Using PIM to overcome memory bottleneck • Although various bandwidth increase methods have been proposed, it is physically impossible to achieve a breakthrough increase. - Limited by # of PCB wires, # of CPU ball, and thermal constraints • PIM has been proposed to improve performance of bandwidth-intensive workloads and improve energy efficiency by reducing computing-memory data movement.

Of late, deep neural networks have become ubiquitous in mobile applications. As mobile devices generally require immediate response while maintaining user privacy, the demand for on-device machine learning technology is on the increase. Nevertheless, mobile devices suffer from restricted hardware resources, whereas deep neural networks involve considerable computation and communication. Therefore, the implementation of a neural-network specialized hardware accelerator, generally called neural processing unit (NPU), has started to gain attention for the mobile application processor (AP). However, NPUs for commercial mobile AP face two challenges that are difficult to realize simultaneously: execution of a wide range of applications and efficient performance.In this paper, we propose a flexible but efficient NPU architecture for a Samsung flagship mobile system-on-chip (SoC). To implement an efficient NPU, we design an energy-efficient inner-product engine that utilizes the input feature map sparsity. We propose a re-configurable MAC array to enhance the flexibility of the proposed NPU, dynamic internal memory port assignment to maximize on-chip memory bandwidth utilization, and efficient architecture to support mixed-precision arithmetic. We implement the proposed NPU using the Samsung 5nm library. Our silicon measurement experiments demonstrate that the proposed NPU achieves 290.7 FPS and 13.6 TOPS/W, when executing an 8-bit quantized Inception-v3 model [1] with a single NPU core. In addition, we analyze the proposed zero-skipping architecture in detail. Finally, we present the findings and lessons learned when implementing the commercial mobile NPU and interesting avenues for future work.

Emerging applications such as deep neural network demand high off-chip memory bandwidth. However, under stringent physical constraints of chip packages and system boards, it becomes very expensive to further increase the bandwidth of off-chip memory. Besides, transferring data across the memory hierarchy constitutes a large fraction of total energy consumption of systems, and the fraction has steadily increased with the stagnant technology scaling and poor data reuse characteristics of such emerging applications. To cost-effectively increase the bandwidth and energy efficiency, researchers began to reconsider the past processing-in-memory (PIM) architectures and advance them further, especially exploiting recent integration technologies such as 2.5D/3D stacking. Albeit the recent advances, no major memory manufacturer has developed even a proof-of-concept silicon yet, not to mention a product. This is because the past PIM architectures often require changes in host processors and/or application code which memory manufacturers cannot easily govern. In this paper, elegantly tackling the aforementioned challenges, we propose an innovative yet practical PIM architecture. To demonstrate its practicality and effectiveness at the system level, we implement it with a 20nm DRAM technology, integrate it with an unmodified commercial processor, develop the necessary software stack, and run existing applications without changing their source code. Our evaluation at the system level shows that our PIM improves the performance of memory-bound neural network kernels and applications by 11.2× and 3.5×, respectively. Atop the performance improvement, PIM also reduces the energy per bit transfer by 3.5×, and the overall energy efficiency of the system running the applications by 3.2×.