This article investigates the adaptive neural tracking control problem for a class of hyperbolic PDE with boundary actuator dynamics described by a set of nonlinear ordinary differential equations (ODEs). Particularly, the control input appears in the ODE subsystem with unknown nonlinearities requiring to be estimated and compensated, which makes the control task rather difficult. It is the first time to consider tracking control of such a class of systems, rendering our contributions essentially different from the existing literature that merely focus on the stabilization problem. By formulating a virtual exosystem to generate a reference trajectory, we propose a novel design of the adaptive geometric controller for the considered system where neural networks (NNs) are employed to approximately estimate nonlinearities, and finite and infinite-dimensional backstepping techniques are leveraged. Moreover, rigorously theoretical proofs based on the Lyapunov theory are provided to analyze the stability of the closed-loop system. Finally, we illustrate the results through two numerical simulations.

Assisted by the Takagi-Sugeno (T-S) fuzzy modelbased nonlinear control technique, nonlinear spatiotemporal feedback compensators are proposed in this article for exponential stabilization of parabolic partial differential dynamic systems with measurement outputs transmitted over a communication network. More specifically, an approximate T-S fuzzy partial differential equation (PDE) model with C ∞-smooth membership functions is constructed to describe the complex spatiotemporal dynamics of the nonlinear partial differential systems, and its approximation capability is analyzed via the uniform approximation theorem on a real separable Hilbert space. A spatiotemporally asynchronous sampled-data measurement output equation is proposed to model the transmission process of networked measurement outputs. By the approximate T-S fuzzy PDE model, fuzzy-observer-based nonlinear continuous-time and sampleddata feedback compensators are constructed via the spatiotemporally asynchronous sampled-data measurement outputs. Given that sufficient conditions presented in terms of linear matrix inequalities are satisfied, the suggested fuzzy compensators can exponentially stabilize the nonlinear system in the Lyapunov sense. Simulation results are presented to show the effectiveness and merit of the suggested spatiotemporal fuzzy compensators.

This article develops a robust adaptive boundary output regulation approach for a class of complex anticollocated hyperbolic partial differential equations subjected to multiplicative unknown faults in both the boundary sensor and actuator. The regulator design is based on the internal model principle, which amounts to stabilize a coupled cascade system, which consists of a finite-dimensional internal model driven by a hyperbolic distributed parameter system (DPS). To this end, a systematic sliding mode equipped with a backstepping approach is developed such that the robust state feedback control can be realized. Moreover, since the available information is a faulty boundary measurement at the right side point, state estimation is required. However, due to the presence of boundary unknown faults, we need to solve an issue of joint fault-state estimation. Restrictive persistent excitation conditions are usually required to guarantee the exact estimation of faults but are unrealistic in practice. To this end, a novel concurrent learning (CL) adaptive observer is proposed so that exponential convergence is obtained. It is the first time that the spirit of CL is introduced to the field of DPSs. Consequently, the observer-based adaptive boundary fault tolerant control scheme is developed, and rigorous theoretical analysis is given such that the exponential output regulation can be achieved. Finally, the effectiveness of the proposed methodology is demonstrated via comparative simulations.

The problem of fault estimation is addressed for one-dimensional (1-D) linear boundary control and boundary observation (BCBO) parabolic partial differential equations (PDEs) with a faulty boundary measurement. The considered plant is subjected to simultaneous unknown multiplicative faults entering the boundary input and boundary measurement. Difficulties arise due to the coupling between the sensor fault parameter and unknown boundary state appearing in the measurement. With the only boundary input and faulty boundary measurement, it is rather challenging to estimate the accurate values of faults and state simultaneously. Therefore, most existing results only consider correct and healthy measurement for PDE systems. To this end, novel adaptation laws and an adaptive observer are designed in this work to provide exponential convergent joint fault-state estimation, where we design and leverage a set of novel filters. It is first time that unknown multiplicative fault parameter in the measurement can be estimated accurately in the PDE systems.

Joint uncertainties and state estimation of a class of linear coupled hyperbolic partial differential equation systems in the presence of unstructured and structured uncertainties are studied in this paper. For unstructured uncertainties which are completely unknown, by employing Takagi-Sugeno fuzzy logic system to approximate the unstructured uncertainties, a novel adaptive fuzzy boundary observer is developed to estimate both unknown system states as well as unknown weights in the fuzzy logic system, and the estimation errors are ultimately bounded. Therein, in the design of the proposed observer, a set of swapping filters and infinite dimensional backstepping technique are combined. On the other hand, for structured uncertainties that can be described in a concrete parameterized form, the proposed method can easily achieve the exact estimation of weights and states to their true values. The rigorous proof is provided to show that the ultimately bounded estimation errors for the case of unstructured uncertainties and the exponential convergent estimation errors for the case of structured uncertainties can be realized. Finally, three illustrative simulations are carried out to show the feasibility and effectiveness of the developed methods in this paper.

Data-driven methods have been extensively utilized in establishing predictive models from historical data for process monitoring and prediction of quality variables. However, most data-driven approaches assume that training data and testing data come from steady-state operating regions and follow the same distribution, which may not be the case when it comes to complex industrial processes. To avoid these restrictive assumptions and account for practical implementation, a novel online transfer learning technique is proposed to dynamically learn cross-domain features based on the variational Bayesian inference in this work. Stemming from the probabilistic slow feature analysis, a transfer slow feature analysis (TSFA) technique is presented to transfer dynamic models learned from different source processes to enhance prediction performance in the target process. In particular, two weighting functions associated with transition and emission equations are introduced and updated dynamically to quantify the transferability from source domains to the target domain at each time instant. Instead of point estimation, a variational Bayesian inference scheme is designed to learn the parameters under probability distributions accounting for corresponding uncertainties. The effectiveness of the proposed technique with applications to soft sensor modelling is demonstrated by a simulation example, a public dataset and an industrial case study.