Many robotic tasks require fast and accurate force sensing capabilities to ensure adaptive behavior execution. While dedicated force-torque (FT) sensors are a common option, such devices induce extra costs, need additional power supply, and add weight to otherwise light-weight robotic systems. This paper presents a machine learning approach for estimating external forces acting on a robot based on common internal sensors only. In the training phase, a behavior-specific proprioceptive model is learned as compact representation of the expected proprioceptive feedback during task execution. First, the proprioceptive sensors relevant for the given behavior are identified using information-theoretic measures. Then, the proprioceptive model is learned using deep learning techniques. During behavior execution, the proprioceptive model is applied to actual sensor readings for estimation of external forces. Experiments performed with the UR5 robot demonstrate the ability for fast and accurate force estimation even in situations where a dedicated commercial FT sensor is not applicable.

Computational agents often need to learn policies that involve many control variables, e.g., a robot needs to control several joints simultaneously. Learning a policy with a high number of parameters, however, usually requires a large number of training samples. We introduce a reinforcement learning method for sample-efficient policy search that exploits correlations between control variables. Such correlations are particularly frequent in motor skill learning tasks. The introduced method uses Variational Inference to estimate policy parameters, while at the same time uncovering a low-dimensional latent space of controls. Prior knowledge about the task and the structure of the learning agent can be provided by specifying groups of potentially correlated parameters. This information is then used to impose sparsity constraints on the mapping between the high-dimensional space of controls and a lower-dimensional latent space. In experiments with a simulated bi-manual manipulator, the new approach effectively identifies synergies between joints, performs efficient low-dimensional policy search, and outperforms state-of-the-art policy search methods.

Robotic manipulation tasks often require the control of forces and torques exerted on external objects. This paper presents a machine learning approach for estimating forces when no force sensors are present on the robot platform. In the training phase, the robot executes the desired manipulation tasks under controlled conditions with systematically varied parameter sets. All internal sensor data, in the presented case from more than 100 sensors, as well as the force exerted by the robot are recorded. Using Transfer Entropy, a statistical model is learned that identifies the subset of sensors relevant for torque estimation in the given task. At runtime, the model is used to accurately estimate the torques exerted during manipulations of the demonstrated kind. The feasibility of the approach is shown in a setting where a robotic manipulator operates a torque wrench to fasten a screw nut. Torque estimates with an accuracy of well below ±1Nm are achieved. A strength of the presented model is that no prior knowledge of the robot's kinematics, mass distribution or sensor instrumentation is required.

In order to ensure safe operation, robots must be able to reliably detect behavior perturbations that result from unexpected physical interactions with their environment and human co-workers. While some robots provide firmware force sensors that generate rough force estimates, more accurate force measurements are usually achieved with dedicated force-torque sensors. However, such sensors are often heavy, expensive and require an additional power supply. In the case of lightweight manipulators, the already limited payload capabilities may be reduced in a significant way. This paper presents an experience-based approach for accurately estimating external forces being applied to a robot without the need for a force-torque sensor. Using Information Transfer, a subset of sensors relevant to the executed behavior are identified from a larger set of internal sensors. Models mapping robot sensor data to force-torque measurements are learned using a neural network. These models can be used to predict the magnitude and direction of perturbations from affordable, proprioceptive sensors only. Experiments with a UR5 robot show that our method yields force estimates with accuracy comparable to a dedicated force-torque sensor. Moreover, our method yields a substantial improvement in accuracy over force-torque values provided by the robot firmware.

Learning motor skills for robots is a hard task. In particular, a high number of degrees-of-freedom in the robot can pose serious challenges to existing reinforcement learning methods, since it leads to a high-dimensional search space. However, complex robots are often intrinsically redundant systems and, therefore, can be controlled using a latent manifold of much smaller dimensionality. In this paper, we present a novel policy search method that performs efficient reinforcement learning by uncovering the low-dimensional latent space of actuator redundancies. In contrast to previous attempts at combining reinforcement learning and dimensionality reduction, our approach does not perform dimensionality reduction as a preprocessing step but naturally combines it with policy search. Our evaluations show that the new approach outperforms existing algorithms for learning motor skills with high-dimensional robots.

In many settings, e.g. physical human-robot interaction, robotic behavior must be made robust against more or less spontaneous application of external forces. Typically, this problem is tackled by means of special purpose force sensors which are, however, not available on many robotic platforms. In contrast, we propose a machine learning approach suitable for more common, although often noisy sensors. This machine learning approach makes use of Dynamic Mode Decomposition (DMD) which is able to extract the dynamics of a nonlinear system. It is therefore well suited to separate noise from regular oscillations in sensor readings during cyclic robot movements under different behavior configurations. We demonstrate the feasibility of our approach with an example where physical forces are exerted on a humanoid robot during walking. In a training phase, a snapshot based DMD model for behavior specific parameter configurations is learned. During task execution the robot must detect and estimate the external forces exerted by a human interaction partner. We compare the DMD-based approach to other interpolation schemes and show that the former outperforms the latter particularly in the presence of sensor noise. We conclude that DMD which has so far been mostly used in other fields of science, particularly fluid mechanics, is also a highly promising method for robotics.

In this paper we present a new approach for learning responsive robot behavior by imitation of human interaction partners. Extending previous work on robot imitation learning, that has so far mostly concentrated on learning from demonstrations by a single actor, we simultaneously record the movements of two humans engaged in on-going interaction tasks and learn compact models of the interaction. Extracted interaction models can thereafter be used by a robot to engage in a similar interaction with a human partner. We present two algorithms for deriving interaction models from motion capture data as well as experimental results on a humanoid robot.