This document presents the design of a 6-degree of freedom fiberoptic force-torque-sensor for integration in instruments for minimally invasive robotic surgery. The measuring system based on fiber Bragg gratings as well as the calibration procedure are explained. Measurement properties of the sensor are verified in a test setup.

Robotic surgery systems are highly complex and expensive pieces of equipment. Demands for lower cost of care can be met if these systems are employable in a flexible manner for a large variety of procedures. To protect the initial investment the capabilities of a robotic system need to be expandable as new tasks arise. To oblige the needs of future robotic support in hospitals, the German Aerospace Center (DLR) has developed the versatile robotic system MiroSurge for medical applications. This paper presents a 3 DoF instrument for Minimally Invasive Robotic Surgery which is mounted to the hollow wrist of the DLR MIRO robot arm. The MICA instrument consists of a versatile drive train and a detachable task specific tool with its tool interface, shaft, 2 DoF wrist, 7 DoF force/torque sensor and the actuated functional end. With the current cable-driven tool, gripping and manipulation forces of above 10 N are feasible and dynamics is high enough for surgery at the beating heart.

This video presents the in-house developed DLR MiroSurge robotic system for surgery. As shown, the system is suitable for both minimally invasive and open surgery. Essential part of the system is the MIRO robot: The soft robotics feature enables intuitive interaction with the robot.

Minimally invasive surgery (MIS) challenges the surgeon’s skills due to his separation from the operation area which can only be reached with long instruments. To overcome these drawbacks, minimally invasive robotic surgery (MIRS) plays an important role. This paper describes the development of actuated and sensorized instruments for minimally invasive robotic surgery which help to increase the surgeon’s immersion and dexterity.