia.edu.

Energy Harvesting Active Networked Tags (EnHANTs) will be a new class of devices in the domain between RFIDs and sensor networks. Small, flexible, and energetically self-reliant, EnHANTs will be attached to objects that are traditionally not networked, such as books, furniture, toys, produce, and clothing. More information about the EnHANTs project is available at http://enhants.ee.columbia.edu. In this demo we present a small network of EnHANT prototypes. The current EnHANT prototypes are integrated with novel custom in-house-developed energy harvesting and communications hardware, namely organic solar cells and ultra-wide-band impulse radio (UWB-IR) transceivers. The demo showcases prototypes communicating using the novel UWB-IR transceivers and adapting their communications and networking parameters to the available environmental energy harvested by the organic solar cells.