Diversity has been regarded as a desirable property of redundant instances, since it allows circuits to behave differently in front of a given fault. However, while qualitatively diversity is a well-understood concept, usable efficient metrics do not exist to quantify diversity in the context of safety-related systems. In this paper we cover this gap by proposing DIMP, a low-cost diversity metric based on analyzing the paths of the redundant circuits. We relate it to the particular case of automotive microcontrollers implementing lockstep cores and show that it can be successfully used providing relevant information for addressing common cause faults.

The growing variability in nanoelectronic devices, due to uncertainties from the manufacturing process and environmental conditions (power supply, temperature, aging), requires increasing design guardbands, forcing circuits to work with conservative clock frequencies. Various schemes for clock generation based on ring oscillators and adaptive clocks have been proposed with the goal to mitigate the power and performance losses attributable to variability. However, there has been no systematic analysis to quantify the benefits of such schemes and no sign-off method has been proposed for timing correctness. This paper presents and analyzes a Reactive Clocking scheme with Variability-Tracking Jitter (RClk) that uses variability as an opportunity to reduce power by continuously adjusting the clock frequency to the varying environmental conditions, and thus, reduces guardband margins significantly. Power can be reduced between 20% and 40% at iso-performance and performance can be boosted by similar amounts at iso-power. Additionally, energy savings can be translated to substantial advantages in terms of reliability and thermal management. More importantly, the technology can be adopted with minimal modifications to conventional EDA flows.

The complexity of the VLSI physical design flow grows dramatically as the level of integration increases. An effective way to manage this increasing complexity is through the use of regular designs which contain more reusable parts. In this work we introduce HiReg, a new floorplanning algorithm that generates regular floorplans. HiReg automatically extracts repeating patterns in a design by using graph mining techniques. Regularity is exploited by reusing the same floorplan for multiple instances of a pattern, as long as neither area, wire length or existing hierarchy constraints are violated or compromised. The proposed scheme is targeted towards early system-level design of chip multiprocessors (CMPs). Experiments show the scalability of the method for many-core CMPs and competitive results in area and wire length.

In application-specific SoCs, the irregularity of the topology ends up in a complex and customized implementation of the routing algorithm, usually relying on routing tables implemented with memory structures at source end nodes. As system size increases, the routing tables also increase in size with nonnegligible impact on power, area, and latency overheads. In this paper, we present a routing implementation for application-specific SoCs able to implement in an efficient manner (with no routing tables and using a small logic block in every switch) a deadlock-free routing algorithm in these irregular networks. The mechanism relies on a tool that maps the initial irregular topology of the SoC system into a logical regular structure where the mechanism can be applied. We provide details for both the mapping tool and the proposed routing mechanism. Evaluation results show the effectiveness of the mapping tool as well as the low area and timing requirements of the mechanism. With the mapping tool and the routing mechanism, complex irregular SoC topologies can now be supported without the need for routing tables.

Networks-on-FPGA consist of a network of switches connected with point-to-point links and can cover sufficiently the communication needs of complex systems implemented on FPGA platforms. The efficient implementation of such networks requires the appropriate tuning of their components to the characteristics of the FPGA's logic and memory resources. In this paper, we present a distributed switch architecture that exploits in the best way the structure of the FPGA and achieves significant area/delay savings when compared to baseline switch architectures; more than 50% increase in operating frequency is achieved for similar area. The proposed switch operates as an elastic pipeline and can be spread throughout the FPGA chip irrespective the topology of the network and without limiting the placement options of the corresponding EDA tools.

Networks-on-Chip (NoC) with low-radix switches forming a simple and planar topology is typically accepted as the right interconnection infrastructure for current Chip Multi Processor and high-end Multi Processor System-on-Chip. This is mainly due to its simplicity in the physical mapping on the chip. However, as the network diameter increases, latency and power consumption are increased due to the rapidly growing queuing delay in each switch do not scale with system size. In this context, topologies with high-radix switches have been recently proposed in the NoC scenario to keep message latency low when interconnecting a large number of devices. However, the use of high-radix switches present several well-known drawbacks, being the most important the scalability in area and frequency when implemented. In addition, average and maximum wire length is increased. In this paper we present a distributed crossbar NoC architecture that reduces network latency, increases network throughput significantly. For the distributed crossbar implementation trees of 2-to-1 multiplexers with arbitration and buffer capabilities are spread over the chip, avoiding the negative impact of a high radix switch degree on NoC operating frequency, and minimizing the impact of long wires. Results show that in a 64-node NoC our most aggressive distributed crossbar configuration reduces flit latency by 42% and increases throughput by 544% with respect to the low latency flattened butterfly architecture, meanwhile area is increased a 110%. A more conservative distributed crossbar configuration obtains an increment in throughput of 276.1%, latency is decreased a 29.7%, but area is also decreased by 7%.

Current integration scales allow designing chip multiprocessors (CMP), where cores are interconnected by means of a network-on-chip (NoC). Unfortunately, the small feature size of current integration scales causes some unpredictability in manufactured devices because of process variation. In NoCs, variability may affect links and routers causing them not to match the parameters established at design time. In this paper, we first analyze the way that manufacturing deviations affect the components of a NoC by applying a new comprehensive and detailed within-die variability model to 200 instances of an 8×8 mesh NoC synthesized using 45 nm technology. Later, we show that GALS-based NoCs present communication bottlenecks under process variation which cannot be avoided by using just device-level solutions but higher level architectural approaches are required. Therefore, to overcome this performance reduction, we draft a novel architectural approach, called performance domains, intended to reduce the negative impact of variability on application execution time. This mechanism is suitable when several applications are simultaneously running in the CMP chip.

We present a novel network on-chip topology, PC-Mesh (Parallel Concentrated Mesh), suitable for tiled CMP systems. The topology is built using four concentrated mesh (C-Mesh) networks and a new network interface able to inject packets through different networks. The goal of the new combined topology is to minimize the power consumption of the network when running applications exhibiting low traffic rates and maximize throughput when applications require high traffic rates. Thus, the topology is dynamically adjusted (switching on and off network components) with a proper injection algorithm, adapting itself to the network on-chip traffic requirements. The PC-Mesh network performs as a C-Mesh network (using one sub network) when the traffic is low obtaining large savings in power consumption. When the load network increases, new sub networks are opened and thus higher traffic rates are supported, thus providing comparable results as the mesh network. Additional benefits of the PC-Mesh network is its fault tolerance degree and the lower latency in terms of hops. An alternative PC-Mesh version is provided to optimize the fault-tolerance degree. Comparative results with detailed evaluations (in area, power, and delay) are provided both for the network interface and switches. Results demonstrate PC-Mesh is able to dynamically adapt to the current traffic situations. Experimental results with a system-level simulation platform (including the application being run and the operating system) are provided. Results show how the PC-Mesh network achieves the same results as the C-Mesh topology reducing execution time of applications by 20% as well as energy consumption by also 20%, when compared with the 2D-Mesh network topology. However, when challenged with higher traffic demands, PC-Mesh outperforms the C-Mesh network by achieving much lower execution time of applications and lower energy consumption. In some scenarios, execution time is reduced by a factor of 2 and power consumption by 50%.

It is well-known that current Chip Multiprocessor (CMP) and high-end MultiProcessor System-on-Chip (MPSoC) designs are growing in their number of components. Networks-on-Chip (NoC) provide the required connectivity for such CMP and MPSoC designs at reasonable costs. However, as technology advances, links become the critical component in the NoC. First, because the power consumption of the link is extremely high with respect the power consumption of the rest of components (mainly switches), becoming unacceptable for long global interconnects. Second, the delay of a link does not scale with technology, thus, degrading the performance of the network. To solve both problems, several solutions have been previously proposed. In this paper, we present a new switch architecture that reduces the negative impact of links on the NoC. We call our proposal distributed switch. The distributed switch moves the circuitry of a standard switch onto the links. Then, packets are buffered, routed, and forwarded at the same time they are crossing the link. Distributing a standard switch onto the link improves the trade off between the power consumption and the operating frequency of the entire network. In contrast, area requirements are increased. The distributed switch reduces up to 14.8% the peak power consumption while increases its area up to 22%. Furthermore, the distributed switch is able to increase the maximum achievable frequency with respect to the standard switch. In particular, the maximum operating frequency of the distributed switch can be increased up to 14.3%.

The high-performance computing domain is enriching with the inclusion of networks-on-chip (NoCs) as a key component of many-core (CMPs or MPSoCs) architectures. NoCs face the communication scalability challenge while meeting tight power, area, and latency constraints. Designers must address new challenges that were not present before. Defective components, the enhancement of application-level parallelism, or power-aware techniques may break topology regularity, thus, efficient routing becomes a challenge. This paper presents universal logic-based distributed routing (uLBDR), an efficient logic-based mechanism that adapts to any irregular topology derived from 2-D meshes, instead of using routing tables. uLBDR requires a small set of configuration bits, thus being more practical than large routing tables implemented in memories. Several implementations of uLBDR are presented highlighting the tradeoff between routing cost and coverage. The alternatives span from the previously proposed LBDR approach (with 30% of coverage) to the uLBDR mechanism achieving full coverage. This comes with a small performance cost, thus exhibiting the tradeoff between fault tolerance and performance. Power consumption, area, and delay estimates are also provided highlighting the efficiency of the mechanism. To do this, different router models (one for CMPs and one for MPSoCs) have been designed as a proof concept.

As technology advances, the number of cores in Chip Multi Processor systems (CMPs) and Multi Processor Systems-on-Chips (MPSoCs) keeps increasing. Current test chips and products reach tens of cores, and it is expected to reach hundreds of cores in the near future. Such complexity demands for an efficient network-on-chip (NoC). The common choice to build such networks is the 2D mesh topology (as it matches the regular tile-based design) and the Dimension-Order Routing (DOR) algorithm (because its simplicity). The network in such systems must provide sustained throughput and ultra low latencies. One of the key components in the network is the router, and thus, it plays a major role when designing for such performance levels. In this paper we propose a new pipelined router design focused in reducing the router latency. As a first step we identify the router components that take most of the critical path, and thus limit the router frequency. In particular, the arbiter is the one limiting the performance of the router. Based on this fact, we simplify the arbiter logic by using multiple smaller arbiters. The initial set of requests in the initial arbiter is then distributed over the smaller arbiters that operate in parallel. With this design procedure, and with a proper internal router organization, different router architectures are evolved. All of them enable the use of smaller arbiters in parallel by replicating ports and assuming the use of the DOR algorithm. The net result of such changes is a faster router. Preliminary results demonstrate a router latency reduction ranging from 10% to 21% with an increase of the router area. Network latency is reduced in a range from 11% to 15%.

On-chip networks have rapidly emerged as the best interconnection choice for high-core count chip multiprocessors (CMPs) because of the good scalability properties they present. Their fast evolution has been accelerated by the large inheritance from the offchip network domain. Many of the mechanisms and techniques previously developed in that area have been directly applied to the on-chip domain due to the perfect match between the features provided by those techniques and the requirements of on-chip networks. Other mechanisms have been adapted in order to fit the new environment needs. In this paper we present a new example of such an adaptation. Although wormhole switching was initially chosen as the switching mechanism that best fits the on-chip domain characteristics because of its well-known low input buffer requirements, in this paper we show that an efficient implementation of virtual cut-through switching, specially adapted to the particular characteristics of the CMP domain, is feasible as well. Our implementation of virtual cut-through switching, carried out in a 45nm technology, demonstrates to be faster than a wormhole one, at the same time that does not require more area and reduces power consumption.

Current integration scales allow designing chip multiprocessors (CMP) where cores are interconnected by means of a network-on-chip (NoC). Unfortunately, the small feature size of current integration scales cause some unpredictability in manufactured devices because of process variation. In NoCs,variability may affect links and routers causing that they do not match the parameters established at design time. In this paper we first analyze the way that manufacturing deviations affect the components of a NoC by applying a comprehensive and detailed variability model to 200 instances of an 8x8 mesh NoC synthesized using 45nm technology. A second contribution of this paper is showing that GALS-based NoCs present communication bottlenecks under process variation. To overcome this performance reduction we draft a novel approach, called performance domains, intended to reduce the negative impact of variability on application execution time. This mechanism is suitable when several applications are simultaneously running in the CMP chip.

The high-performance computing domain is enriching with the inclusion of Networks-on-chip (NoCs) as a key component of many-core (CMPs or MPSoCs) architectures. NoCs face the communication scalability challenge while meeting tight power, area and latency constraints. Designers must address new challenges that were not present before. Defective components, the enhancement of application-level parallelism or power-aware techniques may break topology regularity, thus, efficient routing becomes a challenge.In this paper, uLBDR (Universal Logic-Based Distributed Routing) is proposed as an efficient logic-based mechanism that adapts to any irregular topology derived from 2D meshes, being an alternative to the use of routing tables (either at routers or at end-nodes). uLBDR requires a small set of configuration bits, thus being more practical than large routing tables implemented in memories. Several implementations of uLBDR are presented highlighting the trade-off between routing cost and coverage. The alternatives span from the previously proposed LBDR approach (with 30\% of coverage) to the uLBDR mechanism achieving full coverage. This comes with a small performance cost, thus exhibiting the trade-off between fault tolerance and performance.