We apply irregular low-density parity-check (LDPC) codes to the design of multilevel coded quadrature amplitude modulation (QAM) schemes for application in discrete multitone systems in frequency-selective channels. A combined Gray/Ungerboeck scheme is used to label each QAM constellation. The Gray-labeled bits are protected using an irregular LDPC code with iterative soft-decision decoding, while other bits are protected using a high-rate Reed-Solomon code with hard-decision decoding (or are left uncoded). The rate of the LDPC code is selected by analyzing the capacity of the channel seen by the Gray-labeled bits and is made adaptive by selective concatenation with an inner repetition code. Using a practical bit-loading algorithm, we apply this coding scheme to an ensemble of frequency-selective channels with Gaussian noise. Over a large number of channel realizations, this coding scheme provides an average effective coding gain of more than 7.5 dB at a bit-error rate of 10/sup -7/ and a block length of approximately 10/sup 5/ b. This represents a gap of approximately 2.3 dB from the Shannon limit of the additive white Gaussian noise channel, which could be closed to within 0.8-1.2 dB using constellation shaping.

In-building power lines have been considered as a medium for high speed data transmission for applications like home networking and Internet access. Frequency selectivity and time variation of this medium in addition to the high level of narrow-band and impulsive interference makes multi-carrier modulation, and especially its popular variant discrete multitone (DMT), an attractive modulation candidate for this application. This paper presents the results of our measurements of the high frequency characteristics of ordinary in-building power lines, as well as simulation results of a DMT transceiver system in an in-building power line environment.