A frequency-shift keying (FSK) receiver has been designed for deep space applications which exhibits potential for ultra low power performance. The receiver is based on a novel, almost all-digital architecture. It supports a wide range of data rates and is very robust against large and fast frequency offsets due to Doppler. The architecture utilizes subsampling and 1-bit data processing together with a discrete Fourier transform-based detection scheme to enable power consumption dramatically lower than implementations reported in the literature. Novel and power-efficient algorithms are derived for frequency and timing tracking. Most of the power saving techniques are applicable to a variety of applications, but some are achieved by taking advantage of the asymmetric power constraints for the receiver and the transmitter as well as the absence of adjacent channel interferers. The worst-case bit-error rate (BER) performance of the receiver is just 2.5 dB below that of the optimal uncoded noncoherent FSK receiver at a BER of 10/sup -6/ and better for lower BERs.

A new flexible architecture is proposed for word-serial filtering and variable rate decimation/interpolation. The architecture is targeted for low power applications requiring medium to low data rate and is ideally suited for implementation on either an ASIC or an FPGA. It combines the small size and low power of an ASIC with the programmability and flexibility of a DSP. An efficient memory addressing scheme eliminates the need for power hungry shift registers and allows full reconfiguration via a single ROM. The decimation ratio, filter length and filter coefficients can all be changed in real-time. The architecture takes advantage of coefficient symmetries in linear phase filters and in polyphase components.

An FSK receiver has been designed for deep space applications which exhibits potential for ultra low power performance. The receiver is based on a novel, almost all-digital architecture. It supports a wide range of data rates and is very robust against large and fast frequency offsets due to Doppler. The architecture utilizes subsampling and 1-bit data processing together with a DFT based detection scheme to enable power consumption dramatically lower than implementations reported in literature. Novel and power efficient algorithms are derived for frequency and timing tracking. Most of the power saving techniques are applicable to a variety of applications, but some are achieved by taking advantage of the asymmetric power constraints for the receiver and the transmitter as well as the absence of adjacent channel interferers. The worst case BER performance of the receiver is just 2.5 dB below that of the optimal uncoded non-coherent FSK receiver at a BER of 10/sup -6/ and better for lower BERs.

A flexible and reconfigurable signal processing ASIC architecture has been developed, simulated, and synthesized. The proposed architecture compares favorably to classical DSP and FPGA solutions. It differs from general-purpose reconfigurable computing (RC) platforms by emphasizing high-speed application-specific computations over general-purpose flexibility. The proposed architecture can he used to realize any one of several functional blocks needed for the physical layer implementation of data communication systems operating at symbol rates in excess of 125 Msymbols/s. Multiple instances of a chip based on this architecture, each operating in a different mode, can be used to realize the entire physical layer of high-speed data communication systems. The architecture features the following modes (functions): real and complex FIR/IIR filtering, least mean square (LMS)-based adaptive filtering, discrete Fourier transforms (DFT), and direct digital frequency synthesis (DDFS) at up to 125 Msamples/s. All of the modes are mapped onto a common, regular data path with minimal configuration logic and routing. Multiple chips operating in the same mode can be cascaded to allow for larger blocks.