An upper bound on the effective error coefficient of a two-level code with two-stage decoding is presented. This bound provides a guideline for constructing two-level codes to achieve a good trade-off between the error performance and decoding complexity. Based on this bound, good two-level decompositions of some Reed-Muller codes for two-stage decoding are found. Simulation results on the error performances of some Reed-Muller codes of lengths up to 64 with two-stage soft-decision suboptimum decoding based on their two-level decompositions are given.>

The multilevel coding technique is used for constructing multilevel trellis M-ary phase-shift-keying (MPSK) modulation codes for the Rayleigh fading channel. In the construction of a code, all the factors which affect the code performance and its decoding complexity are considered. The error performance of some of these codes based on both one-stage optimum decoding and multistage suboptimum decoding has been simulated. The simulation results show that these codes achieve good error performance with small decoding complexity.>

Set partitioning is applied to multidimensional signal spaces over GF(q), i.e., GF/sup n1/(q) (n1or=d are presented. These codes use Reed-Solomon codes as component codes. Longer multilevel block codes are also constructed using q-ary block codes with block length longer than q+1 as component codes. Some quaternary multilevel block codes are presented with the same length and number of information symbols as, but larger distance than, the best previously known quaternary one-level block codes. It is proved that if all the component block codes are linear. the multilevel block code is also linear. Low-rate q-ary convolutional codes, word-error-correcting convolutional codes, and binary-to-q-ary convolutional codes can also be used to construct multilevel trellis codes over GF(q) or binary-to-q-ary trellis codes.>