The millimeter wave frequency spectrum offers unprecedented bandwidths for future broadband cellular networks. This paper presents the world's first empirical measurements for 28 GHz outdoor cellular propagation in New York City. Measurements were made in Manhattan for three different base station locations and 75 receiver locations over distances up to 500 meters. A 400 megachip-per-second channel sounder and directional horn antennas were used to measure propagation characteristics for future mm-wave cellular systems in urban environments. This paper presents measured path loss as a function of the transmitter - receiver separation distance, the angular distribution of received power using directional 24.5 dBi antennas, and power delay profiles observed in New York City. The measured data show that a large number of resolvable multipath components exist in both non line of sight and line of sight environments, with observed multipath excess delay spreads (20 dB) as great as 1388.4 ns and 753.5 ns, respectively. The widely diverse spatial channels observed at any particular location suggest that millimeter wave mobile communication systems with electrically steerable antennas could exploit resolvable multipath components to create viable links for cell sizes on the order of 200 m.

In this paper, we present reflection coefficients and penetration losses for common building materials at 28 GHz for the design and deployment of future millimeter wave mobile communication networks. Reflections from walls and buildings and penetration losses were measured for indoor and outdoor materials, such as tinted glass, clear glass, brick, concrete, and drywall at 28 GHz in New York City. A 400 Mega-chip-per-second sliding correlator channel sounder and 24.5 dBi steerable horn antennas were used to emulate future mobile devices with adaptive antennas that will likely be used in future millimeter wave cellular systems [1]. Measurements in and around buildings show that outdoor building materials are excellent reflectors with the largest measured reflection coefficient of 0.896 for tinted glass as compared to indoor building materials that are less reflective. We also found that penetration loss is dependent not only on the number of obstructions and distance between transmitter and receiver, but also on the surrounding environment. The greatest penetration loss containing three interior walls of an office building was found to be 45.1 dB, with 11.39 m separation between the transmitter and receiver.

Propagation measurements at 28 GHz were conducted in outdoor urban environments in New York City using four different transmitter locations and 83 receiver locations with distances of up to 500 m. A 400 mega- chip per second channel sounder with steerable 24.5 dBi horn antennas at the transmitter and receiver was used to measure the angular distributions of received multipath power over a wide range of propagation distances and urban settings. Measurements were also made to study the small-scale fading of closely-spaced power delay profiles recorded at half-wavelength (5.35 mm) increments along a small-scale linear track (10 wavelengths, or 107 mm) at two different receiver locations. Our measurements indicate that power levels for small- scale fading do not significantly fluctuate from the mean power level at a fixed angle of arrival. We propose here a new lobe modeling technique that can be used to create a statistical channel model for lobe path loss and shadow fading, and we provide many model statistics as a function of transmitter- receiver separation distance. Our work shows that New York City is a multipath-rich environment when using highly directional steerable horn antennas, and that an average of 2.5 signal lobes exists at any receiver location, where each lobe has an average total angle spread of 40.3° and an RMS angle spread of 7.8°. This work aims to create a 28 GHz statistical spatial channel model for future 5G cellular networks.

This tutorial presents an overview of the technological advances in millimeter-wave (mm-wave) circuit components, antennas, and propagation that will soon allow 60-GHz transceivers to provide multigigabit per second (multi-Gb/s) wireless communication data transfers in the consumer marketplace. Our goal is to help engineers understand the convergence of communications, circuits, and antennas, as the emerging world of subterahertz and terahertz wireless communications will require understanding at the intersections of these areas. This paper covers trends and recent accomplishments in a wide range of circuits and systems topics that must be understood to create massively broadband wireless communication systems of the future. In this paper, we present some evolving applications of massively broadband wireless communications, and use tables and graphs to show research progress from the literature on various radio system components, including on-chip and in-package antennas, radio-frequency (RF) power amplifiers (PAs), low-noise amplifiers (LNAs), voltage-controlled oscillators (VCOs), mixers, and analog-to-digital converters (ADCs). We focus primarily on silicon-based technologies, as these provide the best means of implementing very low-cost, highly integrated 60-GHz mm-wave circuits. In addition, the paper illuminates characterization techniques that are required to competently design and fabricate mm-wave devices in silicon, and illustrates effects of the 60-GHz RF propagation channel for both in-building and outdoor use. The paper concludes with an overview of the standardization and commercialization efforts for 60-GHz multi-Gb/s devices, and presents a novel way to compare the data rate versus power efficiency for future broadband devices.

This paper reviews recent developments in vehicular radar at 60 GHz and above, with a focus on low cost integrated antennas. We investigate a number of radar and communication antenna systems that can be made inexpensively and in large volumes using standard CMOS semiconductor fabrication methods. As shown here, the electromagnetic characteristics of low cost CMOS processes are often not well understood when applied to mmWave and THz RF applications. Here, we describe several methodologies and measured results to understand electromagnetic behavior of integrated circuits and on-chip antenna performance in a 180 nm CMOS process up to 67 GHz. By gaining understanding of the electrical characteristics of older, lower cost semiconductor CMOS processes, it becomes possible to design mmWave on-chip antennas and other passive devices at extremely low cost and with great reliability.

We present several on-chip antenna structures that may be fabricated with standard CMOS technology for use at millimeter wave frequencies. On-chip antennas for wireless personal area networks (WPANs) promise to reduce interconnection losses and greatly reduce wireless transceiver costs, while providing unprecedented flexibility for device manufacturers. We present the current state of research in on-chip integrated antennas, highlight several pitfalls and challenges for on-chip design, modeling, and measurement, and propose several antenna structures that derive from the microwave and HF communication fields. We also describe an experimental test apparatus for performing measurements on RFIC systems with on-chip antennas at The University of Texas at Austin.

This paper presents several on-chip antenna structures that may be fabricated with standard CMOS technology for use at millimeter wave frequencies. On-chip antennas for wireless personal area networks (WPANs) promise to reduce interconnection losses and greatly reduce wireless transceiver costs, while providing unprecedented flexibility for device manufacturers. This paper presents the current state of research in on-chip integrated antennas, highlights several pitfalls and challenges for on-chip design, modeling, and measurement, and proposes several antenna structures that derive from the microwave microstrip and amateur radio art. This paper also describes an experimental test apparatus for performing measurements on RFIC systems with on-chip antennas developed at The University of Texas at Austin.