Multi-robot coordination is crucial for autonomous systems, yet real-world deployments often encounter various failures. These include both temporary and permanent disruptions in sensing and communication, which can significantly degrade system robustness and performance if not explicitly modeled. Despite its practical importance, failure-aware coordination remains underexplored in the literature. To bridge the gap between idealized conditions and the complexities of real-world environments, we propose a unified failure-aware coordination framework designed to enable resilient and adaptive multi-robot target tracking under both temporary and permanent failure conditions. Our approach systematically distinguishes between two classes of failures: (1) probabilistic and temporary disruptions, where robots recover from intermittent sensing or communication losses by dynamically adapting paths and avoiding inferred danger zones, and (2) permanent failures, where robots lose sensing or communication capabilities irreversibly, requiring sustained, decentralized behavioral adaptation. To handle these scenarios, the robot team is partitioned into subgroups. Robots that remain connected form a communication group and collaboratively plan using partially centralized nonlinear optimization. Robots experiencing permanent disconnection or failure continue to operate independently through decentralized or individual optimization, allowing them to contribute to the task within their local context. We extensively evaluate our method across a range of benchmark variations and conduct a comprehensive assessment under diverse real-world failure scenarios. Results show that our framework consistently achieves robust performance in realistic environments with unknown danger zones, offering a practical and generalizable solution for the multi-robot systems community.

We demonstrate the capabilities of an attentionbased end-to-end approach for high-speed vision-based quadrotor obstacle avoidance in dense, cluttered environments, with comparison to various state-of-the-art learning architectures. Quadrotor unmanned aerial vehicles (UAVs) have tremendous maneuverability when flown fast; however, as flight speed increases, traditional model-based approaches to navigation via independent perception, mapping, planning, and control modules breaks down due to increased sensor noise, compounding errors, and increased processing latency. Thus, learning-based, end-to-end vision-to-control networks have shown to have great potential for online control of these fast robots through cluttered environments. We train and compare convolutional, U-Net, and recurrent architectures against vision transformer (ViT) models for depth image-to-control in high-fidelity simulation, observing that ViT models are more effective than others as quadrotor speeds increase and in generalization to unseen environments, while the addition of recurrence further improves performance while reducing quadrotor energy cost across all tested flight speeds. We assess performance at speeds of up to 7m/s in simulation and hardware. To the best of our knowledge, this is the first work to utilize vision transformers for end-to-end vision-based quadrotor control.

Trajectory generation in dynamic environments presents a significant challenge for quadrotors, particularly due to the non-convexity in the spatial-temporal domain. Many existing methods either assume simplified static environments or struggle to produce optimal solutions in real-time. In this work, we propose an efficient safe interval motion planning framework for navigation in dynamic environments. A safe interval refers to a time window during which a specific configuration is safe. Our approach addresses trajectory generation through a two-stage process: a front-end graph search step followed by a back-end gradient-based optimization. We ensure completeness and optimality by constructing a dynamic connected visibility graph and incorporating low-order dynamic bounds within safe intervals and temporal corridors. To avoid local minima, we propose a Uniform Temporal Visibility Deformation (UTVD) for the complete evaluation of spatial-temporal topological equivalence. We represent trajectories with B-Spline curves and apply gradient-based optimization to navigate around static and moving obstacles within spatial-temporal corridors. Through simulation and real-world experiments, we show that our method can achieve a success rate of over$\mathbf{9 5 \%}$in environments with different density levels, exceeding the performance of other approaches, demonstrating its potential for practical deployment in highly dynamic environments.

Multi-robot collaboration for target tracking in adversarial environments poses significant challenges, including system failures, dynamic priority shifts, and other unpredictable factors. These challenges become even more pronounced when the environment is unknown. In this paper, we propose a resilient coordination framework for multi-robot, multi-target tracking in environments with unknown sensing and communication danger zones. We consider scenarios where failures caused by these danger zones are probabilistic and temporary, allowing robots to escape from danger zones to minimize the risk of future failures. We formulate this problem as a nonlinear optimization with soft chance constraints, enabling real-time adjustments to robot behaviors based on varying types of dangers and failures. This approach dynamically balances target tracking performance and resilience, adapting to evolving sensing and communication conditions in real-time. To validate the effectiveness of the proposed method, we assess its performance across various tracking scenarios, benchmark it against methods without resilient adaptation and collaboration, and conduct several real-world experiments.

Motion planning techniques for quadrotors have advanced significantly over the past decade. Most successful planners have two stages: a front-end that determines a path that incorporates geometric (or kinematic or input) constraints and specifies the homotopy class of the trajectory, and a back-end that optimizes this path to respect dynamics and input constraints. While there are many different choices for each stage, the eventual performance depends critically not only on these choices, but also on the environment. Given a new environment, it is difficult to decide a priori how one should design a motion planner. In this work, we develop (i) a procedure to construct parametrized environments, (ii) metrics that characterize the difficulty of motion planning in these environments, and (iii) an open-source software stack that can be used to combine a wide variety of two-stage planners seamlessly. We perform experiments in simulations and a real platform. We find, somewhat conveniently, that geometric front-ends are sufficient for environments with varying complexities if combined with dynamics-aware backends. The metrics we designed faithfully capture the planning difficulty in a given environment. All code is available at https://github.com/KumarRobotics/kr_mp_design.

Trajectory generation for quadrotors with limited field-of-view sensors has numerous applications such as aerial exploration, coverage, inspection, videography, and target tracking. Most previous works simplify the task of optimizing yaw trajectories by either aligning the heading of the robot with its velocity, or potentially restricting the feasible space of candidate trajectories by using a limited yaw domain to circumvent angular singularities. In this paper, we propose a novel global yaw parameterization method for trajectory optimization that allows a 360-degree yaw variation as demanded by the underlying algorithm. This approach effectively bypasses inherent singularities by including supplementary quadratic constraints and transforming the final decision variables into the desired state representation. This method significantly reduces the needed control effort, and improves optimization feasibility. Furthermore, we apply the method to several examples of different applications that require jointly optimizing over both the yaw and position trajectories. Ultimately, we present a comprehensive numerical analysis and evaluation of our proposed method in both simulation and real-world experiments.

As a fundamental component of autonomous driving systems, motion planning has garnered significant attention from both academia and industry. This paper focuses on efficient and spatial-temporal optimal trajectory optimization in unstructured environments using compact convex approximations of vehicle shapes. Conventional approaches typically model the task as an optimal control problem by discretizing the motion process in state configuration space. However, this often results in a tradeoff between optimality and efficiency since generating high-quality motion trajectories often requires high-precision discretization of the dynamic process, which imposes a substantial computational burden. To address this issue, we leverage the differential flatness property of car-like robots to simplify the trajectory representation and analytically formulate the spatial-temporal joint optimization problem with flat outputs in a compact manner, while ensuring the feasibility of nonholonomic dynamics. Moreover, we achieve efficient obstacle avoidance with a collision-free driving corridor for unmodelled obstacles and signed distance approximations for dynamic moving objects. We present comprehensive benchmarks with State-of-the-Art methods, demonstrating the significance of the proposed method in terms of efficiency and trajectory quality. Real-world experiments verify the practicality of our algorithm. We will release our codes for the research community.

We address the problem of efficient 3-D exploration in indoor environments for micro aerial vehicles with limited sensing capabilities and payload/power constraints. We develop an indoor exploration framework that uses learning to predict the occupancy of unseen areas, extracts semantic features, samples viewpoints to predict information gains for different exploration goals, and plans informative trajectories to enable safe and smart exploration. Extensive experimentation in simulated and real-world environments shows the proposed approach outperforms the state-of-the-art exploration framework by 24% in terms of the total path length in a structured indoor environment and with a higher success rate during exploration.