Flexible sensors are increasingly employed in soft robotics and wearable devices to provide proprioception of freeform deformations. Although supervised learning can train shape predictors from sensor signals, prediction accuracy strongly depends on sensor layout, which is typically determined heuristically or through trial-and-error. This work introduces a model-free, data-driven computational pipeline that jointly optimizes the number, length, and placement of flexible length-measurement sensors together with the parameters of a shape prediction network for large freeform deformations. Unlike model-based approaches, the proposed method relies solely on datasets of deformed shapes, without requiring physical simulation models, and is therefore broadly applicable to diverse robotic sensing tasks. The pipeline incorporates differentiable loss functions that account for both prediction accuracy and manufacturability constraints. By co-optimizing sensor layouts and network parameters, the method significantly improves deformation prediction accuracy over unoptimized layouts while ensuring practical feasibility. The effectiveness and generality of the approach are validated through numerical and physical experiments on multiple soft robotic and wearable systems.

This paper presents a correspondence-free, function-based sim-to-real learning method for controlling deformable freeform surfaces. Unlike traditional sim-to-real transfer methods that strongly rely on marker points with full correspondences, our approach simultaneously learns a deformation function space and a confidence map – both parameterized by a neural network – to map simulated shapes to their real-world counterparts. As a result, the sim-to-real learning can be conducted by input from either a 3D scanner as point clouds (without correspondences) or a motion capture system as marker points (tolerating missed markers). The resultant sim-to-real transfer can be seamlessly integrated into a neural network-based computational pipeline for inverse kinematics and shape control. We demonstrate the versatility and adaptability of our method on two vision devices and across four pneumatically actuated soft robots: a deformable membrane, a robotic mannequin, and two soft manipulators.

This paper presents a method for computing interleaved additive and subtractive manufacturing operations to fabricate models of arbitrary shapes. We solve the manufacturing planning problem by searching a sequence of inverse operations that progressively transform a target model into a null shape. Each inverse operation corresponds to either an additive or a subtractive step, ensuring both manufacturability and structural stability of intermediate shapes throughout the process. We theoretically prove that any model can be fabricated exactly using a sequence generated by our approach. To demonstrate the effectiveness of this method, we adopt a voxel-based implementation and develop a scalable algorithm that works on models represented by a large number of voxels. Our approach has been tested across a range of digital models and further validated through physical fabrication on a hybrid manufacturing system with automatic tool switching.

We propose a neural network-based computational framework for the simultaneous optimization of structural topology, curved layers, and path orientations to achieve strong anisotropic strength in fiber-reinforced thermoplastic composites while ensuring manufacturability. Our framework employs three implicit neural fields to represent geometric shape, layer sequence, and fiber orientation. This enables the direct formulation of both design and manufacturability objectives - such as anisotropic strength, structural volume, machine motion control, layer curvature, and layer thickness - into an integrated and differentiable optimization process. By incorporating these objectives as loss functions, the framework ensures that the resultant composites exhibit optimized mechanical strength while remaining its manufacturability for filament-based multi-axis 3D printing across diverse hardware platforms. Physical experiments demonstrate that the composites generated by our co-optimization method can achieve an improvement of up to 33.1% in failure loads compared to composites with sequentially optimized structures and manufacturing sequences.

Joint injuries, and their long-term consequences, present a substantial global health burden. Wearable prophylactic braces are an attractive potential solution to reduce the incidence of joint injuries by limiting joint movements that are related to injury risk. Given human motion and ground reaction forces, we present a computational framework that enables the design of personalized braces by optimizing the distribution of microstructures and elasticity. As varied brace designs yield different reaction forces that influence kinematics and kinetics analysis outcomes, the optimization process is formulated as a differentiable end-to-end pipeline in which the design domain of microstructure distribution is parameterized onto a neural network. The optimized distribution of microstructures is obtained via a self-learning process to determine the network coefficients according to a carefully designed set of losses and the integrated biomechanical and physical analyses. Since knees and ankles are the most commonly injured joints, we demonstrate the effectiveness of our pipeline by designing, fabricating, and testing prophylactic braces for the knee and ankle to prevent potentially harmful joint movements.

This paper presents a learning based planner for computing optimized 3D printing toolpaths on prescribed graphs, the challenges of which include the varying graph structures on different models and the large scale of nodes & edges on a graph. We adopt an on-the-fly strategy to tackle these challenges, formulating the planner as a Deep Q-Network (DQN) based optimizer to decide the next 'best' node to visit. We construct the state spaces by the Local Search Graph (LSG) centered at different nodes on a graph, which is encoded by a carefully designed algorithm so that LSGs in similar configurations can be identified to re-use the earlier learned DQN priors for accelerating the computation of toolpath planning. Our method can cover different 3D printing applications by defining their corresponding reward functions. Toolpath planning problems in wire-frame printing, continuous fiber printing, and metallic printing are selected to demonstrate its generality. The performance of our planner has been verified by testing the resultant toolpaths in physical experiments. By using our planner, wire-frame models with up to 4.2k struts can be successfully printed, up to 93.3% of sharp turns on continuous fiber toolpaths can be avoided, and the thermal distortion in metallic printing can be reduced by 24.9%.

Structural design with multi-family triply periodic minimal surfaces (TPMS) is a meaningful work that can combine the advantages of different types of TPMS. However, very few methods consider the influence of the blending of different TPMS on structural performance, and the manufacturability of final structure. Therefore, this work proposes a method to design manufacturable microstructures with topology optimization (TO) based on spatially-varying TPMS. In our method, different types of TPMS are simultaneously considered in the optimization to maximize the performance of designed microstructure. The geometric and mechanical properties of the unit cells generated with TPMS, that is minimal surface lattice cell (MSLC), are analyzed to obtain the performance of different types of TPMS. In the designed microstructure, MSLCs of different types are smoothly blended with an interpolation method. To analyze the influence of deformed MSLCs on the performance of the final structure, the blending blocks are introduced to describe the connection cases between different types of MSLCs. The mechanical properties of deformed MSLCs are analyzed and applied in TO process to reduce the influence of deformed MSLCs on the performance of final structure. The infill resolution of MSLC within a given design domain is determined according to the minimal printable wall thickness of MSLC and structural stiffness. Both numerical and physical experimental results demonstrate the effectiveness of the proposed method.

The design of the light-weight infill structure is a hot research topic in additive manufacturing. In recent years, various infill structures have been proposed to reduce the amount of printing material. However, 3D models filled with them may have very different structural performances under different loading conditions. In addition, most of them are not self-supporting. To mitigate these issues, a novel light-weight infill structure based on the layer construction is proposed in this article. The layers of the proposed infill structure continuously and periodically transform between triangles and hexagons. The geometries of two adjacent layers are controlled to be self-supporting for different 3D printing technologies. The machine code (Gcode) of the filled 3D model is generated in the construction of the infill structure for 3D printers. That means 3D models filled with the proposed infill structure do not need an extra slicing process before printing, which is time consuming in some cases. Structural simulations and physical experiments demonstrate that our infill structure has comparable structural performance under different loading conditions. Furthermore, the relationship between the structural stiffness and the parameters of the infill structure is investigated, which will be helpful for non-professional users.

Inspired by natural cellular materials such as trabecular bone, lattice structures have been developed as a new type of lightweight material. In this paper we present a novel method to design lattice structures that conform with both the principal stress directions and the boundary of the optimized shape. Our method consists of two major steps: the first optimizes concurrently the shape (including its topology) and the distribution of orthotropic lattice materials inside the shape to maximize stiffness under application-specific external loads; the second takes the optimized configuration (i.e., locally-defined orientation, porosity, and anisotropy) of lattice materials from the previous step, and extracts a globally consistent lattice structure by field-aligned parameterization. Our approach is robust and works for both 2D planar and 3D volumetric domains. Numerical results and physical verifications demonstrate remarkable structural properties of conforming lattice structures generated by our method.

Offsetting-based hollowing is a solid modeling operation widely used in 3D printing, which can change the model's physical properties and reduce the weight by generating voids inside a model. However, a hollowing operation can lead to additional supporting structures for fabrication in interior voids, which cannot be removed. As a consequence, the result of a hollowing operation is affected by these additional supporting structures when applying the operation to optimize physical properties of different models. This paper proposes a support-free hollowing framework to overcome the difficulty of fabricating voids inside a solid. The challenge of computing a support-free hollowing is decomposed into a sequence of shape optimization steps, which are repeatedly applied to interior mesh surfaces. The optimization of physical properties in different applications can be easily integrated into our framework. Comparing to prior approaches that can generate support-free inner structures, our hollowing operation can reduce more volume of material and thus provide a larger solution space for physical optimization. Experimental tests are taken on a number of 3D models to demonstrate the effectiveness of this framework.

Abstract We present a pipeline of algorithms that decomposes a given polygon model into parts such that each part can be 3D printed with high (outer) surface quality. For this we exploit the fact that most 3D printing technologies have an anisotropic resolution and hence the surface smoothness varies significantly with the orientation of the surface. Our pipeline starts by segmenting the input surface into patches such that their normals can be aligned perpendicularly to the printing direction. A 3D Voronoi diagram is computed such that the intersections of the Voronoi cells with the surface approximate these surface patches. The intersections of the Voronoi cells with the input model's volume then provide an initial decomposition. We further present an algorithm to compute an assembly order for the parts and generate connectors between them. A post processing step further optimizes the seams between segments to improve the visual quality. We run our pipeline on a wide range of 3D models and experimentally evaluate the obtained improvements in terms of numerical, visual, and haptic quality.

Abstract We present an adaptive slicing scheme for reducing the manufacturing time for 3D printing systems. Based on a new saliency‐based metric, our method optimizes the thicknesses of slicing layers to save printing time and preserve the visual quality of the printing results. We formulate the problem as a constrained ℓ0 optimization and compute the slicing result via a two‐step optimization scheme. To further reduce printing time, we develop a saliency‐based segmentation scheme to partition an object into subparts and then optimize the slicing of each subpart separately. We validate our method with a large set of 3D shapes ranging from CAD models to scanned objects. Results show that our method saves printing time by 30–40% and generates 3D objects that are visually similar to the ones printed with the finest resolution possible.

A novel representation of a triangular mesh surface using a set of scale-invariant measures is proposed. The measures consist of angles of the triangles (triangle angles) and dihedral angles along the edges (edge angles) which are scale and rigidity independent. The vertex coordinates for a mesh give its scale-invariant measures, unique up to scale, rotation, and translation. Based on the representation of mesh using scale-invariant measures, a two-step iterative deformation algorithm is proposed, which can arbitrarily edit the mesh through simple handles interaction. The algorithm can explicitly preserve the local geometric details as much as possible in different scales even under severe editing operations including rotation, scaling, and shearing. The efficiency and robustness of the proposed algorithm are demonstrated by examples.

3D printers have become popular in recent years and enable fabrication of custom objects for home users. However, the cost of the material used in printing remains high. In this paper, we present an automatic solution to design a skin-frame structure for the purpose of reducing the material cost in printing a given 3D object. The frame structure is designed by an optimization scheme which significantly reduces material volume and is guaranteed to be physically stable, geometrically approximate, and printable. Furthermore, the number of struts is minimized by solving an l 0 sparsity optimization. We formulate it as a multi-objective programming problem and an iterative extension of the preemptive algorithm is developed to find a compromise solution. We demonstrate the applicability and practicability of our solution by printing various objects using both powder-type and extrusion-type 3D printers. Our method is shown to be more cost-effective than previous works.