Industrial robots are important when the degree of automation in industry is increased. To enable the use of robots also when the products change rapidly, the programming must be quick and easy to perform. One way to accomplish this is to use lead-through programming, i.e., the user manually guides the robot. This paper presents a sensorless approach, and thus avoids the need for a typically expensive sensor. The method is based on disabling low-level joint controllers combined with gravity compensation. It is reported how the performance can be improved by compensating for friction. Further, a method for detecting small external torques is described, based on the use of the low-level joint controllers with increased integral gain. The lead-through programming is experimentally evaluated using two different industrial robots.

“In-hand manipulation” is the ability to reposition an object in the hand, for example when adjusting the grasp of a hammer before hammering a nail. The common approach to in-hand manipulation with robotic hands, known as dexterous manipulation [1], is to hold an object within the fingertips of the hand and wiggle the fingers, or walk them along the object's surface. Dexterous manipulation, however, is just one of the many techniques available to the robot. The robot can also roll the object in the hand by using gravity, or adjust the object's pose by pressing it against a surface, or if fast enough, it can even toss the object in the air and catch it in a different pose. All these techniques have one thing in common: they rely on resources extrinsic to the hand, either gravity, external contacts or dynamic arm motions. We refer to them as “extrinsic dexterity”. In this paper we study extrinsic dexterity in the context of regrasp operations, for example when switching from a power to a precision grasp, and we demonstrate that even simple grippers are capable of ample in-hand manipulation. We develop twelve regrasp actions, all open-loop and hand-scripted, and evaluate their effectiveness with over 1200 trials of regrasps and sequences of regrasps, for three different objects (see video [2]). The long-term goal of this work is to develop a general repertoire of these behaviors, and to understand how such a repertoire might eventually constitute a general-purpose in-hand manipulation capability.

This video presents the application of Extrinsic Dexterity to change the pose of an object in the hand, i.e., to regrasp the object.

One well acknowledged drawback of traditional parallel kinematic machines (PKMs) is that the ratio of accessible workspace to robot footprint is small for these structures. This is most likely a contributing reason why relatively few PKMs are used in industry today. The SCARA-Tau structure is a parallel robot concept designed with the explicit goal of overcoming this limitation and developing a PKM with a workspace similar to that of a serial type robot of the same size. This paper shows for the first time how a proposed variant of the SCARA-Tau PKM can improve the usability of this robot concept further by significantly reducing the dependence between tool platform position and orientation of the original concept. The inverse kinematics of the proposed variant is derived and a comparison is made between this structure and the original SCARA-Tau concept, both with respect to platform orientation changes and workspace.