Photon-counting computed tomography (PCCT) based on photon-counting detectors (PCDs) represents a cutting-edge CT technology, offering higher spatial resolution, reduced radiation dose, and advanced material decomposition capabilities. Accurately modeling complex and nonlinear PCDs under limited calibration data becomes one of the challenges hindering the widespread accessibility of PCCT. This paper introduces a physics-ASIC architecture-driven deep learning detector model for PCDs. This model adeptly captures the comprehensive response of the PCD, encompassing both sensor and ASIC responses. We present experimental results demonstrating the model's exceptional accuracy and robustness with limited calibration data. Key advancements include reduced calibration errors, reasonable physics-ASIC parameters estimation, and high-quality and high-accuracy material decomposition images.

Photon-counting computed tomography (PCCT) may dramatically benefit clinical practice due to its versatility such as dose reduction and material characterization. However, the limited number of photons detected in each individual energy bin can induce severe noise contamination in the reconstructed image. Fortunately, the notable low-rank prior inherent in the PCCT image can guide the reconstruction to a denoised outcome. To fully excavate and leverage the intrinsic low-rankness, we propose a novel reconstruction algorithm based on quaternion representation (QR), called low-rank quaternion reconstruction (LOQUAT). First, we organize a group of nonlocal similar patches into a quaternion matrix. Then, an adjusted weighted Schatten-p norm (AWSN) is introduced and imposed on the matrix to enforce its low-rank nature. Subsequently, we formulate an AWSN-regularized model and devise an alternating direction method of multipliers (ADMM) framework to solve it. Experiments on simulated and real-world data substantiate the superiority of the LOQUAT technique over several state-of-the-art competitors in terms of both visual inspection and quantitative metrics. Moreover, our QR-based method exhibits lower computational complexity than some popular tensor representation (TR) based counterparts. Besides, the global convergence of LOQUAT is theoretically established under a mild condition. These properties bolster the robustness and practicality of LOQUAT, facilitating its application in PCCT clinical scenarios. The source code will be available at https://github.com/linzf23/LOQUAT.

Spectral CT can provide material characterization ability to offer more precise material information for diagnosis purposes. However, the material decomposition process generally leads to amplification of noise which significantly limits the utility of the material basis images. To mitigate such problem, an image domain noise suppression method was proposed in this work. The method performs basis transformation of the material basis images based on a singular value decomposition. The noise variances of the original spectral CT images were incorporated in the matrix to be decomposed to ensure that the transformed basis images are statistically uncorrelated. Due to the difference in noise amplitudes in the transformed basis images, a selective filtering method was proposed with the low-noise transformed basis image as guidance. The method was evaluated using both numerical simulation and real clinical dual-energy CT data. Results demonstrated that compared with existing methods, the proposed method performs better in preserving the spatial resolution and the soft tissue contrast while suppressing the image noise. The proposed method is also computationally efficient and can realize real-time noise suppression for clinical spectral CT images.

Recently, the use of photon counting detectors in computed tomography (PCCT) has attracted extensive attention. It is highly desired to improve the quality of material basis image and the quantitative accuracy of elemental composition, particularly when PCCT data is acquired at lower radiation dose levels. In this work, we develop a physics-constrained and noise-controlled diffusion model, PRECISION in short, to address the degraded quality of material basis images and inaccurate quantification of elemental composition mainly caused by imperfect noise model and/or hand-crafted regularization of material basis images, such as local smoothness and/or sparsity, leveraged in the existing direct material basis image reconstruction approaches. In stark contrast, PRECISION learns distribution-level regularization to describe the feature of ideal material basis images via training a noise-controlled spatial-spectral diffusion model. The optimal material basis images of each individual subject are sampled from this learned distribution under the constraint of the physical model of a given PCCT and the measured data obtained from the subject. PRECISION exhibits the potential to improve the quality of material basis images and the quantitative accuracy of elemental composition for PCCT.

Sparse-view Computed Tomography (CT) has the ability to reduce radiation dose and shorten the scan time, while the severe streak artifacts will compromise anatomical information. How to reconstruct high-quality images from sparsely sampled projections is a challenging ill-posed problem. In this context, we propose the unrolled Deep Residual Error iterAtive Minimization Network (DREAM-Net) based on a novel iterative reconstruction framework to synergize the merits of deep learning and iterative reconstruction. DREAM-Net performs constraints using deep neural networks in the projection domain, residual space, and image domain simultaneously, which is different from the routine practice in deep iterative reconstruction frameworks. First, a projection inpainting module completes the missing views to fully explore the latent relationship between projection data and reconstructed images. Then, the residual awareness module attempts to estimate the accurate residual image after transforming the projection error into the image space. Finally, the image refinement module learns a non-standard regularizer to further fine-tune the intermediate image. There is no need to empirically adjust the weights of different terms in DREAM-Net because the hyper-parameters are embedded implicitly in network modules. Qualitative and quantitative results have demonstrated the promising performance of DREAM-Net in artifact removal and structural fidelity.

Involuntary motion of the heart remains a challenge for cardiac computed tomography (CT) imaging. Although the electrocardiogram (ECG) gating strategy is widely adopted to perform CT scans at the quasi-quiescent cardiac phase, motion-induced artifacts are still unavoidable for patients with high heart rates or irregular rhythms. Dynamic cardiac CT, which provides functional information of the heart, suffers even more severe motion artifacts. In this paper, we develop a deep learning based framework for motion artifact reduction in dynamic cardiac CT. First, we build a PAD (Pseudo All-phase clinical-Dataset) based on a whole-heart motion model and single-phase cardiac CT images. This dataset provides dynamic CT images with realistic-looking motion artifacts that help to develop data-driven approaches. Second, we formulate the problem of motion artifact reduction as a video deblurring task according to its dynamic nature. A novel TT U-Net (Temporal Transformer U-Net) is proposed to excavate the spatiotemporal features for better motion artifact reduction. The self-attention mechanism along the temporal dimension effectively encodes motion information and thus aids image recovery. Experiments show that the TT U-Net trained on the proposed PAD performs well on clinical CT scans, which substantiates the effectiveness and fine generalization ability of our method. The source code, trained models, and dynamic demo will be available at https://github.com/ivy9092111111/TT-U-Net.

Low-dose computed tomography (LDCT) imaging faces great challenges. Although supervised learning has revealed great potential, it requires sufficient and high-quality references for network training. Therefore, existing deep learning methods have been sparingly applied in clinical practice. To this end, this paper presents a novel Unsharp Structure Guided Filtering (USGF) method, which can reconstruct high-quality CT images directly from low-dose projections without clean references. Specifically, we first employ low-pass filters to estimate the structure priors from the input LDCT images. Then, inspired by classical structure transfer techniques, deep convolutional networks are adopted to implement our imaging method which combines guided filtering and structure transfer. Finally, the structure priors serve as the guidance images to alleviate over-smoothing, as they can transfer specific structural characteristics to the generated images. Furthermore, we incorporate traditional FBP algorithms into self-supervised training to enable the transformation of projection domain data to the image domain. Extensive comparisons and analyses on three datasets demonstrate that the proposed USGF has achieved superior performance in terms of noise suppression and edge preservation, and could have a significant impact on LDCT imaging in the future.

X-ray computed tomography (CT) is of great clinical significance in medical practice because it can provide anatomical information about the human body without invasion, while its radiation risk has continued to attract public concerns. Reducing the radiation dose may induce noise and artifacts to the reconstructed images, which will interfere with the judgments of radiologists. Previous studies have confirmed that deep learning (DL) is promising for improving low-dose CT imaging. However, almost all the DL-based methods suffer from subtle structure degeneration and blurring effect after aggressive denoising, which has become the general challenging issue. This paper develops the Comprehensive Learning Enabled Adversarial Reconstruction (CLEAR) method to tackle the above problems. CLEAR achieves subtle structure enhanced low-dose CT imaging through a progressive improvement strategy. First, the generator established on the comprehensive domain can extract more features than the one built on degraded CT images and directly map raw projections to high-quality CT images, which is significantly different from the routine GAN practice. Second, a multi-level loss is assigned to the generator to push all the network components to be updated towards high-quality reconstruction, preserving the consistency between generated images and gold-standard images. Finally, following the WGAN-GP modality, CLEAR can migrate the real statistical properties to the generated images to alleviate over-smoothing. Qualitative and quantitative analyses have demonstrated the competitive performance of CLEAR in terms of noise suppression, structural fidelity and visual perception improvement.

The wide applications of X-ray computed tomography (CT) bring low-dose CT (LDCT) into a clinical prerequisite, but reducing the radiation exposure in CT often leads to significantly increased noise and artifacts, which might lower the judgment accuracy of radiologists. In this paper, we put forward a domain progressive 3D residual convolution network (DP-ResNet) for the LDCT imaging procedure that contains three stages: sinogram domain network (SD-net), filtered back projection (FBP), and image domain network (ID-net). Though both are based on the residual network structure, the SD-net and ID-net provide complementary effect on improving the final LDCT quality. The experimental results with both simulated and real projection data show that this domain progressive deep-learning network achieves significantly improved performance by combing the network processing in the two domains.