An analysis of the potential and limitations of interferometry using near-specular signals of opportunity (SoOp) remote sensing systems for surface height measurement is presented. Results from an attempt at “repeat pass” interferometry with NASA’s Cyclone Global Navigation Satellite System (CYGNSS) mission conducted on September 30, 2019, are reviewed, along with models for the sensitivity of the interferometric phase to surface height in “single-pass” multiple-antenna observations. An analysis of 58 CYGNSS “raw I/F” tracks is reported for which single-pass interferometry is feasible given a specular point’s location in the overlap region of CYGNSS’s two receive antennas on a selected satellite. The observations and models developed highlight the impact of parameters such as the baseline distance separating the two antennas, the size of the scattering footprint, the incidence angle, the measurement bandwidth, and the measurement SNR. The results describe the potential of near-specular SoOp interferometry but also demonstrate factors that can limit the sensitivity achievable to a fraction of that obtained by interferometric synthetic aperture radars (SARs).

We present the validation methodology and results of Dynamic Surface Water eXtent from Harmonized Landsat Sentinel-2 (DSWx-HLS). The DSWx-HLS product is the first of the DSWx suite, comprised of products each which map water from Earth Observation optical and SAR satellites. We detail the generation of high-resolution (3 m) validation datasets from a globally-stratified sample of dry, moderate, and wet sites. We provide the precise accounting of the classification metrics used to verify the Observational Products for End-users from Remote Sensing Analysis (OPERA) project requirements. We also report broader classification metrics across the validation datasets considered. OPERA performs validation in the public domain to ensure that the validation activities are transparent and reproducible. The resulting validation datasets and provisional OPERA products are publicly available; the software used for validation is also open-source.

The Observational Products for End-Users from Remote Sensing Analysis (OPERA) project at the Jet Propulsion Laboratory (JPL) will provide a near-global Radiometric Terrain Corrected synthetic aperture radar (SAR) backscatter from Sentinel-1 (RTC-S1) product. The OPERA RTC-S1 product will deliver map-projected burst-based radar images with a geographic scope that includes all land masses excluding Antarctica, and with temporal sampling coincident with the availability of Sentinel-1 interferometric wide (IW) single-look complex (SLC) data. This paper presents the OPERA RTC-S1 product, providing details about its layers, static layers, and metadata; describing the product’s processing workflow, based on the ISCE3 framework and using the same algorithms developed for the NASA-ISRO Synthetic Aperture Radar (NISAR) mission; and outlining the algorithm verification and the product validation plan. We also present a global mosaic of preliminary OPERA RTC-S1 products generated from a global end-to-end test run from a Sentinel-1A orbit cycle. The OPERA RTC-S1 product will be publicly distributed through the Alaska Satellite Facility (ASF) Distributed Active Archive Center (DAAC) free of charge, with a release date scheduled for September 2023 with forward stream production.

In this work, we demonstrate how harmonized optical and SAR satellite imagery can be utilized for robust identification of open water surfaces at a global scale. We train an image segmentation architecture based convolutional neural network (CNN) to extract the most salient features from the input data and generate a per-pixel water/not-water classification. We find that combining optical and radar imagery helps reduce false positive and false negative inferences, illustrating the effectiveness of this harmonization. The resulting model is able to classify water surfaces at the resolution of the SAR sensor (12.5 meters) with a validation set precision and recall of 0.74 and 0.81 respectively. We also demonstrate that the trained model is capable of generating inferences beyond the geographic bounds of the training data.

In August 2020, SMAP released a new version of its soil moisture (SM) and vegetation optical depth (VOD) products. In this work, we review the methodology followed by the SMAP regularized dual-channel (DCA) retrieval algorithm. We show that the new implementation generated SM retrievals that not only satisfy the SMAP accuracy requirements but also show a performance comparable to the baseline single-channel algorithm that uses the V polarized brightness temperature (SCA-V). Due to a lack of in situ measurements we cannot evaluate the accuracy of the VOD, but in this work, we will show analysis with the intention of providing an understanding of the VOD product.

The soil moisture active passive (SMAP) mission was designed to acquire L-band radiometer measurements for the estimation of soil moisture (SM) with an average ubRMSD of not more than 0.04 m3/m3volumetric accuracy in the top 5 cm for vegetation with a water content of less than 5 kg/m2. Single-channel algorithm (SCA) and dual-channel algorithm (DCA) are implemented for the processing of SMAP radiometer data. The SCA using the vertically polarized brightness temperature (SCA-V) has been providing satisfactory SM retrievals. However, the DCA using prelaunch design and algorithm parameters for vertical and horizontal polarization data has a marginal performance. In this article, we show that with the updates of the roughness parameter h and the polarization mixing parameters Q, a modified DCA (MDCA) can achieve improved accuracy over DCA; it also allows for the retrieval of vegetation optical depth (VOD or τ). The retrieval performance of MDCA is assessed and compared with SCA-V and DCA using four years (April 1, 2015 to March 31, 2019) of in situ data from core validation sites (CVSs) and sparse networks. The assessment shows that SCA-V still outperforms all the implemented algorithms.

Soil Moisture Active Passive (SMAP) mission and the Soil Moisture and Ocean Salinity (SMOS) missions provide brightness temperature and soil moisture estimates every 2-3 days. SMAP brightness temperature observations were compared with SMOS observations at 40° incidence angle. The brightness temperatures from the two missions are close to each other but SMAP observations show a warmer TB bias (about 0.64 K: V pol and 1.14 K: H pol) as compared to SMOS. SMAP and SMOS missions use different retrieval algorithms and ancillary datasets which result in further inconsistencies between their soil moisture products. The reprocessed constant-angle SMOS brightness temperatures (SMOS-SMAP) were used in the SMAP soil moisture retrieval algorithm to develop a consistent multi-satellite product. The integrated product has an increased global revisit frequency (1 day) and period of record that is unattainable by either one of the satellites alone. The SMOS-SMAP soil moisture retrievals compared with in situ observations show a retrieval accuracy of less than 0.04 m3/m3. Results from the development and validation of the integrated soil moisture product will be presented.

The Soil Moisture Active Passive (SMAP) mission was designed to acquire and combine L-band radar and radiometer measurements for the estimation of soil moisture (SM) with an average ubRMSE of no more than 0.04 m3/m3volumetric accuracy in the top 5 cm for vegetation with water content of less than 5 kg/m2.Currently, a single-channel algorithm that uses the V polarized brightness temperature (SCA-V) is used to retrieve SM satisfying the defined requirements. Even though other alternatives were tested, SCA-V proved to be the best option for the retrieval of SM. In this work, we show that by choosing suitable roughness parameters, the use of two polarizations (H and V), mixed dual-channel algorithm (MDCA), and an additional constraint, regularized DCA (RDCA), not only provides retrieved SM that satisfies the aforementioned requirement but also allows for the retrieval of vegetation optical depth (VOD).

The NASA SMAP (Soil Moisture Active Passive) mission provides a global coverage of soil moisture measurements based on its L-band microwave radiometer every 2-3 days at about 40 km resolution. The soil moisture retrieval algorithms model the brightness temperature as a function of soil moisture, surface conditions and vegetation. External data sources inform the algorithms about the surface conditions and vegetation, which enable the retrieval of soil moisture. The inversion process contains uncertainties related to radiometer measurements, forward model assumptions and ancillary data sources. This study focuses on the uncertainties that depend on the seasonal evolution of the surface conditions and vegetation. The study compares the SMAP and core validation site (CVS) soil moisture values over a period of four years to extract the evolution of performance metrics over time. The analysis showed that most CVS that include managed agriculture exhibit significant time-dependent seasonal bias. This bias was linked to seasonal temperature cycle, which is a proxy to several features that can cause seasonally dependent errors in the SMAP product.

Soil Moisture Active Passive (SMAP) mission and the Soil Moisture and Ocean Salinity (SMOS) missions provide brightness temperature and soil moisture estimates every 2-3 days. SMAP brightness temperature observations were compared with SMOS observations at 40° incidence angle. The brightness temperatures from the two missions are not consistent. SMAP observations show a warmer TB bias (about 1.27 K: V pol and 0.62 K: H pol) as compared to SMOS. SMAP and SMOS missions use different retrieval algorithms and ancillary datasets which result in further inconsistencies between their soil moisture products. The reprocessed constant-angle SMOS brightness temperatures were used in the SMAP soil moisture retrieval algorithm to develop a consistent multi-satellite product. The integrated product has an increased global revisit frequency (1 day) and period of record that is unattainable by either one of the satellites alone. Results from the development and validation of the integrated soil moisture product will be presented.

In passive microwave remote sensing of soil moisture, the tau-omega (τ-ω) model has often been used to provide soil moisture estimates at a spatial scale representative of the satellite footprint dimensions. For modeling simplicity, model parameters such as the single scattering albedo (ω) and vegetation opacity (τ) that go into the geophysical inversion process are often assumed to be independent of polarizations. Although this absence of polarization dependence can often be justified in special cases as in low-frequency remote sensing or under dense vegetation conditions, it is not a robust assumption in general. Additional model parameterization errors arising from this assumption are possible, leading to degradation in soil moisture estimation accuracy. In this paper, we propose a time series approach to try to resolve the polarization dependence of several τ-ω model parameters as well as the temperature bias arising from the ancillary temperature data. The Version 4 of the Soil Moisture Active Passive (SMAP) Level 1B brightness temperature time series observations were used to illustrate the mechanics of this approach, with an emphasis on the comparison between resulting satellite retrieval and in situ data collected at several core validation sites. It was found that this time series approach resulted in significant reduction of dry bias exhibited in the current SMAP passive soil moisture data products, while retaining the same performance in other metrics of the current baseline passive soil moisture retrieval algorithm.

The Soil Moisture Active Passive (SMAP) mission was designed to acquire and combine L-band radar and radiometer measurements for the estimation of soil moisture with 4% volumetric accuracy away from coastal zones. In regions near the coast or near inland bodies of water, the SMAP footprint contains land and water, resulting in errors in the soil moisture estimation. In this paper, we address the effort to extract the brightness temperature related to the land fraction or water fraction (depending on the center of the footprint location) from the affected SMAP measurements. We evaluate the performance of our algorithm over simulated data. We then show results over real data. The new SMAP upgraded product is expected to be delivered on April 2018.

The SMAP microwave radiometer will see its third anniversary of operations on March 31, 2018. Instrument behavior is stable over 33 months of operation to date. The physical temperature of the internal calibration sources varies 0.5°C. The bias current of the noise source drifted by less than 0.1%. The avalanche breakdown voltage of the noise diode shows 0.01% seasonal variation. The average NEDT of the radiometer has maintained a stable 1-K value over the period. This stable behavior of the hardware is critical for the consistent calibration. The reflector emissivity was re-estimated using on-orbit data. Use of the new value nearly eliminates bias caused by solar eclipse during the southern hemisphere winter. The radiometer data were recalibrated using, as earlier, global ocean and cold sky views with additional ocean and land views at nadir incidence. The Version 4 recalibrated data exhibit 0.1-K RMS stability over average global ocean and monthly cold-sky views.

Soil Moisture Active Passive (SMAP) mission and the ESA Soil Moisture and Ocean Salinity (SMOS) missions provide brightness temperature and soil moisture estimates every 2-3 days. SMAP brightness temperature observations were compared with SMOS observations at 40° incidence angle. The brightness temperatures from the two missions are not consistent and have a bias of about 2.7K over land with respect to each other. SMAP and SMOS missions use different retrieval algorithms and ancillary datasets which result in further inconsistencies between the soil moisture products. The reprocessed constant-angle SMOS brightness temperatures were used in the SMAP soil moisture retrieval algorithm to develop a consistent multi-satellite product. The integrated product will have an increased global revisit frequency (1 day) and period of record that would be unattainable by either one of the satellites alone. Results from the development and validation of the integrated product will be presented.

The Advanced Microwave Scanning Radiometer 2 (AMSR2) is part of the Global Change Observation Mission-Water (GCOM-W) mission. AMSR2 fills the void left by the loss of the Advanced Microwave Scanning Radiometer-Earth Observing System (AMSR-E) after almost 10 years. Both missions provide brightness temperature observations that are used to retrieve soil moisture. Merging AMSR-E and AMSR2 will help build a consistent long-term dataset. Before tackling the integration of AMSR-E and AMSR2 it is necessary to conduct a thorough validation and assessment of the AMSR2 soil moisture products. This study focuses on validation of the AMSR2 soil moisture products by comparison with in situ reference data from a set of core validation sites. Three products that rely on different algorithms were evaluated; the JAXA Soil Moisture Algorithm (JAXA), the Land Parameter Retrieval Model (LPRM), and the Single Channel Algorithm (SCA). Results indicate that overall the SCA has the best performance based upon the metrics considered.

Since the beginning of its routine science operation in March 2015, the NASA SMAP observatory has been returning interference-mitigated brightness temperature observations at L-band (1.41 GHz) frequency from space. The resulting data enable frequent global mapping of soil moisture with a retrieval uncertainty below 0.040 m3/m3at a 36 km spatial scale. This paper describes the development and validation of an enhanced version of the current standard soil moisture product. Compared with the standard product that is posted on a 36 km grid, the new enhanced product is posted on a 9 km grid. Derived from the same time-ordered brightness temperature observations that feed the current standard passive soil moisture product, the enhanced passive soil moisture product leverages on the Backus-Gilbert optimal interpolation technique that more fully utilizes the additional information from the original radiometer observations to achieve global mapping of soil moisture with enhanced clarity. The resulting enhanced soil moisture product was assessed using long-term in situ soil moisture observations from core validation sites located in diverse biomes and was found to exhibit an average retrieval uncertainty below 0.040 m3/m3. As of December 2016, the enhanced soil moisture product has been made available to the public from the NASA Distributed Active Archive Center at the National Snow and Ice Data Center.

In this paper we summarize the effort to enhance the SMAP radiometer data. The applied technique is based on the Backus-Gilbert theory which is the classical estimation method in microwave radiometry. We show details of our implementation and summarize the assessment of the SMAP L1C_TB_E product.

NASA's Soil Moisture Active Passive (SMAP) mission launched on January 31, 2015 into a sun-synchronous 6 am/6 pm orbit with an objective to produce global mapping of high-resolution soil moisture and freeze-thaw state every 2-3 days. The SMAP radiometer began acquiring routine science data on March 31, 2015 and continues to operate nominally. SMAP's radiometer-derived standard soil moisture product (L2SMP) provides soil moisture estimates posted on a 36-km fixed Earth grid using brightness temperature observations and ancillary data. A beta quality version of L2SMP was released to the public in October, 2015, Version 3 validated L2SMP soil moisture data were released in May, 2016, and Version 4 L2SMP data were released in December, 2016. Version 4 data are processed using the same soil moisture retrieval algorithms as previous versions, but now include retrieved soil moisture from both the 6 am descending orbits and the 6 pm ascending orbits. Validation of 19 months of the standard L2SMP product was done for both AM and PM retrievals using in situ measurements from global core cal/val sites. Accuracy of the soil moisture retrievals averaged over the core sites showed that SMAP accuracy requirements are being met.

Soil moisture impacts exchanges of water, energy and carbon fluxes between the land surface and the atmosphere. Passive microwave remote sensing at L-band can capture spatial and temporal patterns of soil moisture in the landscape. Both ESA and NASA have launched L-band radiometers, in the form of the SMOS and SMAP satellites respectively, to monitor soil moisture globally, every 3-day at about 40 km resolution. However, their coarse scale restricts the range of applications. While SMAP included an L-band radar to downscale the radiometer soil moisture to 9 km, the radar failed after 3 months and this initial approach is not applicable to developing a consistent long term soil moisture product across the two missions anymore. Existing optical-, radiometer-, and oversampling-based downscaling methods could be an alternative to the radar-based approach for delivering such data. Nevertheless, retrieval of a consistent high resolution soil moisture product remains a challenge, and there has been no comprehensive intercomparison of the alternate approaches. This research undertakes an assessment of the different downscaling approaches using the SMAPEx-4 field campaign data.

The NASA Soil Moisture Active Passive (SMAP) satellite mission was launched on January 31, 2015 to provide global mapping of high-resolution soil moisture and freeze-thaw state every 2-3 days using an L-band (active) radar and an L-band (passive) radiometer. The Level 2 radiometer-only soil moisture product (L2_SM_P) provides soil moisture estimates posted on a 36-km Earth-fixed grid using brightness temperature observations from descending passes. This paper provides the first comparison of the validated-release L2_SM_P product with soil moisture products provided by the Soil Moisture and Ocean Salinity (SMOS), Aquarius, Advanced Scatterometer (ASCAT), and Advanced Microwave Scanning Radiometer 2 (AMSR2) missions. This comparison was conducted as part of the SMAP calibration and validation efforts. SMAP and SMOS appear most similar among the five soil moisture products considered in this paper, overall exhibiting the smallest unbiased root-mean-square difference and highest correlation. Overall, SMOS tends to be slightly wetter than SMAP, excluding forests where some differences are observed. SMAP and Aquarius can only be compared for a little more than two months; they compare well, especially over low to moderately vegetated areas. SMAP and ASCAT show similar overall trends and spatial patterns with ASCAT providing wetter soil moistures than SMAP over moderate to dense vegetation. SMAP and AMSR2 largely disagree in their soil moisture trends and spatial patterns; AMSR2 exhibits an overall dry bias, while desert areas are observed to be wetter than SMAP.

With emphasis on physics-based techniques, a multi-objective optimization approach to combined radar-radiometer soil moisture estimation is presented in this work. Soil moisture estimation is demonstrated via application of this method to SMAP high resolution radar and coarse resolution radiometer data. Comparisons are then made with the SMAP baseline active-passive soil moisture output data product. A strong agreement between the two techniques, especially in capturing spatial distributions of soil moisture is observed.

GCOM-W AMSR2 provides continuity following AMSR-E and the opportunity to generate a global long-term satellite soil moisture data record from the same instrument type. Various soil moisture products are being developed using AMSR observations. The JAXA soil moisture along with the Single Channel Algorithm (SCA) product were evaluated using in situ observations from different geographical domains. Both the JAXA and SCA soil moisture estimates capture the overall climatological features and the overall spatial structure of the two products is similar. The JAXA soil moisture product shows a lower dynamic range in the retrieved soil moisture. The SCA performs well over low and moderately vegetated areas. This study focuses on the development of the AMSR2 soil moisture product. Validation results using in situ observations from diverse climate and land cover conditions will be presented.

NASA's Soil Moisture Active Passive (SMAP) mission launched on January 31, 2015 into a sun-synchronous 6 am/6 pm orbit with an objective to produce global mapping of high-resolution soil moisture and freeze-thaw state every 2-3 days using an L-band (active) radar and an L-band (passive) radiometer. The SMAP radiometer began acquiring routine science data on March 31, 2015 and continues to operate nominally. SMAP's radiometer-derived soil moisture product (L2_SM_P) provides soil moisture estimates posted on a 36 km fixed Earth grid using brightness temperature observations from descending (6 am) passes and ancillary data. A beta quality version of L2_SM_P was released to the public in September, 2015, with the fully validated L2_SM_P soil moisture data expected to be released in May, 2016. Additional improvements (including optimization of retrieval algorithm parameters and upscaling approaches) and methodology expansions (including increasing the number of core sites, model-based intercomparisons, and results from several intensive field campaigns) are anticipated in moving from accuracy assessment of the beta quality data to an evaluation of the fully validated L2_SM_P data product.

The National Aeronautics and Space Administration (NASA) Soil Moisture Active Passive (SMAP) satellite mission was launched on January 31, 2015. The observatory was developed to provide global mapping of high-resolution soil moisture and freeze-thaw state every two to three days using an L-band (active) radar and an L-band (passive) radiometer. After an irrecoverable hardware failure of the radar on July 7, 2015, the radiometer-only soil moisture product became the only operational soil moisture product for SMAP. The product provides soil moisture estimates posted on a 36 km Earth-fixed grid produced using brightness temperature observations from descending passes. Within months after the commissioning of the SMAP radiometer, the product was assessed to have attained preliminary (beta) science quality, and data were released to the public for evaluation in September 2015. The product is available from the NASA Distributed Active Archive Center at the National Snow and Ice Data Center. This paper provides a summary of the Level 2 Passive Soil Moisture Product (L2_SM_P) and its validation against in situ ground measurements collected from different data sources. Initial in situ comparisons conducted between March 31, 2015 and October 26, 2015, at a limited number of core validation sites (CVSs) and several hundred sparse network points, indicate that the V-pol Single Channel Algorithm (SCA-V) currently delivers the best performance among algorithms considered for L2_SM_P, based on several metrics. The accuracy of the soil moisture retrievals averaged over the CVSs was 0.038 m3/m3unbiased root-mean-square difference (ubRMSD), which approaches the SMAP mission requirement of 0.040 m3/m3.

The Advanced Microwave Scanning Radiometer-EOS (AMSR-E) on Aqua and WindSat on Coriolis instruments have collected multichannel passive microwave data over the global land and oceans since 2002 and 2003, respectively. AMSR-E on Aqua ceased operation in October 2011 due to a malfunction in the antenna scanning mechanism. AMSR-E and WindSat have similar frequencies, bandwidths, polarizations, incidence angles and instantaneous fields of view (IFOVs), but there are some differences in their configurations. The altitudes and local overpass times also differ between the AMSR-E and WindSat sensors. The time series of data from the two instruments have a long period of overlap, which can be used to intercompare and cross-calibrate the instrument data sets taking into account the instrument differences. This would allow retrieval of geophysical parameters using common algorithms that could take advantage of the increased time duration and sampling coverage afforded by combining data from the two sensors. In this paper, we focus on land applications and compare the multichannel data from these two sensors over land. Channels useful primarily for soil moisture and vegetation water content studies (i.e., ~ 6, ~ 10, ~ 18, and ~ 37 GHz at H- and V-pol) are used in the comparisons. To minimize differences caused by surface temperature effects related to local overpass times, only descending passes (with Equator crossing times for AMSR-E of 1:30 a.m. and WindSat 6:00 a.m.) are considered. Homogeneous and temporally stable sites such as Dome-C, Antarctica and the Amazon forest, and a flat and bare region in the Sahara desert are chosen to evaluate similarities and differences among comparable channel observations. Taking into consideration the sensor configurations and geophysical conditions during the descending overpasses, reasonably good agreement is observed between AMSR-E and WindSat measurements over the globe.

SMOS observations provide an opportunity to develop a testbed for the evaluation of different SMAP algorithm options. The use of real-world global observations will help in the development and selection of different land surface parameters and ancillary observations needed for the soil moisture algorithms. In this study, SMOS observations were used with one soil moisture retrieval algorithm and the results were evaluated using in situ soil moisture measurements. The SMOS soil moisture product, which exploits multiple incidence angle observations, compares well with the ground-based observations (RMSE 0.043 m3/m3(ascending) and 0.047 m3/m3(descending)). The alternative SMAP compatible algorithm also performed well (RMSE 0.040 m3/m3(ascending) and 0.043 m3/m3(descending)). Although preliminary, these initial results are encouraging for the potential of SMAP to meet its required soil moisture accuracy.

Microwave radiometry soil moisture retrieval methods suffer from uncertainties about the representation of several effects, including dielectric mixing, surface roughness, and vegetation opacity. These uncertainties lead to two major types of error: systematic bias and random errors. The effect of the uncertainties is studied using the Soil Moisture Active Passive Algorithm Testbed, a simulation environment for evaluating error propagation in retrieval algorithms, and two different common retrieval algorithms (single and dual polarizations). The two types of errors are simulated by using different representations for each factor in the forward and retrieval parts. For both algorithms, this approach introduces a spatially variable bias, which is particularly large when using a single-polarization retrieval algorithm. This paper illustrates the emergence of both this bias and the random error due to uncertainty in the representation of vegetation and soil texture effects in retrieval algorithms. The dependence of these two types of error on vegetation and soil texture properties is shown through mapping them over the simulation region. The relative contribution of these errors to the total error is strongly dependent on the simulation conditions and is not necessarily indicative of what may be experienced during actual observations. Uncertainty due to roughness representation causes a lower error than uncertainty in vegetation opacity and dielectric mixing parameterizations in the simulated soil moisture retrieval. Summation and compensation of multiple errors can cause the estimate error to increase with improved radiative transfer knowledge, even after bias removal. The retrieval of soil moisture from microwave measurements depends on several other parameterizations that are also uncertain. This paper is limited to only three parameterizations that are considered to be among the larger contributors to bias.

In this paper, we describe our approach to simulate realistic L-band brightness temperatures to be measured by the Soil Moisture Active Passive (SMAP) mission. These realistic simulated measurements are crucial because they provide a quantitative basis by which we develop and improve our pre-launch retrieval algorithms for soil moisture at 9-km and 36-km spatial scales.

We developed an algorithm to estimate surface soil moisture, vegetation optical depth and fractional open water cover using satellite microwave radiometry. Soil moisture results compare favorably with a simple antecedent site precipitation index, and respond rapidly to precipitation events indicated by TRMM. High optical depth reduces soil moisture sensitivity in forests and croplands during peak biomass, although tundra locations maintain soil moisture sensitivity despite high optical depth. Optical depth varies with characteristic seasonality across vegetation cover types and tracks measures of vegetation canopy cover from MODIS. The algorithm developed in this study is able to monitor the daily variability of several important land surface state variables.

This article describes the upgraded PALS instrument and the characteristics of data acquired from the Cloud Land Atmospheric Interaction Campaign (CLASIC) 2007. The data acquired over lake passes were used to remove the radiometer calibration bias. The calibrated radiometer data showed significant consistency with the L-band land emission model for soil surfaces published in the literature. We observed significant temporal (days) changes of a few dB in the radar data. The change of radar backscatter appeared to correlate well with the change of in situ soil moisture or the soil moisture data derived from the PALS dual-polarized brightness temperatures. The radar vegetation index also correlated well with the vegetation opacity estimated from the radiometer data. The preliminary analyses suggest complementary information contained in the surface emissivity and backscatter signatures for the retrieval of soil moisture and vegetation water content.

Methods are developed and evaluated to retrieve surface soil temperature information for the advanced microwave scanning radiometer on earth observing system for seven boreal forest and Arctic tundra biophysical monitoring sites across Alaska and Northern Canada. A multiple-band iterative radiative transfer process-based method producing dynamic vegetation and snow cover correction quantities and an empirical multiple regression method using several frequencies are employed. The seasonal pattern of microwave emission and relative accuracy of the soil temperature retrievals are influenced strongly by landscape properties, including the presence of open water, vegetation type and seasonal phenology, snow cover, and freeze-thaw transitions. The retrieval of soil temperature is similar for the two methods with an overall root-mean-square error of 3.1-3.9 K during summer thawed conditions, with a larger error occurring in winter during periods of dynamic snow cover and freeze-thaw state. These results indicate that at high latitudes, the influence of the atmosphere may be less important than that of surface conditions in determining the relative accuracy of the estimated soil temperature. Impacts of surface conditions on surface emissivity, observed brightness temperature, and estimated soil temperature are discussed.

Rainfall leads to errors and limitations on the soil moisture retrieval using satellite radiometry. To understand the impact of rainfall, we examined the temporal and spatial correlations between rainfall and soil moisture using AMSR-E (advanced microwave scanning radiometer-EOS) data. Scan by scan (swath basis) analyses were conducted to find the short time scale relationship between the two physical parameters. The retention of soil moisture after rainfall in different climatic regimes (e.g. humid and arid regions) was also examined.

Abstract : An important issue in the development of a dedicated space borne soil moisture sensor has been concern over the reliability of soil moisture retrievals in densely vegetated areas and the global extent over which retrievals will be possible. Errors in retrieved soil moisture can originate from a variety of sources within the measurement and retrieval process. In addition to instrument error, three key contributors to retrieval error are the masking of the soil microwave signal by vegetation, the interplay between nonlinear retrieval physics and the relatively poor spatial resolution of space borne sensors, and retrieval parameter uncertainty. Quantification of these errors requires the realistic specification of land surface soil moisture heterogeneity and spatial vegetation patterns. Since detailed soil moisture patterns are currently difficult to obtain from direct observations, an attractive alternative is the application of an observing system simulation experiment (OSSE) in which simulated land surface states are propagated through the sensor measurement and retrieval process to investigate and constrain expected levels of retrieval error. This manuscript describes results from an OSSE designed out to simulate the impact of land surface heterogeneity, instrument error, and retrieval parameter uncertainty on radiometer-only soil moisture products derived from the NASA ESSP Hydrosphere State (Hydros) mission.

Based on 1-km land surface model geophysical predictions within the United States Southern Great Plains (Red-Arkansas River basin), an observing system simulation experiment (OSSE) is carried out to assess the impact of land surface heterogeneity, instrument error, and parameter uncertainty on soil moisture products derived from the National Aeronautics and Space Administration Hydrosphere State (Hydros) mission. Simulated retrieved soil moisture products are created using three distinct retrieval algorithms based on the characteristics of passive microwave measurements expected from Hydros. The accuracy of retrieval products is evaluated through comparisons with benchmark soil moisture fields obtained from direct aggregation of the original simulated soil moisture fields. The analysis provides a quantitative description of how land surface heterogeneity, instrument error, and inversion parameter uncertainty impacts propagate through the measurement and retrieval process to degrade the accuracy of Hydros soil moisture products. Results demonstrate that the discrete set of error sources captured by the OSSE induce root mean squared errors of between 2.0% and 4.5% volumetric in soil moisture retrievals within the basin. Algorithm robustness is also evaluated for the case of artificially enhanced vegetation water content (W) values within the basin. For large W(>3 kg/spl middot/m/sup -2/), a distinct positive bias, attributable to the impact of sub- footprint-scale landcover heterogeneity, is identified in soil moisture retrievals. Prospects for the removal of this bias via a correction strategy for inland water and/or the implementation of an alternative aggregation strategy for surface vegetation and roughness parameters are discussed.

Radio-frequency interference (RFI) is an increasingly serious problem for passive and active microwave sensing of the Earth. To satisfy their measurement objectives, many spaceborne passive sensors must operate in unprotected bands, and future sensors may also need to operate in unprotected bands. Data from these sensors are likely to be increasingly contaminated by RFI as the spectrum becomes more crowded. In a previous paper we reported on a preliminary investigation of RFI observed over the United States in the 6.9-GHz channels of the Advanced Microwave Scanning Radiometer (AMSR-E) on the Earth Observing System Aqua satellite. Here, we extend the analysis to an investigation of RFI in the 6.9- and 10.7-GHz AMSR-E channels over the global land domain and for a one-year observation period. The spatial and temporal characteristics of the RFI are examined by the use of spectral indices. The observed RFI at 6.9 GHz is most densely concentrated in the United States, Japan, and the Middle East, and is sparser in Europe, while at 10.7 GHz the RFI is concentrated mostly in England, Italy, and Japan. Classification of RFI using means and standard deviations of the spectral indices is effective in identifying strong RFI. In many cases, however, it is difficult, using these indices, to distinguish weak RFI from natural geophysical variability. Geophysical retrievals using RFI-filtered data may therefore contain residual errors due to weak RFI. More robust radiometer designs and continued efforts to protect spectrum allocations will be needed in future to ensure the viability of spaceborne passive microwave sensing.

The HYDROS mission objective is to collect global scale measurements of the Earth's soil moisture and land surface freeze/thaw conditions, using a combined L band radiometer and radar system operating at 1.41 and 1.26 GHz, respectively. In order to examine how HYDROS soil moisture retrieval will be performed and how the retrieval accuracy will be impacted by vegetation water content and surface heterogeneity, an observing system simulation experiment (OSSE) was conducted using a modeled geophysical domain in the south-central United States centered on the Arkansas-Red River basin for a one-month period in 1994. Three separate radiometer retrieval algorithms were evaluated: (1) a single-channel algorithm (H polarization), (2) a two-channel iterative algorithm, and (3) a two-channel reflectivity ratio algorithm. Analysis indicates that the HYDROS accuracy goal of 4% volumetric soil moisture can be met anywhere in the test basin except woodland areas. Nonlinear scaling of higher resolution ancillary vegetation data can adversely affect algorithm retrieval accuracies, especially in heavy tree areas on the east side of the basin

The Advanced Microwave Scanning Radiometer (AMSR-E) on the Earth Observing System (EOS) Aqua satellite was launched on May 4, 2002. The AMSR-E instrument provides a potentially improved soil moisture sensing capability over previous spaceborne radiometers such as the Scanning Multichannel Microwave Radiometer and Special Sensor Microwave/Imager due to its combination of low frequency and higher spatial resolution (approximately 60 km at 6.9 GHz). The AMSR-E soil moisture retrieval approach and its implementation are described in this paper. A postlaunch validation program is in progress that will provide evaluations of the retrieved soil moisture and enable improved hydrologic applications of the data. Key aspects of the validation program include assessments of the effects on retrieved soil moisture of variability in vegetation water content, surface temperature, and spatial heterogeneity. Examples of AMSR-E brightness temperature observations over land are shown from the first few months of instrument operation, indicating general features of global vegetation and soil moisture variability. The AMSR-E sensor calibration and extent of radio frequency interference are currently being assessed, to be followed by quantitative assessments of the soil moisture retrievals.