Irregular quasi-cyclic (QC) low-density parity-check (LDPC) codes with the block dual-diagonal (BDD) parity structure are widely adopted in many communication standards because the BDD structure supports an efficient encoding and many degree-2 variable nodes inside are adequate for the construction of mid- to high-rate codes. However, we observe that low-rate irregular QC LDPC codes with the BDD parity structure inherently contain too many degree-2 variable nodes and suffer from error floors in high signal-to-noise ratio (SNR) region. In this paper, a generalized BDD structure including double-weight circulants as well as circulant permutation matrices is proposed for low-rate irregular QC LDPC codes with low error floors which is achieved with a little bit giving up error performance in the waterfall region. When constructing the parity part of a code with the generalized BDD structure, the portion of double-weight circulants is variable so that the resulting LDPC code can achieve a desired degree distribution including degrees 2 and 3 while supporting the efficient encoding. We show that low-rate QC LDPC codes constructed with the proposed BDD structure have better theoretical properties and lower error floor than those with the conventional BDD structure.

In this paper, a new class of (N, K) near-optimal partial Hadamard codebooks is proposed. The construction of the proposed codebooks from Hadamard matrices is based on binary row selection sequences, which are generated by quadratic have parameters N = pnand K = (p - 1/2 p)(N + √N) + 1 for an odd prime p and an even positive integer n. We prove that the maximum magnitude of inner products between the code vectors of the proposed codebooks asymptotically achieves the Welch bound equality for sufficiently large p and derive their inner product distribution.

For a high-rate case, it is difficult to randomly construct good low-density parity-check (LDPC) codes of short and moderate lengths because their Tanner graphs are prone to have short cycles. Also, the existing high-rate quasi-cyclic (QC) LDPC codes can be constructed only for very restricted code parameters. In this paper, based on special classes of cyclic difference families, we propose a new construction method of high-rate regular QC LDPC codes having parity-check matrices consisting of a single row of circulants with column-weight 3 or 4. The proposed QC LDPC codes can be constructed for various code rates and lengths including the minimum achievable length for given column-weight and design rate under girth 6. It is observed that the parity-check matrices of the proposed QC LDPC codes have full rank for column-weight 3 and just one redundant row for column-weight 4. It is shown that the error correcting performance of the proposed QC LDPC codes of short and moderate lengths is almost the same as that of the existing ones through numerical analysis.

There have been lots of efforts on the construction of quasi-cyclic (QC) low-density parity-check (LDPC) codes with large girth. However, most of them focus on protographs with single edges and little research has been done for the construction of QC LDPC codes lifted from protographs with multiple (i.e., parallel) edges. Compared to single-edge protographs, multiple-edge protographs have benefits such that QC LDPC codes lifted from them can potentially have larger minimum Hamming distance. In this paper, all subgraph patterns of multiple-edge protographs, which prevent QC LDPC codes from having large girth by inducing inevitable cycles, are fully investigated based on a graph-theoretic approach. By using combinatorial designs, a systematic construction method of multiple-edge protographs is proposed for regular QC LDPC codes with girth at least 12 and another method is proposed for regular QC LDPC codes with girth at least 14. Moreover, a construction algorithm of QC LDPC codes based on certain liftings of multiple-edge protographs is proposed and it is shown that the resulting QC LDPC codes have larger upper bounds on the minimum Hamming distance than those lifted from single-edge protographs. Simulation results are provided to compare the performance of the proposed QC LDPC codes with progressive edge-growth (PEG) LDPC codes and with PEG QC LDPC codes.

The block dual-diagonal (BDD) parity structure is widely adopted in many practical irregular quasi-cyclic (QC) low-density parity-check (LDPC) codes. These QC LDPC codes have good error-correcting performance in waterfall region but usually show relatively high error floors in low error rate region. In this paper, by using multi-weight circulants, a new BDD structure is proposed for the parity part of irregular QC LDPC codes to lower error floors and support efficient encoding. Since the parity part of parity-check matrices has flexible degree distribution with the aid of multi-weight circulants, QC LDPC codes with the proposed BDD structure can have large minimum Hamming distance compared to those with the conventional BDD structure, especially, in the low-rate case. Simulation results show that QC LDPC codes with the proposed BDD structure have lower error floor than those with the conventional BDD structure.

In this letter, a new performance measure for compressed sensing matrices is proposed. This new measure is based on thek-set correlation vectors whose components consist of the correlation values between two columns in thek-column submatrices of a sensing matrix. This measure is highly related to the restricted isometry property (RIP). And the proposed measure has less computational complexity than the condition number approach which is a typical approach for performance prediction with RIP check. It is shown by simulation that the proposed scheme works well as a performance measure for the compressed sensing matrices.

In this paper, all subgraph patterns of protographs which prevent quasi-cyclic (QC) low-density parity-check (LDPC) codes from having large girth are searched in allowance with multiple edges based on graph theoretic approach. A systematic construction of protographs with multiple edges using combinatorial design is proposed for designing QC LDPC codes with girth greater than or equal to 14.