Modern servers require large main memories, which so far have been enabled by improvements in DRAM density. However, the scalability of DRAM is approaching its limit, so Phase-Change Memory (PCM) is being considered as an alternative technology. PCM is denser, more scalable, and consumes lower idle power than DRAM, while exhibiting byte-address ability and access times in the nanosecond range. Unfortunately, PCM is also slower than DRAM and has limited endurance. These characteristics prompted the study of hybrid memory systems, combining a small amount of DRAM and a large amount of PCM. In this paper, we leverage hybrid memories to improve the performance of cooperative memory caches in server clusters. Our approach entails a novel policy that exploits popularity information in placing objects across servers and memory technologies. Our results show that (1) DRAM-only and PCM-only memory systems do not perform well in all cases, and (2) when managed properly, hybrid memories always exhibit the best or close-to-best performance, with significant gains in many cases, without increasing energy consumption.

Main memory is responsible for a large and increasing fraction of the energy consumed by servers. Prior work has focused on exploiting DRAM low-power states to conserve energy. However, these states require entire DRAM ranks to be idled, which is difficult to achieve even in lightly loaded servers. In this paper, we propose to conserve memory energy while improving its energy-proportionality by creating active low-power modes for it. Specifically, we propose MemScale, a scheme wherein we apply dynamic voltage and frequency scaling (DVFS) to the memory controller and dynamic frequency scaling (DFS) to the memory channels and DRAM devices. MemScale is guided by an operating system policy that determines the DVFS/DFS mode of the memory subsystem based on the current need for memory bandwidth, the potential energy savings, and the performance degradation that applications are willing to withstand. Our results demonstrate that MemScale reduces energy consumption significantly compared to modern memory energy management approaches. We conclude that the potential benefits of the MemScale mechanisms and policy more than compensate for their small hardware cost.

Phase-Change Memory (PCM) technology has received substantial attention recently. Because PCM is byte-addressable and exhibits access times in the nanosecond range, it can be used in main memory designs. In fact, PCM has higher density and lower idle power consumption than DRAM. Unfortunately, PCM is also slower than DRAM and has limited endurance. For these reasons, researchers have proposed memory systems that combine a small amount of DRAM and a large amount of PCM. In this paper, we propose a new hybrid design that features a hardware-driven page placement policy. The policy relies on the memory controller (MC) to monitor access patterns, migrate pages between DRAM and PCM, and translate the memory addresses coming from the cores. Periodically, the operating system updates its page mappings based on the translation information used by the MC. Detailed simulations of 27 workloads show that our system is more robust and exhibits lower energy-delay2 than state-of-the-art hybrid systems.

Designing thermal management policies for todaypsilas power-dense server clusters is currently a challenge, since it is difficult to predict the exact temperature and performance that would result from trying to react to a thermal emergency. To address this challenge, in this paper we propose C-Oracle, a software infrastructure for Internet services that dynamically predicts the temperature and performance impact of different thermal management reactions into the future, allowing the thermal management policy to select the best reaction at each point in time. We experimentally evaluate C-Oracle for thermal management policies based on load redistribution and dynamic voltage/frequency scaling in both single-tier and multi-tier services. Our results show that, regardless of management policy or service organization, C-Oracle enables non-trivial decisions that effectively manage thermal emergencies, while avoiding unnecessary performance degradation.

Power densities have been increasing rapidly at all levels of server systems. To counter the high temperatures resulting from these densities, systems researchers have recently started work on softwarebased thermal management. Unfortunately, research in this new area has been hindered by the limitations imposed by simulators and real measurements. In this paper, we introduce Mercury, a software suite that avoids these limitations by accurately emulating temperatures based on simple layout, hardware, and componentutilization data. Most importantly, Mercury runs the entire software stack natively, enables repeatable experiments, and allows the study of thermal emergencies without harming hardware reliability. We validate Mercury using real measurements and a widely used commercial simulator. We use Mercury to develop Freon, a system that manages thermal emergencies in a server cluster without unnecessary performance degradation. Mercury will soon become available from http://www.darklab.rutgers.edu.