Space division multiplexing increases the capacity of mobile cells by reusing the frequencies in various directions. Yet, today's concepts scale badly to millimeter wave and therefore cannot provide Tb/s capacity. In this paper, we introduce time-to-space division multiplexing as a novel scheme to steer multiple beams simultaneously to different users. The main benefit of the proposed method relies in the fact that simple hardware can be used to generate the beams. In other words, it provides the advantages of space division multiplexing without relying on the complex array feeders that are usually required. Thanks to this advantage, the proposed technique can be easily combined with millimeter Wave systems as recently demonstrated.

Complementing plasmonic slot waveguides with highly nonlinear organic materials has rendered a new generation of ultracompact active nanophotonic components that are redefining the state of the art. In this paper, we review the fundamentals of this so-called plasmonic- organic-hybrid (POH) platform. Starting from simple phase shifters to the most compact IQ modulators, we introduce key devices of high-speed data communications. For instance, all-plasmonic Mach-Zehnder modulators (MZMs) are reviewed and long-term prospects are discussed. This kind of modulator already features unique properties such as a small footprint (2), a large electro-optic bandwidth (> 110 GHz), a small energy consumption (~25 fJ/b), a large extinction ratio (> 25 dB) in combination with a record small voltage-length product of 40 Vμm. Finally, as an example for seamless integration we introduce novel plasmonic IQ modulators. With such modulators we show the generation of advanced modulation formats (QPSK, 16-QAM) on footprints as small as 10 μm × 75 μm. This demonstration ultimately shows how plasmonics can be used to control both phase and amplitude of an optical carrier on the microscale with reasonably low losses.

In this paper we present an optically powered and motorized video camera system. Energy for the camera sensor is supplied by a glass fiber carrying 800 mW of optical power, which the sensor converts back to 320 mW of electrical power. The specific advantage of this arrangement is galvanic isolation and a very high robustness with respect to electromagnetic interference. We demonstrate that sufficient energy can be transmitted for driving an Actel Igloo FPGA, which performs the necessary signal processing. Additionally, with the help of capacitive energy storage, some small actuators can be supplied which move the camera sensor head. The base station of the system, based on a Xilinx Virtex-5 FPGA, holds a LEON-3 based system-on-chip encoding the incoming VGA video stream into Motion-JPEG formatted data in realtime, which may be directly sent to the internet using an Ethernet interface. The prototype has numerous fields of application where it performs much better than stateof-the-art solutions. Most prominent examples are visual sensors in high voltage areas as well as medical endoscopes.

A cost-effective route to build electrically as well as optically controlled modulators in silicon photonics is reviewed. The technology enables modulation at bit rates beyond 100 Gbit/s. This platform relies on the well-established silicon-based complementary metal-oxide-semiconductor processing technology for fabricating silicon-on-insulator (SOI) waveguides, while an organic cladding layer adds the required nonlinearity. The strength of this hybrid technology is discussed, and two key devices in communications are exemplarily regarded in more detail. The first device demonstrates demultiplexing of a 120 Gbit/s signal by means of four-wave mixing in a slot-waveguide that has been filled with a highly nonlinear chi(3)-organic material. The second device is a 100 Gbit/s/1 V electrooptic modulator based on a slow-light SOI photonic crystal covered with a chi(2)-nonlinear organic material.