In this paper, a monolithic RF cascode SiGe power amplifier (PA) design capable of enhancing its power-added efficiency (PAE) is demonstrated. Four RF switches are adopted at the bases of the common-emitter transistors, which can be turned on/off in response to the desired output power. Simulations show that by utilizing device size variation, our cascode PA achieves higher gain and PAE compared to conventional fixed-size cascode PA in the low power region; in addition, it also provides more output power and higher average PAE than single-stage common-emitter PAs. We also studied and compared the linearity performance of our cascode PAs vs. single-stage common-emitter PAs in a RF polar TX using an envelope tracking (ET) technique. We found that even through self-biasing for the common-base device can improve the output distortion of cascode PAs, a single-stage common-emitter SiGe PA designed for comparison is still considerably more linear than cascode PAs. Therefore, more careful system linearization design will be critical when the cascode PAs are adopted in RF polar transmitters (TXs), especially for broadband wireless applications such as mobile WiMAX studied here.

In this paper, we report both circuits design and system simulations using highly-efficient monolithic SiGe class-E power amplifier (PA) with an open-loop envelope tracking (ET) technique for mobile WiMAX/Wibro applications. The 1-stage and 2-stage class-E PAs were designed and fabricated in a 0.18µm BiCMOS SiGe technology. The 1-stage class-E PA achieved peak power added efficiency (PAE) of 62% at output power of 21dBm in single-tone measurement. The design of linear-assisted switching envelope amplifier is also discussed, which involves balancing the tradeoff between efficiency and signal fidelity. Detailed co-design system simulations including RF circuits and digital DSP blocks show that our class-E PA can be linearized by the open-loop ET technique, and the entire ET-based transmit (TX) system meets the stringent 802.16e TX mask with ∼33% overall average efficiency at output power of 18.5dBm.