This paper introduces a new technique for TV standards conversion called "adaptive intra-frame line interpolation". The configuration and the performance of a digital converter developed by using the technique are also described. In the present converter, an input picture is divided into still and moving areas by measuring frame difference signals, and suitable interpolation parameters are adaptively chosen for each area. This method brings good results to both areas. Especially, the converter has enabled the converted picture to recover high vertical resolution of more than 350 TV lines in still pictures, which has never been obtained by any conventional intra-field line interpolation.

An experimental 50 Mbits/s pulse-code modulation-time-division multiple access (PCM-TDMA) system with time preassignment and time-assignment speech interpolation (TASI) features (called the TTT system) was built for use in a satellite test. This system was designed for application in the INTELSAT IV network and has the channel capacity of more than 700 telephone channels. This capacity can be increased up to twice when pulse-code modulation-time-assignment speech interpolation (PCM-TASI) is adopted. The field test was conducted via INTELSAT III in 1970 and satisfactory results were obtained, which encourages the introduction of the TDMA system for commercial use.