The introduction of transaction level modeling (TLM) allows a system designer to model a complete application, composed of hardware and software parts, at several levels of abstraction. The simulation speed of TLM is orders of magnitude faster than traditional RTL simulation; nevertheless, it can become a limiting factor when considering a multi-processor system-on-chip (MP-SoC), as the analysis of these systems can be very complex. The main goal of this paper is to introduce a novel way of exploiting TLM features to increase simulation efficiency of complex systems by switching TLM models at runtime. Results show that simulation performance can be increased significantly without sacrificing the accuracy of critical application kernels

This paper summarizes the characteristics of distributed object models used in large-scale distributed software systems. We examine the common subset of requirements for distributed software systems and systems-on-a-chip (SoC), namely: openness, heterogeneity and multiple forms of transparency. We describe the application of these concepts to the emerging class of complex, parallel SoC's, including multiple heterogeneous embedded processors interacting with hardware co-processors and I/O devices. An implementation of this approach is embodied in STMicroelectronics' DSOC (distributed system object component) programming model. The use of this programming model for an architecture exploration of STs Nomadik mobile multimedia platform is described

The MultiFlex system is an application-to-platform mapping tool that integrates heterogeneous parallel components-H/W or S/W- into a homogeneous platform programming environment. This leads to higher quality designs through encapsulation and abstraction. Two high-level parallel programming models are supported by the following MultiFlex platform mapping tools: a distributed system object component (DSOC) object-oriented message passing model and a symmetrical multiprocessing (SMP) model using shared memory. We demonstrate the combined use of the MultiFlex multiprocessor mapping tools, supported by high-speed hardware-assisted messaging, context-switching, and dynamic scheduling using the StepNP demonstrator multiprocessor system-on-chip platform, for two representative applications: 1) an Internet traffic management application running at 2.5 Gb/s and 2) an MPEG4 video encoder (VGA resolution, at 30 frames/s). For these applications, a combination of the DSOC and SMP programming models were used in interoperable fashion. After optimization and mapping, processor utilization rates of 85%-91% were demonstrated for the traffic manager. For the MPEG4 decoder, the average processor utilization was 88%

In this paper, we explore the requirements of emerging complex SoC's and describe StepNP, an experimental flexible, multi-processor SoC platform targeted towards communications and networking applications. We present the results of mapping an internet protocol (IPv4) packet forwarding application, running at 2.5 Gb/s and 10 Gb/s. We demonstrate how the use of high-speed hardware-assisted messaging and dynamic task allocation in the StepNP platform allows us to achieve very high processor utilization rates (up to 97%) in spite of the presence of high network-on-chip and memory access latencies. The inter-processor communication overhead is kept very low, representing only 9% of instructions.

This paper presents a high-level component-based methodology and design environment for application-specific multicore SoC architectures. Component-based design provides primitives to build complex architectures from basic components. This bottom-up approach allows design-architects to explore efficient custom solutions with best performances. This paper presents a high-level component-based methodology and design environment for application-specific multicore SoC architectures. The system specifications are represented as a virtual architecture described in a SystemC-like model and annotated with a set of configuration parameters. Our component-based design environment provides automatic wrapper-generation tools able to synthesize hardware interfaces, device drivers, and operating systems that implement a high-level interconnect API. This approach, experimented over a VDSL system, shows a drastic design time reduction without any significant efficiency loss in the final circuit.

We present a design flow for the generation of application-specific multiprocessor architectures. In the flow, architectural parameters are first extracted from a high-level system specification. Parameters are used to instantiate architectural components, such as processors, memory modules and communication networks. The flow includes the automatic generation of communication coprocessor that adapts the processor to the communication network in an application-specific way. Experiments with two system examples show the effectiveness of the presented design flow.

In this paper, we present a novel approach for the design of application specific multiprocessor systems-on chip. Our approach is based on a generic architecture model which is used as a template throughout the design process. The key characteristics of this model are its great modularity, flexibility and scalability which make it reusable for a large class of applications. In addition, it allows one accelerate the design cycle. This paper focuses on the definition of the architecture model and the systematic design flow that can be automated. The feasibility and effectiveness of this approach are illustrated by two significant demonstration examples.