With technology scaling, the wire delay as a fraction of the total delay is increasing, and the communication architecture is becoming a major bottleneck for system performance in systems on chip (SoCs). A communication-centric design paradigm, networks on chip (NoCs), has been proposed recently to address the communication issues of SoCs. As the geometries of devices approach the physical limits of operation, NoCs will be susceptible to various noise sources such as crosstalk, coupling noise, process variations, etc. Designing systems under such uncertain conditions become a challenge, as it is harder to predict the timing behavior of the system. The use of conservative design methodologies that consider all possible delay variations due to the noise sources, targeting safe system operation under all conditions will result in poor system performance. An aggressive design approach that provides resilience against such timing errors is required for maximizing system performance. In this paper, we present T-error, which is a timing-error-tolerant aggressive design method to design the individual components of the NoC (such as switches, links, and network interfaces), so that the communication subsystem can be clocked at a much higher frequency than a traditional conservative design (up to 1.5x increase in frequency). The NoC is designed to tolerate timing errors that arise from overclocking without substantially affecting the latency for communication. We also present a way to dynamically configure the NoC between the overclocked mode and the normal mode, where the frequency of operation is lower than or equal to the traditional design's frequency, so that the error recovery penalty is completely hidden under normal operation. Experiments on several benchmark applications show large performance improvement (up to 33% reduction in average packet latency) for the proposed system when compared to traditional systems.

With decreasing feature size of transistors, the interconnect wire delay is becoming a major bottleneck in current Systems on Chips (SoCs). Another effect of shrinking feature size is that the wires are becoming unreliable as they are increasingly susceptible to various noise sources such as cross-talk, coupling noise, soft errors etc. Increasing importance of wire delay and reliability has lead to a communication centric design approach, Networks on Chip (NoC), for building complex SoCs. Current NoC communication design methodologies are based on conservative design approaches and consider worst case operating conditions for link design, resulting in large latency penalty for data transmission. In order to sub-stantially decrease the link delay and thereby increase system performance an aggressive design approach is needed. In this work we present Terror, timing error tolerant communication system, for aggressively designing the links of NoCs. In our methodology, instead of avoiding timing errors by a worst-case design, we do aggressive design by tolerating timing errors. Simulation results show large latency savings (up to 35%) for the Terror based system compared to traditional design methodology.

The growing complexity of customizable single-chip multiprocessors is requiring communication resources that can only be provided by a highly-scalable communication infrastructure. This trend is exemplified by the growing number of network-on-chip (NoC) architectures that have been proposed recently for system-on-chip (SoC) integration. Developing NoC-based systems tailored to a particular application domain is crucial for achieving high-performance, energy-efficient customized solutions. The effectiveness of this approach largely depends on the availability of an ad hoc design methodology that, starting from a high-level application specification, derives an optimized NoC configuration with respect to different design objectives and instantiates the selected application specific on-chip micronetwork. Automatic execution of these design steps is highly desirable to increase SoC design productivity. This work illustrates a complete synthesis flow, called Netchip, for customized NoC architectures, that partitions the development work into major steps (topology mapping, selection, and generation) and provides proper tools for their automatic execution (SUNMAP, xpipescompiler). The entire flow leverages the flexibility of a fully reusable and scalable network components library called xpipes, consisting of highly-parameterizable network building blocks (network interface, switches, switch-to-switch links) that are design-time tunable and composable to achieve arbitrary topologies and customized domain-specific NoC architectures. Several experimental case studies are presented In the work, showing the powerful design space exploration capabilities of the proposed methodology and tools.